Design tradeoffs of an oil-hydraulic power take-off for wave energy converters

Abstract This paper presents the main design tradeoffs that should be handled when developing oil-hydraulic Power Take-Off devices aiming at the maximization of energy extraction from waves with a point absorber wave energy converter. These tradeoffs were identified in a case study of a new Power Take-Off concept. The simulation results have shown that improvement of Power Take-Off harvested power is followed by a substantial increase on the power peaks that can be 10 to 30 times above the average power. This demands extreme operational conditions on the Power Take-Off components and an undesirable decrease of overall efficiency. The size of the system, in particular, of the main hydraulic pump, is also substantially increased. Thus, the addition of accumulators, to control the pump size, is recommendable, in particular for storage and release of reactive energy to the Power Take-Off oil-hydraulic cylinders.

[1]  Jicheng Xia,et al.  Experimentally Validated Models of O-Ring Seals for Tiny Hydraulic Cylinders , 2014 .

[2]  John Ringwood,et al.  Finite order approximations to radiation forces for wave energyapplications , 2014 .

[3]  Dahai Zhang,et al.  An overview of hydraulic systems in wave energy application in China , 2012 .

[4]  R. H. Hansen.  Design and Control of the PowerTake-Off System for a Wave Energy Converter with Multiple Absorbers , 2013 .

[5]  C. Guedes Soares,et al.  Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters , 2017 .

[6]  C. Guedes Soares,et al.  Speed control of oil-hydraulic power take-off system for oscillating body type wave energy converters , 2016 .

[7]  Dahai Zhang,et al.  Review of hydraulic transmission technologies for wave power generation , 2015 .

[8]  Rico Hjerm Hansen,et al.  Model based design of efficient power take-off systems for wave energy converters , 2011 .

[9]  C. Soares,et al.  Review and classification of wave energy converters , 2012 .

[10]  António F.O. Falcão,et al.  Wave energy utilization: A review of the technologies , 2010 .

[11]  Torgeir Moan,et al.  Bond graph modelling of a wave energy conversion system with hydraulic power take-off☆ , 2012 .

[12]  H. E. Merritt,et al.  Hydraulic Control Systems , 1991 .

[13]  M. N. Sahinkaya,et al.  A review of wave energy converter technology , 2009 .

[14]  António F.O. Falcão,et al.  Modelling and control of oscillating-body wave energy converters with hydraulic power take-off and gas accumulator , 2007 .

[15]  S H Salter,et al.  Power conversion mechanisms for wave energy , 2002 .

[16]  Hubertus Murrenhoff,et al.  Component Analysis for Hydrostatic Transmission for Wave Energy Application: Simulation and Validation , 2015 .

[17]  M. A. Stables,et al.  A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas. , 2010 .

[18]  Duarte Valério,et al.  Optimisation of wave energy extraction with the Archimedes Wave Swing , 2007 .

[19]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[20]  António F.O. Falcão,et al.  Phase control through load control of oscillating-body wave energy converters with hydraulic PTO system , 2008 .

[21]  Torben O. Andersen,et al.  Analysis of discrete pressure level systems for Wave Energy Converters , 2011, Proceedings of 2011 International Conference on Fluid Power and Mechatronics.

[22]  George A. Aggidis,et al.  Optimizing the shape of a surge-and-pitch wave energy collector using a genetic algorithm , 2010 .

[23]  Ross Henderson,et al.  Design, simulation, and testing of a novel hydraulic power take-off system for the Pelamis wave energy converter , 2006 .

[24]  Enrique Vidal,et al.  Discrete Displacement Hydraulic Power Take-Off System for the Wavestar Wave Energy Converter , 2013 .

[25]  Zbigniew Michalewicz,et al.  Handbook of Evolutionary Computation , 1997 .

[26]  Rico Hjerm Hansen,et al.  Design of full scale wave simulator for testing Power Take Off systems for wave energy converters , 2016 .

[27]  C. Guedes Soares,et al.  Power take-off concept for wave energy converters based on oil-hydraulic transformer units , 2016 .

[28]  Torgeir Moan,et al.  Dynamic analysis of wave energy converter by incorporating the effect of hydraulic transmission lines , 2011 .

[29]  Xin-She Yang,et al.  Engineering Optimization: An Introduction with Metaheuristic Applications , 2010 .

[30]  Maider Santos,et al.  Design, Construction and Testing of a Hydraulic Power Take-Off for Wave Energy Converters , 2012 .

[31]  S. N. Sivanandam,et al.  Introduction to genetic algorithms , 2007 .

[32]  A. P. McCabe.  Constrained optimization of the shape of a wave energy collector by genetic algorithm , 2013 .

[33]  Rico Hjerm Hansen,et al.  Modelling and Control of the Wavestar Prototype , 2011 .

[34]  Rico Hjerm Hansen,et al.  Early Performance Assessment of the Electrical Output of Wavestar's prototype , 2012 .