The users who use a combined GPS/Galileo receiver will benefit from an improved availability of the combined system and a reduced dependence on one particular positioning system. However, these users must solve the problem of an offset between the time scales of GPS and Galileo (GGTO). GGTO must be analyzed for not only a navigation system but also a timing system requesting precise time service. This paper analyzes the interoperability problem in a combined GPS/Galileo timing receiver and estimates the timing performance under various assumptions. The GPS real measurements were collected by using the commercial timing receiver from Ashtech Ltd. and the Galileo measurements were generated by a simulation software. A suitable test scenario set-up and the performance in a point of timing stability was evaluated.