Dispersion optimization to enhance PHB production in fed-batch cultures of Ralstonia eutropha.

Despite its many useful properties, microbial production of poly-beta-hydroxybutyrate (PHB) is not yet commercially competitive with synthetic polymers. One reason is inadequate optimization of the fermentation under industrial conditions. In this study, a physiologically reasonable and experimentally validated kinetic model for PHB synthesis by Ralstonia eutropha was incorporated into a dispersion model to simulate a large fed-batch bioreactor. Solutions of the model indicated that cell growth and PHB synthesis were maximum at Peclet numbers (Pe) between 20 and 30, representing limited finite dispersion. At these Peclet numbers, the optimum feed rates also showed lower consumptions of the substrates than at Pe=0. Since complete dispersion was also difficult to achieve in production-scale bioreactors, these results pointed to the possibility of exploiting controlled dispersion for productivity enhancement.

[1]  Jose M. Pinto,et al.  Optimal control of bioreactors: a simultaneous approach for complex systems , 2004 .

[2]  Juan Hong,et al.  Application of nonsingular transformation to on-line optimal control of poly-β-hydroxybutyrate fermentation , 1997 .

[3]  P. R. Patnaik.  A heuristic approach to fed-batch optimisation of streptokinase fermentation , 1995 .

[4]  P. R. Patnaik,et al.  Improvement of the microbial production of streptokinase by controlled filtering of process noise , 1999 .

[5]  H. Chang,et al.  Production of poly(3‐hydroxybutyric acid) by fed‐batch culture of Alcaligenes eutrophus with glucose concentration control , 1994, Biotechnology and bioengineering.

[6]  A. Mulchandani,et al.  Substrate inhibition kinetics for microbial growth and synthesis of poly-β-hydroxybutyric acid by Alcaligenes eutrophus ATCC 17697 , 2004, Applied Microbiology and Biotechnology.

[7]  J H Luong,et al.  Generalization of monod kinetics for analysis of growth data with substrate inhibition , 1987, Biotechnology and bioengineering.

[8]  H. Chang,et al.  Production of poly(hydroxyalkanoic acid). , 1995, Advances in biochemical engineering/biotechnology.

[9]  A. Steinbüchel.  PHB and Other Polhydroxyalkanoic Acids , 2001 .

[10]  G. Froment,et al.  Chemical Reactor Analysis and Design , 1979 .

[11]  Ashok K. Srivastava,et al.  Model-based fed-batch cultivation of R. eutropha for enhanced biopolymer production , 2004 .

[12]  H Shi,et al.  Dynamics and modeling on fermentative production of poly (beta-hydroxybutyric acid) from sugars via lactate by a mixed culture of Lactobacillus delbrueckii and Alcaligenes eutrophus. , 1999, Journal of biotechnology.

[13]  Kazuyuki Shimizu,et al.  Control of a mixed culture of Lactobacillus delbrueckii and ralstonia eutropha for the production of PHB from glucose via lactate , 1999 .

[14]  P. Patnaik.  Effect of fluid dispersion on cybernetic control of microbial growth on substitutable substrates , 2003, Bioprocess and biosystems engineering.

[15]  R. Luedeking,et al.  A kinetic study of the lactic acid fermentation. Batch process at controlled pH. Reprinted from Journal of Biochemical and Microbiological Technology Engineering Vol. I, No. 4. Pages 393-412 (1959). , 2000, Biotechnology and bioengineering.

[16]  A. Anderson,et al.  Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates. , 1990, Microbiological reviews.

[17]  P. R. Patnaik,et al.  Incomplete mixing in large bioreactors — a study of its role in the fermentative production of streptokinase , 1996 .

[18]  J. Pradella,et al.  Production of poly(3-hydroxybutyrate) in an airlift bioreactor by Ralstonia eutropha , 2004 .

[19]  C L Cooney,et al.  Design and evalution of control strategies for high cell density fermentations , 1992, Biotechnology and bioengineering.

[20]  Y. Chisti,et al.  Fermentation optimization for the production of poly(β-hydroxybutyric acid) microbial thermoplastic , 1999 .

[21]  P. Patnaik.  Enhancement of protein activity in a recombinant fermentation by optimizing fluid dispersion and initial plasmid copy number distribution , 2001 .

[22]  Gary Montague,et al.  A sub-optimal solution to the optimisation of bioreactors using the chemotaxis algorithm , 1994 .

[23]  Shahrokh Shahhosseini,et al.  Simulation and optimisation of PHB production in fed-batch culture of Ralstonia eutropha , 2004 .

[24]  G. Braunegg,et al.  Polyhydroxyalkanoates, biopolyesters from renewable resources: physiological and engineering aspects. , 1998, Journal of biotechnology.

[25]  Y. Doi,et al.  Cyclic nature of poly(3-hydroxyalkanoate) metabolism in Alcaligenes eutrophus. , 1990, FEMS microbiology letters.

[26]  Gunnar Lidén,et al.  Understanding the bioreactor , 2002 .

[27]  K. Shimizu,et al.  Effect of controlling lactate concentration and periodic change in DO concentration on fermentation characteristics of a mixed culture of Lactobacillus delbrueckii and Ralstonia eutropha for PHB production. , 2000, Journal of bioscience and bioengineering.

[28]  H. Noorman,et al.  Substrate gradients in bioreactors: origin and consequences , 1996 .

[29]  J. Wang,et al.  Kinetic analysis on formation of poly(3-hydroxybutyrate) from acetic acid by Ralstonia eutropha under chemically defined conditions , 2001, Journal of Industrial Microbiology and Biotechnology.

[30]  W. Babel,et al.  Physiology, regulation, and limits of the synthesis of poly(3HB). , 2001, Advances in biochemical engineering/biotechnology.