Fiber Optic Sensors in Structural Health Monitoring
暂无分享,去创建一个
Antonio Quintela Incera | J M Lopez-Higuera | Luis Rodriguez Cobo | Antonio Quintela Incera | A Cobo | J. López-Higuera | A. Cobo | L. R. Cobo | L. Rodriguez Cobo | A. Quintela Incera | Adolfo Cobo
[1] Govind P. Agrawal,et al. Nonlinear Fiber Optics , 1989 .
[2] Denis Donlagic,et al. All-fiber Fabry-Perot strain sensor , 2004, European Workshop on Optical Fibre Sensors.
[3] Yufeng Zhang,et al. Structural health monitoring of PC structures with novel types of distributed sensors , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[4] Zuyuan He,et al. Distributed strain measurement with millimeter-order spatial resolution based on Brillouin optical correlation domain analysis. , 2006, Optics letters.
[5] Nobuo Takeda,et al. Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors , 2000 .
[6] C. Galindez,et al. Influence of Humidity on the Measurement of Brillouin Frequency Shift , 2008, IEEE Photonics Technology Letters.
[7] Hao Zhang,et al. Temperature-independent FBG pressure sensor with high sensitivity , 2007 .
[8] B. Soller,et al. High Resolution Distributed Strain or Temperature Measurements in Single-and Multi-mode Fiber Using Swept-Wavelength Interferometry , 2006 .
[9] Yun-Jiang Rao. Long-period fiber gratings for low-cost sensing (Invited Paper) , 2005, International Conference on Optical Fibre Sensors.
[10] Manuel Lopez-Amo and Jose Miguel Lopez-Higuera. Multiplexing Techniques for FBG Sensors , 2011 .
[11] H. Henschel,et al. The use of optical time domain reflectometers to measure radiation-induced losses in optical fibers , 1994 .
[12] Samuel Vurpillot,et al. Monitoring of a concrete arch bridge during construction , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[13] L. Thévenaz,et al. Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .
[14] Trevor P. Newson,et al. 150-km-range distributed temperature sensor based on coherent detection of spontaneous Brillouin backscatter and in-line Raman amplification , 2005 .
[15] M. Dupont,et al. Damage detection in a radome sandwich material with embedded fiber optic sensors , 2000 .
[16] Richard O. Claus,et al. Self-assembled nanostructured optical fiber sensors (Invited Paper) , 2005, International Conference on Optical Fibre Sensors.
[17] Alan J. Rogers. Distributed optical fiber sensing , 1991, Other Conferences.
[18] Jie Lin,et al. Recent development and applications of optical and fiber-optic pH sensors , 2000 .
[19] Pieter L. Swart,et al. Non-contact torsion sensor using fibre Bragg gratings , 2004 .
[20] I J Read,et al. Sea and flight trials of optical fibre Bragg grating strain sensing systems , 2001 .
[21] T. L. Yeo,et al. Fibre-optic sensor technologies for humidity and moisture measurement , 2008 .
[22] Farhad Ansari,et al. Sensing issues in civil structural health monitoring , 2005 .
[23] Graham Thursby,et al. Hydrogel/fiber optic sensor for distributed measurement of humidity and pH value , 1998, Smart Structures.
[24] E. Joseph Friebele,et al. Optical fiber sensors for spacecraft applications , 1999, International Conference on Optical Fibre Sensors.
[25] Nikos Karafolas,et al. Fiber optic sensing in space structures: the experience of the European Space Agency (Invited Paper) , 2005, International Conference on Optical Fibre Sensors.
[26] Jin-Hak Yi,et al. Structural Health Monitoring System for “Uldolmok” Tidal Current Power Pilot Plant and Its Applications , 2009 .
[27] D R Hjelme,et al. Application of Bragg grating sensors in the characterization of scaled marine vehicle models. , 1997, Applied optics.
[28] Pascal Mauron,et al. Reliability of fiber Bragg grating based sensors for downhole applications , 2003 .
[29] S. A. Kingsley,et al. OFDR diagnostics for fibre and integrated-optic systems , 1985 .
