A framework for fracture assessments of dissimilar girth welds in offshore pipelines under bending
暂无分享,去创建一个
Zhiliang Zhang | Claudio Ruggieri | Rodolfo F. de Souza | Rodolfo F. de Souza | Zhiliang Zhang | C. Ruggieri
[1] Bjørn Skallerud,et al. Thin shell and surface crack finite elements for simulation of combined failure modes , 2005 .
[2] Peter J. Budden,et al. Reference Stress Approximations for J and COD of Circumferential Through-Wall Cracked Pipes , 2002 .
[3] Uwe Zerbst,et al. Review on fracture and crack propagation in weldments - A fracture mechanics perspective , 2014 .
[4] John W. Hutchinson,et al. Fully Plastic Solutions and Large Scale Yielding Estimates for Plane Stress Crack Problems , 1976 .
[6] J. Hancock,et al. Two-Parameter Characterization of Elastic-Plastic Crack-Tip Fields , 1991 .
[7] Zhiliang Zhang,et al. On the interrelationship between fracture toughness and material mismatch for cracks located at the fusion line of weldments , 1999 .
[8] Robert A. Ainsworth,et al. A J integral estimation method for cracks in welds with mismatched mechanical properties , 1997 .
[9] Bård Nyhus,et al. SENT Specimens an Alternative to SENB Specimens for Fracture Mechanics Testing of Pipelines , 2003 .
[10] Uwe Zerbst,et al. Basic principles of analytical flaw assessment methods , 2000 .
[11] N. Dowling. Mechanical Behavior of Materials: Engineering Methods for Deformation, Fracture, and Fatigue , 1993 .
[12] Yun‐Jae Kim,et al. Mismatch limit loads and approximate J estimates for tensile plates with constant-depth surface cracks in the center of welds , 2007 .
[13] Bård Nyhus,et al. Effects of crack depth and specimen size on ductile crack growth of SENT and SENB specimens for fracture mechanics evaluation of pipeline steels , 2009 .
[14] H. Saunders,et al. Advanced Fracture Mechanics , 1985 .
[15] J. Hutchinson. Fundamentals of the Phenomenological Theory of Nonlinear Fracture Mechanics , 1983 .
[16] Rodolfo F. de Souza,et al. J–CTOD relations in clamped SE(T) fracture specimens including 3-D stationary and growth analysis , 2015 .
[17] ETD委員会基準化分科会. ASME Boiler & Pressure Vessel Code Sec. III NB/NC及び同Sec. III Div. 1/Div. 2の比較検討 , 1995 .
[18] P. J. Budden. Failure assessment diagram methods for strain-based fracture , 2006 .
[19] Uwe Zerbst,et al. SINTAP defect assessment procedure for strength mis-matched structures , 2000 .
[20] W. Drugan,et al. Theory of plasticity , 1987 .
[21] Michael Smith. Fitness for Service, API 579-1/ASME FFS-1 , 2007 .
[22] Noel P. O’Dowd,et al. Fully-Plastic Strain-Based J Estimation Scheme for Circumferential Surface Cracks in Pipes Subjected to Reeling , 2015 .
[23] Rudi Denys,et al. J-integral analysis of heterogeneous mismatched girth welds in clamped single-edge notched tension specimens , 2014 .
[24] F. M. Burdekin,et al. Engineering critical analyses to BS 7910 — the UK guide on methods for assessing the acceptability of flaws in metallic structures , 2000 .
[25] T. Anderson,et al. Fracture mechanics - Fundamentals and applications , 2017 .
[26] Bjørn Skallerud,et al. Fracture Control Offshore Pipelines: Advantages of Using Direct Calculations in Fracture Assessments of Pipelines , 2005 .
[27] A. Cornec,et al. Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mismatched welded joint , 1997 .
[28] Erlend Olso̸,et al. New Assessment Approach For ECA of Clad And Lined Pipes Based On Shell And Line-spring Finite Elements , 2011 .
[29] Tomasz Tkaczyk,et al. Fracture Assessment Procedures for Steel Pipelines Using a Modified Reference Stress Solution , 2009 .
[30] Soheil Manouchehri. A Discussion of Practical Aspects of Reeled Flowline Installation , 2012 .
[31] Zhongmin Xiao,et al. On 3-D crack problems in offshore pipeline with large plastic deformation , 2013 .
[32] Rudi Denys,et al. Constraint analysis of defects in strength mismatched girth welds of (pressurized) pipe and Curved Wide Plate tensile test specimens , 2014 .
[33] Yuh J. Chao,et al. EFFECT OF MECHANICAL PROPERTY MISMATCH ON FAILURE ASSESSMENT CURVE FOR WELDED JOINT WITH A SEMI-ELLIPTICAL CRACK , 2013 .
[34] Pei-Ning Li,et al. Limit load and J estimates of a centre cracked plate with an asymmetric crack in a mismatched weld , 1999 .
[35] Erling Østby. Fracture Control — Offshore Pipelines: New Strain-Based Fracture Mechanics Equations Including the Effects of Biaxial Loading, Mismatch, and Misalignment , 2005 .
[36] Matteo Chiesa,et al. Efficient fracture assessment of pipelines. A constraint-corrected SENT specimen approach , 2001 .
[37] Claudio Ruggieri,et al. J and CTOD estimation procedure for circumferential surface cracks in pipes under bending , 2010 .
[38] Nikzad Nourpanah,et al. Development of a reference strain approach for assessment of fracture response of reeled pipelines , 2010 .
[39] Indra Permana. A study on engineering critical assessment (ECA) of subsea pipeline girth welds for reeling installation , 2013 .
[40] Aurélien Pépin,et al. Methodology for Assessment of Surface Defects in Undermatched Pipeline Girth Welds , 2015 .
[41] Robert A. Ainsworth,et al. The estimation of J in three-point-bend specimens with a crack in a mismatched weld , 1997 .
[42] Claudio Ruggieri,et al. Fracture assessments of clad pipe girth welds incorporating improved crack driving force solutions , 2015 .