Sensing delamination in epoxy encapsulant systems with fiber Bragg gratings

Fiber Bragg gratings (FBGs) are well-suited for embedded sensing of interfacial phenomena in materials systems, due to the sensitivity of their spectral response to locally non-uniform strain fields. Over the last 15 years, FBGs have been successfully employed to sense delamination at interfaces, with a clear emphasis on planar events induced by transverse cracks in fiber-reinforced plastic laminates. We have built upon this work by utilizing FBGs to detect circular delamination events at the interface between epoxy films and alumina substrates. Two different delamination processes are examined, based on stress relief induced by indentation of the epoxy film or by cooling to low temperature. We have characterized the spectral response pre- and post-delamination for both simple and chirped FBGs as a function of delamination size. We show that delamination is readily detected by the evolution of a non-uniform strain distribution along the fiber axis that persists after the stressing condition is removed. These residual strain distributions differ substantially between the delamination processes, with indentation and cooling producing predominantly tensile and compressive strain, respectively, that are well-captured by Gaussian profiles. More importantly, we observe a strong correlation between spectrally-derived measurements, such as spectral widths, and delamination size. Our results further highlight the unique capabilities of FBGs as diagnostic tools for sensing delamination in materials systems.

[1]  Stephen F Collins,et al.  Determination of the position of a localized heat source within a chirped fibre Bragg grating using a Fourier transform technique , 2006 .

[2]  Nobuo Takeda,et al.  Development of small-diameter optical fiber sensors for damage detection in composite laminates , 2000, Smart Structures.

[3]  Hongtao Wang,et al.  Research on non-uniform strain profile reconstruction along fiber Bragg grating via genetic programming algorithm and interrelated experimental verification , 2014 .

[4]  Nobuo Takeda,et al.  Detection of microscopic damages in composite laminates , 2002 .

[5]  Nobuo Takeda,et al.  A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors , 2005 .

[6]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .

[7]  Anand Asundi,et al.  Real-time cure monitoring of smart composite materials using extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors , 2002 .

[8]  Nobuo Takeda,et al.  Damage identification in a holed CFRP laminate using a chirped fiber Bragg grating sensor , 2007 .

[9]  A Cobo,et al.  Recovering a fiber Bragg grating axial strain distribution from its reflection spectrum. , 2013, Optics letters.

[10]  Nobuo Takeda,et al.  Estimation of the damage patterns in notched laminates with embedded FBG sensors , 2006 .

[11]  Nobuo Takeda,et al.  Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors , 2002 .

[12]  S. L. Ogin,et al.  Use of a surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test , 2012 .

[13]  Michele Giordano,et al.  Strain monitoring of composite elements by fibre Bragg grating sensors during a quasi-static indentation , 2014 .

[14]  Nobuo Takeda,et al.  Application of chirped fiber Bragg grating sensors for identification of crack locations in composites , 2004 .

[15]  D. J. Kitchera,et al.  Localized strain measurements using an integration method to process intensity reflection spectra from a chirped FBG , 2007 .

[16]  Gerald Meltz,et al.  Fiber Optic Bragg Grating Sensors , 1990, Other Conferences.

[17]  M. Leblanc,et al.  Continuous arbitrary strain profile measurements with fiber Bragg gratings , 1998 .

[18]  S.F. Collins,et al.  Implementation of integration of differences method for extraction of temperature profiles along chirped fibre Bragg gratings , 2006, ACOFT/AOS 2006 - Australian Conference on Optical Fibre Technology/Australian Optical Society.

[19]  Dominique Leduc,et al.  Architecture of optical fiber sensor for the simultaneous measurement of axial and radial strains , 2013 .

[20]  Wei-Ping Huang.  Coupled-mode theory for optical waveguides: an overview , 1994 .

[21]  Nobuo Takeda,et al.  Application of chirped FBG sensors for detection of local delamination in composite laminates , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[22]  Anthony G. Evans,et al.  Measurement of adherence of residually stressed thin films by indentation. I. Mechanics of interface delamination , 1984 .

[23]  Lo Yu-Lung,et al.  Measurement of thermal expansion coefficients using an in-fibre Bragg-grating sensor , 1998 .

[24]  Nobuo Takeda,et al.  Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing , 2005 .

[25]  A. Othonos.  Fiber Bragg gratings , 1999 .

[26]  P. Rastogi,et al.  Relative humidity sensor with optical fiber Bragg gratings. , 2002, Optics letters.

[27]  Nobuo Takeda,et al.  Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors , 2000 .

[28]  Y. Okabe,et al.  Quantitative evaluation of transverse cracks in carbon fiber reinforced plastic quasi-isotropic laminates with embedded small-diameter fiber Bragg grating sensors , 2003 .

[29]  M Leblanc,et al.  Distributed strain measurement based on a fiber Bragg grating and its reflection spectrum analysis. , 1996, Optics letters.

[30]  Nobuo Takeda,et al.  Delamination monitoring of laminated composites subjected to low-velocity impact using small-diameter FBG sensors , 2005 .

[31]  J. Bokor,et al.  Bragg gratings fabricated in monomode photosensitive optical fiber by UV exposure through a phase mask , 1993 .

[32]  In-Soo Kim,et al.  A Temperature-Insensitive Cladding-Etched Fiber Bragg Grating Using a Liquid Mixture with a Negative Thermo-Optic Coefficient , 2012, Sensors.

[33]  Shijie Zheng,et al.  Strain profile reconstruction of fiber Bragg grating with gradient using chaos genetic algorithm and modified transfer matrix formulation , 2008 .

[34]  Aniello Riccio,et al.  Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: An experimental study , 2014 .

[35]  John Botsis,et al.  On a direct determination of non-uniform internal strain fields using fibre Bragg gratings , 2005 .

[36]  Nobuo Takeda,et al.  Detection of edge delamination in CFRP laminates under cyclic loading using small-diameter FBG sensors , 2003 .

[37]  Yu-Lung Lo,et al.  The synthesis of multiple parameters of arbitrary FBGs via a genetic algorithm and two thermally modulated intensity spectra , 2005, Journal of Lightwave Technology.

[38]  T. L. Yeo,et al.  Characterisation of a polymer-coated fibre Bragg grating sensor for relative humidity sensing , 2005 .

[39]  Karen Hutchins.  Measurement of Interfacial Adhesion in Glass-Epoxy Systems Using the Indentation Method , 2015 .

[40]  Hsu-Chih Cheng,et al.  Arbitrary strain distribution measurement using a genetic algorithm approach and two fiber Bragg grating intensity spectra , 2004 .