[30] Akira Mita,et al. Health monitoring system using FBG-based sensors for a 12-story building with column dampers , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[31] Richard O. Claus,et al. Optical Fiber Humidity Sensor with a Fast Response Time Using the Ionic Self-Assembly Method , 2000 .
[32] F. Arregui,et al. Optical fiber humidity sensor based on a tapered fiber coated with agarose gel , 2000 .
[33] Konstantin Golant,et al. Versatile in-fiber Bragg grating pressure sensor for oil and gas industry , 2006 .
[34] Zuyuan He,et al. Measurement range enlargement in Brillouin optical correlation-domain reflectometry based on temporal gating scheme. , 2009, Optics express.
[35] Kenneth T. V. Grattan,et al. Demonstration of a fibre-optic sensing technique for the measurement of moisture absorption in concrete , 2006 .
[36] Vadakke Matham Murukeshan,et al. Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors , 2000 .
[37] Peter L. Fuhr,et al. Corrosion detection in reinforced concrete roadways and bridges via embedded fiber optic sensors , 1998 .
[38] Jung-Ryul Lee,et al. In-flight health monitoring of a subscale wing using a fiber Bragg grating sensor system , 2003 .
[39] Ines Latka,et al. Fibre optic sensor network for spacecraft health monitoring , 2001 .
[40] Hojjat Adeli,et al. Monitoring the behavior of steel structures using distributed optical fiber sensors , 2000 .
[41] Meng-Tsan Tsai,et al. Fiber optic in-line distributed sensor for detection and localization of the pipeline leaks , 2007 .
[42] Zhang Yuan Zhong,et al. Oil Well Real-time Monitoring With Downhole Permanent FBG Sensor Network , 2007, 2007 IEEE International Conference on Control and Automation.
[43] M. Giordano,et al. Experimental modal analysis of an aircraft model wing by embedded fiber Bragg grating sensors , 2006, IEEE Sensors Journal.
[44] Jason S. Kiddy,et al. Fiber optic structural health monitoring system: rough sea trials testing of the RV Triton , 2002, OCEANS '02 MTS/IEEE.
[45] Michael D. Todd,et al. Distributed Strain Monitoring with Arrays of Fiber Bragg Grating Sensors on an In-Construction Steel Box-Girder Bridge (Special Issue on Optical Fiber Sensors) , 2000 .
[46] Ian F. C. Smith,et al. A new system for early chloride detection in concrete , 2008 .
[47] Nicole Jaffrezic-Renault,et al. Elaboration of an optical fibre corrosion sensor for aircraft applications , 2004 .
[48] Xueguang Qiao,et al. Distributed optical fiber Bragg grating sensor for simultaneous measurement of pressure and temperature in the oil and gas downhole , 2002, SPIE ITCom.
[49] Daniele Inaudi,et al. Structural health monitoring system for the new I-35W St Anthony Falls Bridge , 2009 .
[50] R. Narayanaswarny,et al. Optical sensors , 2005, 2005 Asian Conference on Sensors and the International Conference on New Techniques in Pharmaceutical and Biomedical Research.
[51] Mary Austin. Sensor application opportunities for aerospace propulsion systems , 2009, 2009 IEEE Avionics, Fiber-Optics and Phototonics Technology Conference.
[52] Brahim Benmokrane,et al. Structural health monitoring of innovative bridges in Canada with fiber optic sensors , 2001 .
[53] Reinhardt Willsch,et al. Spectrally encoded optical fibre sensor systems and their application in process control, environmental and structural monitoring , 2005, SPIE Optics + Optoelectronics.
[54] Yahei Koyamada,et al. Brillouin optical-fiber time domain reflectometry , 1993 .
[55] Hwa-Yaw Tam,et al. High pressure sensor based on photonic crystal fiber for downhole application , 2010 .
[56] D R Walt,et al. In situ fluorescence imaging of localized corrosion with a pH-sensitive imaging fiber. , 1997, Analytical chemistry.
[57] Hy Tam,et al. Utilization of fiber optic bragg grating sensing systems for health monitoring in railway applications , 2007 .
