Estimation of Cutting Temperature in High-Feed-Speed Machining of Carbon Fiber-Reinforced Thermoplastics

[1]  Z. Zhang,et al.  Effect of rapid curing process on the properties of carbon fiber/epoxy composite fabricated using vacuum assisted resin infusion molding , 2014 .

[2]  Laurent Berthe,et al.  Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures , 2014 .

[3]  Uday K. Vaidya,et al.  Effects of moisture and UV exposure on liquid molded carbon fabric reinforced nylon 6 composite laminates , 2009 .

[4]  M Sain,et al.  Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites. , 2006, Bioresource technology.

[5]  M. H. Attia,et al.  Characterization and optimization of vibration-assisted drilling of fibre reinforced epoxy laminates , 2013 .

[6]  Jens P. Wulfsberg,et al.  Combination of Carbon Fibre Sheet Moulding Compound and Prepreg Compression Moulding in Aerospace Industry , 2014 .

[7]  Takashi Inoue,et al.  Cutting Characteristics of CFRP Materials with Carbon Fiber Distribution , 2013, Int. J. Autom. Technol..

[8]  Tetsuya Tashiro,et al.  Drilling of CFRP/Ti6Al4V Stack Board , 2013, Int. J. Autom. Technol..

[9]  K. Krishnamurthy,et al.  A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates , 1996 .

[10]  Hong Hocheng,et al.  Delamination reduction in drilling composite materials by active backup force , 2012 .

[11]  Berend Denkena,et al.  Ultrafast Feed Drilling of Carbon Fiber-Reinforced Thermoplastics☆ , 2015 .

[12]  Akira Hosokawa,et al.  High-quality machining of CFRP with high helix end mill , 2014 .

[13]  Deyuan Zhang,et al.  Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP) , 2012 .

[14]  Kevin Kerrigan,et al.  Temperature Measurement in CFRP Milling Using a Wireless Tool-Integrated Process Monitoring Sensor , 2013, Int. J. Autom. Technol..

[15]  Takashi Inoue,et al.  Effect of Carbon Fiber Orientation and Helix Angle on CFRP Cutting Characteristics by End-Milling , 2013, Int. J. Autom. Technol..

[16]  Kenju Akai,et al.  AHP Analysis of the Preference of Engineers for Suitable CFRP for Automobile Parts , 2015, Int. J. Autom. Technol..

[17]  João Paulo Davim,et al.  Experimental delamination analyses of CFRPs using different drill geometries , 2013 .

[18]  Takashi Matsumura,et al.  Cutting Force Prediction in Drilling of Unidirectional Carbon Fiber Reinforced Plastics , 2015, Int. J. Autom. Technol..

[19]  Kay André Weidenmann,et al.  Machining strategies for hole making in composites with minimal workpiece damage by directing the process forces inwards , 2011 .