Crashworthiness optimization of combined straight-tapered tubes using genetic algorithm and neural networks

Abstract This paper was aimed to evaluate crashworthiness capability of new designed multi-cell structures with different cross-sectional shapes (i.e. square, hexagonal, octagonal, decagonal and circular) to dissipate collision energy. The multi-cell structures included outer and inner tubes connected together by four stiffening plates. Two dimensional parameters (i.e. S1 and S2) were defined to describe cross sectional configuration of the structures. Indeed, S1 and S2 were ratios of the inner tube side length to the outer tube side length at the ends of the structures. Values of both S1 and S2 were assumed as 0, 0.25, 0.5, 0.75 and 1. Longitudinal geometry of the outer tube was straight; while, both the straight or tapered geometry could be generated for the inner tube depending on the values of S1 and S2. An experimentally validated model generated in finite element code LS-DYNA was utilized to study crushing behavior of these structures under axial impact. Geometrical dimensions of these structures were optimized using ANNs (artificial neural networks) and GA (genetic algorithm) by considering three different scenarios. The optimal structures were compared together from the crashworthiness point of view by considering two conflicting crashworthiness indicators namely SEA (specific energy absorption) and PCF (peak crush force) using a decision making method called TOPSIS (technique for ordering preferences by similarity to ideal solution). Ranking of the studied cross sections was obtained as Octagonal-Circular-Decagonal-Hexagonal-Square for all the mentioned scenarios. Consequently, octagonal multi-cell structure was selected as the best cross sectional configuration among the studied cross sections. In addition, the proposed octagonal multi-cell structure was found to have higher crashworthiness capacity than conventional single-cell and simple multi-cell ones.

[1]  Jianguang Fang,et al.  On design of multi-cell tubes under axial and oblique impact loads , 2015 .

[2]  Heung-Soo Kim,et al.  New extruded multi-cell aluminum profile for maximum crash energy absorption and weight efficiency , 2002 .

[3]  Leonardo Lecce,et al.  Simulation of low velocity impact on composite laminates with progressive failure analysis , 2013 .

[4]  Yucheng Liu,et al.  Crashworthiness design of multi-corner thin-walled columns , 2008 .

[5]  Daining Fang,et al.  Axial crushing behaviors of multi-cell tubes with triangular lattices , 2014 .

[6]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[7]  Shingo Ozaki,et al.  Crushing behaviour of hexagonal thin-walled tube with partition plates (1st report, analysis of deformation mode) , 2006 .

[8]  Robert J. Schalkoff,et al.  Artificial neural networks , 1997 .

[9]  Hany El Kadi,et al.  Crushing behavior of laterally compressed composite elliptical tubes: Experiments and predictions using artificial neural networks , 2008 .

[10]  Yunbo Liu,et al.  Development of simplified finite element models for straight thin-walled tubes with octagonal cross section , 2007 .

[11]  Xiaodong Huang,et al.  Comparison of functionally-graded structures under multiple loading angles , 2015 .

[12]  A. A. Singace,et al.  Uniaxial crushing of constrained tubes , 2001 .

[13]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[14]  Guilin Wen,et al.  Crashworthiness optimization design for foam-filled multi-cell thin-walled structures , 2014 .

[15]  Zhichao Huang,et al.  Experimental and theoretical investigations on lateral crushing of aluminum foam-filled circular tubes , 2017 .

[16]  Qing Li,et al.  Multiobjective crashworthiness optimization of hollow and conical tubes for multiple load cases , 2014 .

[17]  Melanie Mitchell,et al.  An introduction to genetic algorithms , 1996 .

[18]  Bertan Bayram,et al.  The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading , 2010 .

[19]  A. A. Nia,et al.  Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections , 2014 .

[20]  A. Alavi Nia,et al.  An investigation on the energy absorption characteristics of multi-cell square tubes , 2013 .

[21]  G. Cheng,et al.  Theoretical prediction and numerical simulation of multi-cell square thin-walled structures , 2006 .

[22]  Wang Dong.  Energy-absorbing characteristics of a tapered multi-cell thin-walled tube under oblique impact , 2012 .

[23]  Guangyao Li,et al.  Crashworthiness optimization of foam-filled tapered thin-walled structure using multiple surrogate models , 2013 .

[24]  Hui Zhang,et al.  Energy absorption of multi-cell stub columns under axial compression , 2013 .

[25]  Abolfazl Khalkhali,et al.  Best compromising crashworthiness design of automotive S-rail using TOPSIS and modified NSGAII , 2015 .

[26]  Xu Han,et al.  Multiobjective optimization for tapered circular tubes , 2011 .

[27]  G. Cheng,et al.  A comparative study of energy absorption characteristics of foam-filled and multi-cell square columns , 2007 .

[28]  Yunkai Gao,et al.  Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases , 2015 .

[29]  Qiang Gao,et al.  Crushing analysis and multiobjective crashworthiness optimization of foam-filled ellipse tubes under oblique impact loading , 2016 .

[30]  Qing Li,et al.  Design optimization of regular hexagonal thin-walled columns with crashworthiness criteria , 2007 .

[31]  Kamran Behdinan,et al.  Numerical simulation of the axial collapse of thin-walled polygonal section tubes , 2005 .

[32]  Tatacipta Dirgantara,et al.  Crashworthiness analysis of multi-cell prismatic structures , 2015 .

[33]  M. Królak,et al.  Experimental tests of stability and load carrying capacity of compressed thin-walled multi-cell columns of triangular cross-section , 2007 .

[34]  Xiong Zhang,et al.  Axial crushing of circular multi-cell columns , 2014 .

[35]  S. Sapuan,et al.  Effect of geometry on crashworthiness parameters of natural kenaf fibre reinforced composite hexagonal tubes , 2014 .

[36]  W. Abramowicz,et al.  Stress profiles in thin-walled prismatic columns subjected to crush loading II. Compression , 1994 .

[37]  Hosein Rafiai,et al.  Artificial neural networks as a basis for new generation of rock failure criteria , 2011 .

[38]  Sadjad Pirmohammad,et al.  Crushing behavior of new designed multi-cell members subjected to axial and oblique quasi-static loads , 2016 .

[39]  Javad Marzbanrad,et al.  Multi-Objective Optimization of aluminum hollow tubes for vehicle crash energy absorption using a genetic algorithm and neural networks , 2011 .

[40]  Qing Li,et al.  On design of multi-cell thin-wall structures for crashworthiness , 2016 .

[41]  Sadjad Pirmohammad,et al.  Collapse study of thin-walled polygonal section columns subjected to oblique loads , 2007 .

[42]  Gérard Gary,et al.  Dynamic crushing behaviour of aluminium tubes filled with cork , 2006 .

[43]  E. Acar,et al.  Multi-objective crashworthiness optimization of tapered thin-walled tubes with axisymmetric indentations , 2011 .

[44]  Yucheng Liu,et al.  Bending collapse of thin-walled circular tubes and computational application , 2008 .

[45]  Oluleke Oluwole,et al.  Numerical modelling of the effect of non-propagating crack in circular thin-walled tubes under dynamic axial crushing , 2017 .

[46]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[47]  Zonghua Zhang,et al.  Analysis of energy absorption characteristics of cylindrical multi-cell columns , 2013 .