[58] A. Cobo,et al. Simple low-frequency optical fiber accelerometer with large rotating machine monitoring applications , 1997 .
[59] R. Kashyap. Fiber Bragg Gratings , 1999 .
[60] Hamid Latifi,et al. Fiber optic Fabry-Perot pressure sensor with low sensitivity to temperature changes for downhole application , 2007 .
[61] Nobuo Takeda,et al. Detection of impact damage of stiffened composite panels using embedded small-diameter optical fibers , 2004 .
[62] Chung-Yue Wang,et al. Structural Health Monitoring Activities of Applying Optical Fiber Sensors in Taiwan , 2006 .
[63] Daniel Albrecht,et al. Remote structural monitoring of the Cathedral of Como using an optical fiber Bragg sensor system , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[64] Kazuo Hotate. Correlation-based continuous-wave technique for optical fiber distributed strain measurement using Brillouin scattering (Invited Paper) , 2005, International Conference on Optical Fibre Sensors.
[65] X. Bao,et al. Distributed brillouin scattering sensor for discrimination of wall-thinning defects in steel pipe under internal pressure. , 2004, Applied optics.
[66] Brian Culshaw,et al. Engineering a High-Tech Business , 2008 .
[67] J. N. Ross,et al. Distributed optical fibre Raman temperature sensor using a semiconductor light source and detector , 1985 .
[68] Jean-Francois Masson,et al. Single-crystal sapphire-fiber optic sensors based on surface plasmon resonance spectroscopy for in situ monitoring. , 2005, Talanta.
[69] Israel Herszberg,et al. Sensitivity of embedded fibre optic Bragg grating sensors to disbonds in bonded composite ship joints , 2004 .
[70] Kazuro Kageyama,et al. Smart marine structures: an approach to the monitoring of ship structures with fiber-optic sensors , 1998 .
[71] Francisco J. Arregui,et al. Self-assembled nanostructured optical fiber sensors , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[72] W. Michie,et al. Distributed Water Ingress and Water Potential Measurements using Fibre Optics , 1997 .
[73] Veijo Lyöri. Structural monitoring with fibre-optic sensors using the pulsed time-of-flight method and other measurement techniques , 2007 .
[74] Keith Worden,et al. An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.
[75] Carlos Galindez,et al. Brillouin frequency shift of standard optical fibers set in water vapor medium. , 2010, Optics letters.
[76] E. Speranzini,et al. Fiber Bragg grating strain sensors for in situ analysis and monitoring of fiber-reinforced historical civil structures , 2008, International Conference on Vibration Measurements by Laser Techniques: Advances and Applications.
[77] Sebastian G. M. KrFernando. Fiber Optic Sensor Network for Lightning Impact Localization and Classification in Wind Turbines , 2006 .
[78] Fanyong Meng,et al. High pressure and temperature sensing for the downhole applications , 2007, SPIE Optics East.
[79] Per Johan Nicklasson,et al. Ice sensors for wind turbines , 2006 .
[80] Marco Domaneschi,et al. Damage assessment from SOFO dynamic measurements , 2005, International Conference on Optical Fibre Sensors.
[81] Gerard Franklyn Fernando,et al. In-situ process and condition monitoring of advanced fibre-reinforced composite materials using optical fibre sensors , 1998 .
[82] N. Takeda,et al. Structural Health Monitoring of Cracked Aircraft Panels Repaired with Bonded Patches Using Fiber Bragg Grating Sensors , 2006 .
[83] Daniele Inaudi,et al. Bridge spatial displacement monitoring with 100 fiber optic deformation sensors: sensors network and preliminary results , 1997, Smart Structures.
[84] Haiying Huang,et al. An optical fiber-based corrosion sensor based on laser light reflection , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[85] Branko Glisic,et al. Fibre Optic Methods for Structural Health Monitoring: Glišić/Fibre Optic Methods for Structural Health Monitoring , 2007 .
[86] A. B. Ganesh,et al. Fiber-optic sensor for the estimation of microbial corrosion of metals , 2009 .
