Modelling the injectivity, migration and trapping of CO2 in carbon capture and storage (CCS)

Abstract: CO 2 injection into subsurface geological formations induces changes in the state of the system, as characterised by local pressure and saturation changes. Being able to understand, predict, monitor and manage such changes is critical to the successful development of carbon capture and storage (CCS) projects. Key to this is the ability to model injectivity, migration and trapping of CO 2 . While injectivity can be understood using analytical models, migration and trapping calculations are generally carried out using numerical codes. A good understanding of the various trapping mechanisms can assist with developing engineering options to maximise storage capacity and security. The financial viability of CCS projects may be enhanced by consideration of CO 2 -enhanced oil recovery (EOR).

[1]  R. S. Haszeldine,et al.  Geological storage of CO2 : Site appraisal and modelling , 2011 .

[2]  Simon A. Mathias,et al.  Analytical solution for Joule-Thomson cooling during CO2 geo-sequestration in depleted oil and gas reservoirs , 2010 .

[3]  McMillan Burton,et al.  Eliminating Buoyant Migration of Sequestered CO2 Through Surface Dissolution: Implementation Costs and Technical Challenges , 2009 .

[4]  Paul Schofield,et al.  The Rotliegend reservoir in Block 30/24, UK Central North Sea: including the Argyll (renamed Ardmore) and Innes fields , 2003, Petroleum Geoscience.

[5]  Martin J. Blunt,et al.  Design of carbon dioxide storage , 2010 .

[6]  Charles Eickhoff,et al.  Effect of Common Impurities on the Phase Behavior of Carbon-Dioxide-Rich Systems: Minimizing the Risk of Hydrate Formation and Two-Phase Flow , 2011 .

[7]  Gillian Elizabeth Pickup,et al.  A Novel Method for CO2 Injection that Enhances Storage Capacity and Security , 2012 .

[8]  Hrvoje Galic,et al.  CO2 Injection Into Depleted Gas Reservoirs , 2009 .

[9]  Eric James Mackay,et al.  Evaluation of the CO2 Storage Capacity of the Captain Sandstone Formation , 2012 .

[10]  Eric James Mackay,et al.  Comparison of numerical codes for geochemical modelling of CO2 storage in target sandstone reservoirs , 2011 .

[11]  Eric James Mackay,et al.  Simulation of CO2 Storage In Saline Aquifers , 2006 .

[12]  Zhenhao Duan,et al.  An improved model calculating CO2 solubility in pure water and aqueous NaCl solutions from 273 to 533 K and from 0 to 2000 bar , 2003 .

[13]  Karsten Pruess,et al.  CO2-H2O Mixtures in the Geological Sequestration of CO2. II. Partitioning in Chloride Brines at 12-100oC and up to 600 bar , 2004 .

[14]  Martin J. Blunt,et al.  Design of carbon dioxide storage in aquifers , 2009 .

[15]  Eric James Mackay,et al.  Static and Dynamic Estimates of CO2-Storage Capacity in Two Saline Formations in the UK , 2012 .

[16]  Eric James Mackay,et al.  Use of rock mechanics laboratory data in geomechanical modelling to increase confidence in CO2 geological storage , 2012 .

[17]  Karsten Pruess,et al.  Mineral Sequestration of Carbon Dixoide in a Sandstone-Shale System , 2004 .

[18]  Mohamed Azaroual,et al.  Behaviour of the CO2 injection well and the near wellbore during carbon dioxide injection in saline aquifers , 2012 .

[19]  Eric James Mackay,et al.  Simulation of CO2 storage in a heterogeneous aquifer , 2009 .

[20]  Steven L. Bryant,et al.  On relative permeability data uncertainty and CO2 injectivity estimation for brine aquifers , 2013 .

[21]  Eric James Mackay,et al.  Simulation of near-well pressure build-up in models of CO2 injection , 2012 .

[22]  Karsten Pruess,et al.  CO2-H2O mixtures in the geological sequestration of CO2. I. Assessment and calculation of mutual solubilities from 12 to 100°C and up to 600 bar , 2003 .