Cooperative material transport during the early stage of sintering.

The complex transport processes contributing to sintering are not yet fully understood, partially because in-situ observations of sintering in three dimensions (3D) are very difficult. Here we report a novel experiment in which monocrystalline copper spheres are first marked with microscopic boreholes drilled using a focused ion beam, after which high-resolution synchrotron X-ray tomography is carried out to measure translational, rolling and intrinsic rotation movements of some hundred spheres during sintering. Unlike in 1D and 2D systems, we show that, in 3D, intrinsic rotations are more pronounced than angular rolling rearrangements of the particle centres and become the dominant mechanism of particle movement. We conclude that in addition to the well-known neck growth and centre approach mechanisms, grain boundary sliding caused by the different crystallographic orientations of the individual spheres occurs.

[1]  S. Chan,et al.  Study of energy vs misorientation for grain boundaries in gold by crystallite rotation method—II. Tilt boundaries and mixed boundaries , 1986 .

[2]  B. Kieback,et al.  Investigation of Sintering of Spherical Copper Powder by Micro Focus Computed Tomography (μCT) and Synchrotron Tomography , 2007 .

[3]  Donald G. White.  State-of-the-North American P/M Industry - 2002 , 2000 .

[4]  F. Flores,et al.  Interfaces in crystalline materials , 1994, Thin Film Physics and Applications.

[5]  Dominique Bernard,et al.  First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomography , 2005 .

[6]  D. Bellet,et al.  Bulk observation of metal powder sintering by X-ray synchrotron microtomography , 2004 .

[7]  David L. Schaefer,et al.  State-of-the-North American P/M industry - 2003 , 2003 .

[8]  E. Lauridsen,et al.  X-ray microscopy in four dimensions , 2006 .

[9]  Didier Bouvard,et al.  In situ microtomography investigation of metal powder compacts during sintering , 2003 .

[10]  R. German.  Sintering theory and practice , 1996 .

[11]  F. Lange.  De-sintering, A Phenonmena Concurrent with Densification Within Powder Compacts: A Review , 1994 .

[12]  H. Mykura.  Grain boundary energy and the rotation and translation of Cu spheres during sintering onto a substrate , 1979 .

[13]  J. Banhart.  Advanced tomographic methods in materials research and engineering , 2008 .

[14]  R. Pond,et al.  On the relative rotation of unconstrained polycrystals , 1977 .

[15]  J. M. Merino,et al.  Fast microtomography using high energy synchrotron radiation , 2005 .

[16]  H. Exner,et al.  Particle Rearrangement and Pore Space Coarsening During Solid‐State Sintering , 2009 .

[17]  W. Schatt,et al.  The mechanism of the rotation of single-crystal spheres during sintering , 1984 .

[18]  Günter Petzow,et al.  Particle Rearrangement in Solid State Sintering , 1976, International Journal of Materials Research.

[19]  D. Bellet,et al.  3D statistical analysis of a copper powder sintering observed in situ by synchrotron microtomography , 2008 .

[20]  H. Exner,et al.  Review on computer simulations of sintering processes , 1998 .

[21]  E. Lauridsen,et al.  Recrystallization kinetics of individual bulk grains in 90% cold-rolled aluminium , 2003 .

[22]  D. Juul Jensen,et al.  Non-destructive mapping of grains in three dimensions , 2003 .

[23]  L. C. Jonghe,et al.  Rearrangement During Sintering in Two‐Dimensional Arrays , 1986 .

[24]  Takahisa Koyama,et al.  Fast X-ray micro-CT for real-time 4D observation , 2009 .

[25]  J. Buffière,et al.  Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis. , 2009, The Review of scientific instruments.

[26]  F. Aldinger,et al.  Equilibrium configuration of particles in sintering under constraint , 2003 .

[27]  R. German.  Powder metallurgy science , 1984 .

[28]  S. Stock.  Recent advances in X-ray microtomography applied to materials , 2008 .

[29]  W. Ludwig,et al.  Non-destructive analysis of micro texture and grain boundary character from X-ray diffraction contrast tomography , 2010 .

[30]  R. German.  Powder metallurgy and particulate materials processing : the processes, materials, products, properties and applications , 2005 .

[31]  The 3-dimensional X-ray diffraction microscope: 3D maps of grains and grain dynamics in polycrystalline materials , 2003 .

[32]  C. Hsueh,et al.  Particle Rotation in Early Sintering , 1984 .

[33]  F. Wakai.  Modeling and Simulation of Elementary Processes in Ideal Sintering , 2006 .