Pulsewidth Modulation Strategy in Double-Delta Sourced Winding

Power conversion systems based on double-delta sourced winding (DDSW) had an optimization issue in terms of pulsewidth modulation (PWM). This issue was about inefficient employments of voltage levels during PWM and had to be considered for minimizing voltage stresses and current ripples on DDSW. In this paper, a novel method has been proposed to improve the performance of PWM in DDSW-based systems. The proposed method can be simply implemented as a carrier-based PWM and its principles are neatly summarized with equations. Finally, the effectiveness of the proposed method is demonstrated with experimental results, which were obtained by using a transformer and an induction machine.

[1]  Seung-Ki Sul,et al.  Asymmetric Control of DC-Link Voltages for Separate MPPTs in Three-Level Inverters , 2013, IEEE Transactions on Power Electronics.

[2]  Joachim Holtz,et al.  On continuous control of PWM inverters in the overmodulation range including the six-step mode , 1992, Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation.

[3]  Domenico Casadei,et al.  A New Multilevel Conversion Structure for Grid-Connected PV Applications , 2009, IEEE Transactions on Industrial Electronics.

[4]  D. Casadei,et al.  Multilevel Operation and Input Power Balancing for a Dual Two-Level Inverter with Insulated DC Sources , 2008, IEEE Transactions on Industry Applications.

[5]  Danwei Wang,et al.  Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis [three-phase inverters] , 2002, IEEE Trans. Ind. Electron..

[6]  Seung-Ki Sul,et al.  Unified voltage modulation technique for real time three-phase power conversion , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[7]  H. van der Broeck,et al.  Analysis and Realization of a Pulse Width Modulator Based on Voltage Space Vectors , 1986, 1986 Annual Meeting Industry Applications Society.

[8]  Tobias Geyer,et al.  Modular High-Power Shunt-Interleaved Drive System: A Realization up to 35 MW for Oil and Gas Applications , 2010, IEEE Transactions on Industry Applications.

[9]  R. Rizzo,et al.  Three Winding Transformers for Smart Power Substations , 2019, 2019 8th International Conference on Modern Power Systems (MPS).

[10]  Seung-Ki Sul,et al.  Linear Overmodulation Strategy for Current Control in Photovoltaic Inverter , 2016, IEEE Transactions on Industry Applications.

[11]  Jeong-Mock Yoo,et al.  Vector Control of Double-Delta Sourced Winding for a Dual-Winding Induction Machine , 2017, IEEE Transactions on Industry Applications.

[12]  P. Enjeti,et al.  A new modular motor-modular inverter (MM-MI) concept for medium voltage adjustable speed drive systems , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[13]  Humberto Pinheiro,et al.  Flexible Arrangement Of Static Converters For Grid Connected Wind Energy Conversion Systems , 2013 .

[14]  S. Brisset,et al.  Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine , 2006, IEEE Transactions on Industry Applications.

[15]  Jeong-Mock Yoo,et al.  Current regulation and fault tolerance in Double-Delta Sourced Transformer , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[16]  Seung-Ki Sul,et al.  Multi-Level Operation with Two-Level Converters through a Double-Delta Source Connected Transformer , 2014 .

[17]  Prasad Enjeti,et al.  An inverter output filter to mitigate dV/dt effects in PWM drive system , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).