[87] Sandeep T. Vohra,et al. Ship hull structure monitoring using fibre optic sensors , 2001 .
[88] Jung-Ryul Lee,et al. Structural health monitoring for a wind turbine system: a review of damage detection methods , 2008 .
[89] Kazuo Hotate,et al. Monitoring Aircraft Structural Health Using Optical Fiber Sensors , 2008 .
[90] R. Claus,et al. Optical fiber humidity sensor using a nano Fabry–Perot cavity formed by the ionic self-assembly method , 1999 .
[91] Pedro Corredera,et al. Distributed Brillouin Fiber Sensor Assisted by First-Order Raman Amplification , 2010, Journal of Lightwave Technology.
[92] Toshio Kurashima,et al. Measurement of temperature and strain distribution by Brillouin frequency shift in silica optical fibers , 1993, Other Conferences.
[93] Walter Grahn,et al. Fiber optic sensors for an in-situ monitoring of moisture and pH value in reinforced concrete , 2002, SPIE Optics + Photonics.
[94] K. Bohnert,et al. Temperature and vibration insensitive fiber-optic current sensor , 2000, International Conference on Optical Fibre Sensors.
[95] David P. Fries,et al. Development of stripped-cladding optical fiber sensors for continuous monitoring II: Referencing method for spectral sensing of environmental corrosion , 2007 .
[96] Xiaoyi Bao,et al. Simultaneous strain and temperature monitoring of the composite cure with a Brillouin-scattering-based distributed sensor , 2002 .
[97] Aníbal Costa,et al. Weldable fibre Bragg grating sensors for steel bridge monitoring , 2008 .
[98] Antonio Quintela Incera,et al. Fiber optic civil structure monitoring system , 2005 .
[99] Fabio Matta,et al. Distributed Strain Measurement in Steel Bridge with Fiber Optic Sensors: Validation through Diagnostic Load Test , 2008 .
[100] Nobuo Takeda,et al. Aircraft structural-health monitoring using optical fiber distributed BOTDR sensors , 2004 .
[101] Nobuo Takeda,et al. Structural health monitoring of composite wing structure during durability test , 2007 .
[102] Darryll J. Pines,et al. Fiber optic sensors monitoring transmission ring gears , 2007, SPIE Optics East.
[103] T. Horiguchi,et al. Distributed-temperature sensing using stimulated Brillouin scattering in optical silica fibers. , 1990, Optics letters.
[104] Branko Glisic,et al. SHM process as perceived through 350 projects , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[105] Detlef Hofmann,et al. Lightning-safe diaphragm pressure gauge for geotechnical applications using a long-term reliable absolute EFPI sensor , 2004, European Workshop on Optical Fibre Sensors.
[106] Jose Miguel Lopez-Higuera. Fibre Optic Sensors in Structural Health Monitoring , 2010 .
[107] Y. M. Gebremichael,et al. Methodology and integrity monitoring of foundation concrete piles using Bragg grating optical fibre sensors , 2007 .
[108] X. Bao,et al. 32-km distributed temperature sensor based on Brillouin loss in an optical fiber. , 1993, Optics letters.
[109] S. Yee,et al. A fiber-optic chemical sensor based on surface plasmon resonance , 1993 .
[110] D. Jackson,et al. Potential of stimulated Brillouin scattering as sensing mechanism for distributed temperature sensors , 1989 .
[111] F. P. Kapron,et al. Fiber-optic reflection measurements using OCWR and OTDR techniques , 1989 .
[112] Kenneth T. V. Grattan,et al. Chloride ion optical sensing using a long period grating pair , 2008 .
[113] Branko Glisic,et al. Fibre Optic Methods for Structural Health Monitoring , 2007 .
[114] Hamid Latifi,et al. An improved fiber optic pressure and temperature sensor for downhole application , 2009 .
[115] Kazuo Hotate. Coherent Photonic Sensing , 1999 .
[116] Wolfgang Ecke,et al. A fibre Bragg grating sensor system monitors operational load in a wind turbine rotor blade , 2006 .