Thermodynamic criteria for the removal of impurities from end-of-life magnesium alloys by evaporation and flux treatment

Abstract In this paper, the possibility of removing impurities during magnesium recycling with pyrometallurgical techniques has been evaluated by using a thermodynamic analysis. For 25 different elements that are likely to be contained in industrial magnesium alloys, the equilibrium distribution ratios between the metal, slag and gas phases in the magnesium remelting process were calculated assuming binary systems of magnesium and an impurity element. It was found that calcium, gadolinium, lithium, ytterbium and yttrium can be removed from the remelted end-of-life (EoL) magnesium products by oxidization. Calcium, cerium, gadolinium, lanthanum, lithium, plutonium, sodium, strontium and yttrium can be removed by chlorination with a salt flux. However, the other elements contained in magnesium alloy scrap are scarcely removed and this may contribute toward future contamination problems. The third technological option for the recycling of EoL magnesium products is magnesium recovery by a distillation process. Based on thermodynamic considerations, it is predicted that high-purity magnesium can be recovered through distillation because of its high vapor pressure, yet there is a limit on recoverability that depends on the equilibrium vapor pressure of the alloying elements and the large energy consumption. Therefore, the sustainable recycling of EoL magnesium products should be an important consideration in the design of advanced magnesium alloys or the development of new refining processes.

[1]  C. Peng,et al.  Thermodynamic reassessment of Ga-Hg and Mg-Hg systems , 2009 .

[2]  D. Bae,et al.  Application of quasicrystalline particles as a strengthening phase in Mg–Zn–Y alloys , 2002 .

[3]  Hans Leo Lukas,et al.  Investigation of the AlMgSi system by experiments and thermodynamic calculations , 1997 .

[4]  Robert U. Ayres,et al.  Sustainable metals management : securing our future - steps towards a closed loop economy , 2006 .

[5]  M. Ohno,et al.  Phase equilibria, thermodynamics and solidification microstructures of Mg–Sn–Ca alloys, Part 2: Prediction of phase formation in Mg-rich Mg–Sn–Ca cast alloys , 2008 .

[6]  A. Pelton,et al.  Thermodynamic calculation of phase diagrams of the 60 common-ion ternary systems containing cations Li, Na, K, Rb, Cs and anions F, Cl, Br, I , 1991 .

[7]  N. Saunders,et al.  A review and thermodynamic assessment of the Al-Mg and Mg-Li systems , 1990 .

[8]  Helmut Antrekowitsch,et al.  Recycling automotive magnesium scrap , 2002 .

[9]  Akira Yazawa,et al.  Thermodynamic considerations of copper smelting , 1974 .

[10]  M. Medraj,et al.  Thermodynamic modeling of the Mg-Al-Sb system , 2005 .

[11]  I. Barin.  Thermochemical data of pure substances , 1989 .

[12]  X. J. Liu,et al.  Thermodynamic modeling of the Mg-Pu and Cu-Pu systems , 2009 .

[13]  Zi-kui Liu,et al.  Modification of the thermodynamic model for the Mg–Zr system , 2005 .

[14]  M. Medraj,et al.  A computational thermodynamic model of the Mg-Al-Ge system , 2006 .

[15]  P. Chartrand,et al.  Thermodynamic evaluation and optimization of the LiCl-NaCl-KCl-RbCl-CsCl-MgCl2-CaCl2 system using the modified quasi-chemical model , 2001 .

[16]  Shinichiro Nakamura,et al.  Thermodynamic analysis of contamination by alloying elements in aluminum recycling. , 2010, Environmental science & technology.

[17]  M. Bamberger,et al.  Trends in the Development of New Mg Alloys , 2008 .

[18]  Z. Du,et al.  Thermodynamic optimization of the Mg-Tb and Mg-Yb systems , 2006 .

[19]  Zi-kui Liu,et al.  Thermodynamic modeling of the Al–Mg–Na system , 2006 .

[20]  M. Medraj,et al.  Thermodynamic assessment of the Mg–Zn–Sr system , 2007 .

[21]  Thermodynamic reevaluation of the Mg–Tl system , 2008 .

[22]  Changrong Li,et al.  A thermodynamic description of the Gd–Mg–Y system , 2007 .

[23]  Donald T. Hawkins,et al.  Selected Values of the Thermodynamic Properties of the Elements , 1973 .

[24]  Liming Peng,et al.  Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloy , 2007 .

[25]  O. Chang-Seok,et al.  Assessment of the mg-bi system , 1992 .

[26]  Qudong Wang,et al.  Investigation of flux containing GdCl3 on recycling Mg-Gd-Y-Zr scraps , 2008 .

[27]  A. Pelton,et al.  Phase diagrams and thermodynamic properties of the 70 binary alkali halide systems having common ions , 1987 .

[28]  Hui Zhang,et al.  Thermodynamic modeling of Mg–Ca–Ce system by combining first-principles and CALPHAD method , 2008 .

[29]  J. Gröbner,et al.  Experimental investigation and thermodynamic calculation of binary Mg-Mn phase equilibria , 2005 .

[30]  Kenichi Nakajima,et al.  Evaluation Method of Metal Resource Recyclability Based on Thermodynamic Analysis , 2009 .

[31]  S. Gorsse,et al.  A thermodynamic assessment of the CuMgNi ternary system , 2002 .

[32]  G. Vojta,et al.  Phase Equilibria, Phase Diagrams and Phase Transformations. Their Thermodynamic Basis , 1999 .

[33]  I. Barin,et al.  Thermochemical properties of inorganic substances , 1973 .