Experiences Determining the AC Current Rating of HTS Tapes in Power Transformers

NA

[1]  A C Lapthorn,et al.  HTS Transformer: Construction Details, Test Results, and Noted Failure Mechanisms , 2011, IEEE Transactions on Power Delivery.

[2]  Pat Bodger,et al.  An Experimental High Temperature Superconducting Transformer: Design, Construction and Testing , 2010 .

[3]  Pat Bodger,et al.  Superconducting transformer failure: Testing and investigation , 2009, 2009 Australasian Universities Power Engineering Conference.

[4]  E. Talantsev,et al.  Critical current anisotropy for second generation HTS wires , 2008 .

[5]  Simon Colin Bell,et al.  High-voltage partial-core resonant transformers , 2008 .

[6]  Pat Bodger,et al.  Lightning Arc Drawings - Dielectric Barrier Discharges for Artwork , 2007 .

[7]  Pat Bodger,et al.  A low-voltage, mains frequency, partial core, high temperature, superconducting transformer , 2005 .

[8]  M. Polák,et al.  Test results of 14 kVA superconducting transformer with Bi-2223/Ag windings , 2003 .

[9]  Pat Bodger,et al.  Partial-core transformer design using reverse modelling techniques , 2001 .

[10]  N. Kelley,et al.  High temperature superconducting cable field demonstration at Detroit Edison , 2001 .

[11]  P. Haldar,et al.  Design and development of a 15 kV, 20 kA HTS fault current limiter , 2000, IEEE Transactions on Applied Superconductivity.

[12]  S. Salon,et al.  Performance of a 1-MVA HTS demonstration transformer , 1999, IEEE Transactions on Applied Superconductivity.

[13]  Jakob Rhyner,et al.  Test of 1.2 MVA high- superconducting fault current limiter , 1997 .

[14]  Ismo V. Lindell,et al.  Methods for Electromagnetic Field Analysis , 1992 .