An Inductorless DC–DC Converter for an Energy Aware Power Management Unit Aimed at Microbial Fuel Cell Arrays

This paper introduces an inductorless dc-dc converter for an energy-aware power management unit aimed at microbial fuel cell (MFC) arrays capable of performing a dc step-up gain of up to 10× and achieving efficient maximum power point (MPP) tracking. Due to the MFC's varying power profile over time, identifying and selecting the best MFC harvesting point enhances efficiency and overall power delivery. Currently, MFC series or parallel connections have limited application due to the voltage reversal issue present in MFCs; this makes time multiplexing harvesting a more reliable approach. However, each time a new MFC is allotted the time for harvesting, a new MPP is required. The proposed converter dynamically adapts to achieve MPP as well as adjust the converter's own power consumption to maximize efficiency. The converter was designed and fabricated in 0.18-μm CMOS process and shows a maximum efficiency of 65% for 1.6 mW of input power.

[1]  David Blaauw,et al.  A Modular 1 mm$^{3}$ Die-Stacked Sensing Platform With Low Power I$^{2}$C Inter-Die Communication and Multi-Modal Energy Harvesting , 2013, IEEE Journal of Solid-State Circuits.

[2]  Mani B. Srivastava,et al.  Emerging techniques for long lived wireless sensor networks , 2006, IEEE Communications Magazine.

[3]  Henry Shu-Hung Chung,et al.  Development of a multistage current-controlled switched-capacitor step-down DC/DC converter with continuous input current , 2000 .

[4]  I. Chang,et al.  Mass Transport through a Proton Exchange Membrane (Nafion) in Microbial Fuel Cells , 2008 .

[5]  J. Chae,et al.  A High-Efficiency DC–DC Boost Converter for a Miniaturized Microbial Fuel Cell , 2015, IEEE Transactions on Power Electronics.

[6]  Adrian Ioinovici,et al.  Step-up DC power supply based on a switched-capacitor circuit , 1995, IEEE Trans. Ind. Electron..

[7]  Sophia Ktori.  Growing power [Energy Microbacterial Batteries] , 2013 .

[8]  Edgar Sánchez-Sinencio,et al.  Boost Converter With Dynamic Input Impedance Matching for Energy Harvesting With Multi-Array Thermoelectric Generators , 2014, IEEE Transactions on Industrial Electronics.

[9]  Jae-Do Park,et al.  High efficiency energy harvesting from microbial fuel cells using a synchronous boost converter , 2012 .

[10]  Sang-Eun Oh,et al.  Voltage reversal during microbial fuel cell stack operation , 2007 .

[11]  Anantha Chandrakasan,et al.  A Battery-Less Thermoelectric Energy Harvesting Interface Circuit With 35 mV Startup Voltage , 2010, IEEE Journal of Solid-State Circuits.

[12]  Chulwoo Kim,et al.  A Single-Input Four-Output (SIFO) AC–DC Rectifying System for Vibration Energy Harvesting , 2014, IEEE Transactions on Power Electronics.

[13]  T Tanzawa.  On Two-Phase Switched-Capacitor Multipliers With Minimum Circuit Area , 2010, IEEE Transactions on Circuits and Systems I: Regular Papers.

[14]  Andrea Montecucco,et al.  Maximum Power Point Tracking Converter Based on the Open-Circuit Voltage Method for Thermoelectric Generators , 2015, IEEE Transactions on Power Electronics.

[15]  V. Agarwal,et al.  On the Input Resistance of a Reconfigurable Switched Capacitor DC–DC Converter-Based Maximum Power Point Tracker of a Photovoltaic Source , 2012, IEEE Transactions on Power Electronics.

[16]  Slobodan Cuk,et al.  A general unified approach to modelling switching-converter power stages , 1976, 1970 IEEE Power Electronics Specialists Conference.

[17]  J. F. Dickson,et al.  On-chip high-voltage generation in MNOS integrated circuits using an improved voltage multiplier technique , 1976 .

[18]  Zhiyong Ren,et al.  Hysteresis-Controller-Based Energy Harvesting Scheme for Microbial Fuel Cells With Parallel Operation Capability , 2012, IEEE Transactions on Energy Conversion.

