Effect of elastic anisotropy on strain relief and residual stress determination in cubic systems by FIB-DIC experiments

Abstract Focused Ion Beam milling and Digital Image Correlation analysis (FIB-DIC) method has been shown to offer an effective measure of residual stresses in coatings and bulk materials. In the present work the effect of elastic anisotropy on the residual stress interpretation from FIB-DIC measurements is studied for single crystals with cubic symmetry. Crystal orientation-dependent, elastically anisotropic 3D finite element models of the double slot milling geometry were developed and verified against FIB-DIC measurements performed on in situ four point bent samples of nanocrystalline nickel and single crystal CMSX-6 alloy. A discussion is presented of the limitations of the simplified assumptions vs full anisotropic modelling.

[1]  Ze Chai,et al.  Effect of shot peening on the residual stresses and microstructure of tungsten cemented carbide , 2016 .

[2]  Carles Cané,et al.  Digital image correlation of nanoscale deformation fields for local stress measurement in thin films , 2006 .

[3]  K. Durst,et al.  Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy , 2013 .

[4]  H. Warlimont,et al.  The elastic behaviour of β2-NiAl alloys , 1977 .

[5]  A. Lunt,et al.  A state-of-the-art review of micron-scale spatially resolved residual stress analysis by FIB-DIC ring-core milling and other techniques , 2015 .

[6]  Alexander M. Korsunsky,et al.  Focused ion beam ring drilling for residual stress evaluation , 2009 .

[7]  Mathias Göken,et al.  A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation , 2013 .

[8]  C. Cane,et al.  Residual Stress Measurement on a MEMS Structure With High-Spatial Resolution , 2007, Journal of Microelectromechanical Systems.

[9]  Marco Sebastiani,et al.  Depth-resolved residual stress analysis of thin coatings by a new FIB–DIC method , 2011 .

[10]  R. Reed.  The Superalloys: Fundamentals and Applications , 2006 .

[11]  Michele Dassisti,et al.  Methods of measuring residual stresses in components , 2012 .

[12]  Alexander M. Korsunsky,et al.  Focused ion beam four-slot milling for Poisson's ratio and residual stress evaluation at the micron scale , 2014 .

[13]  M. Sebastiani,et al.  Influence of Ti–TiN multilayer PVD-coatings design on residual stresses and adhesion , 2015 .

[14]  A. Korsunsky,et al.  Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation , 2010 .

[15]  J. Eckert,et al.  Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study , 2014 .

[16]  M. Jenko,et al.  FIB damage of Cu and possible consequences for miniaturized mechanical tests , 2007 .

[17]  P. Withers,et al.  Mapping Residual Stress Distributions at the Micron Scale in Amorphous Materials , 2010 .

[18]  A. G. Evans,et al.  A method for in situ measurement of the residual stress in thin films by using the focused ion beam , 2003 .

[19]  Alexander M. Korsunsky,et al.  Uncertainty quantification of residual stress evaluation by the FIB–DIC ring-core method due to elastic anisotropy effects , 2016 .

[20]  P. Withers,et al.  Novel implementations of relaxation methods for measuring residual stresses at the micron scale , 2015 .