[19]  Hongwei Gao,et al.  Energy Harvesting With Microbial Fuel Cell and Power Management System , 2011, IEEE Transactions on Power Electronics.

[20]  P. de Figueiredo,et al.  Air-cathode microbial fuel cell array: a device for identifying and characterizing electrochemically active microbes. , 2011, Biosensors & bioelectronics.

[21]  Yi-Chun Shih,et al.  An Inductorless DC–DC Converter for Energy Harvesting With a 1.2-$ \mu\hbox{W}$ Bandgap-Referenced Output Controller , 2011, IEEE Transactions on Circuits and Systems II: Express Briefs.

[22]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[23]  Edgar Sanchez-Sinencio,et al.  Power Management System With Integrated Maximum Power Extraction Algorithm for Microbial Fuel Cells , 2015, IEEE Transactions on Energy Conversion.

[24]  P. R. Bandyopadhyay,et al.  An Electronic Circuit for Trickle Charge Harvesting From Littoral Microbial Fuel Cells , 2013, IEEE Journal of Oceanic Engineering.

[25]  Mario Huemer,et al.  Modeling, Control, and Implementation of DC–DC Converters for Variable Frequency Operation , 2014, IEEE Transactions on Power Electronics.

[26]  Paul de Figueiredo,et al.  Microfabricated Microbial Fuel Cell Arrays Reveal Electrochemically Active Microbes , 2009, PloS one.

[27]  Los Angeles,et al.  Low-Power Low-Jitter On-Chip Clock Generation , 2003 .

[28]  Matthew S. Trotter,et al.  Effect of DC to DC converters on organic solar cell arrays for powering DC loads , 2009 .

[29]  Hong Liu,et al.  Quantification of the internal resistance distribution of microbial fuel cells. , 2008, Environmental science & technology.

[30]  Behzad Razavi,et al.  Design of high-speed, low-power frequency dividers and phase-locked loops in deep submicron CMOS , 1995, IEEE J. Solid State Circuits.

[31]  Chris Van Hoof,et al.  Capacitive Power Management Circuit for Micropower Thermoelectric Generators With a 1.4 $\mu$A Controller , 2009, IEEE Journal of Solid-State Circuits.

[32]  C. Vollaire,et al.  Strategy for Microwave Energy Harvesting From Ambient Field or a Feeding Source , 2012, IEEE Transactions on Power Electronics.

[33]  M. Ghangrekar,et al.  Performance of microbial fuel cell subjected to variation in pH, temperature, external load and substrate concentration. , 2009, Bioresource technology.

[34]  Chi-Ying Tsui,et al.  Charge redistribution loss consideration in optimal charge pump design , 2005, 2005 IEEE International Symposium on Circuits and Systems.

[35]  V.G. Oklobdzija,et al.  Improved sense-amplifier-based flip-flop: design and measurements , 2000, IEEE Journal of Solid-State Circuits.

[36]  Zainal Salam,et al.  A Simple Energy Recovery Scheme to Harvest the Energy from Shaded Photovoltaic Modules During Partial Shading , 2014, IEEE Transactions on Power Electronics.

[37]  Fan Zhang,et al.  A Batteryless 19 $\mu$W MICS/ISM-Band Energy Harvesting Body Sensor Node SoC for ExG Applications , 2013, IEEE Journal of Solid-State Circuits.

[38]  B. Logan,et al.  Powering microbial electrolysis cells by capacitor circuits charged using microbial fuel cell , 2013 .

[39]  Robert W. Erickson,et al.  DC-DC converter design for battery-operated systems , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[40]  G. Palumbo,et al.  Charge-pump circuits: power-consumption optimization , 2002 .

[41]  Paul de Figueiredo,et al.  A microfluidic microbial fuel cell array that supports long-term multiplexed analyses of electricigens. , 2012, Lab on a chip.

[42]  James McLaughlin,et al.  “Deglorifying” the Maximum Power Transfer Theorem and Factors in Impedance Selection , 2007, IEEE Transactions on Education.