Using a New Finite Slit Pore Model for NLDFT Analysis of Carbon Pore Structure

In this work, we present a model for analyzing activated carbon micropore structures based on graphene sheet walls of finite thickness and extent. This is a two-dimensional modification of the widely used infinite slit pore model that assumes graphite-like infinitely extended pore walls. The proposed model has two versions: (1) a strip pore constructed with graphene strip walls that have a finite length L in the x-direction and are infinite in the y-direction. Strip pores are open on both sides in the x-direction; (2) a channel pore, i.e. a strip pore partially closed along one edge by a perpendicularly orientated graphene wall. This more realistic model allows pore termination via both physical pore entrances and pore blockage. The model consequently introduces heterogeneity of the adsorption potential that is reduced near pore entrances and enhanced near the corners of pore walls. These energetically heterogeneous structures fill with adsorbate more gradually than homogeneous pores of the same width. As a result, the calculated adsorption isotherms are smoother and less steep for the finite versus the infinite pore model. In the application of this model for carbon characterization, it is necessary to make an assumption about the pore length. In this work, we made this assumption based on high-resolution scanning transmission electron microscopy (STEM) results. We find the agreement between the experiment and the model significantly better for the finite than for the infinite pore model.

[1]  D. A. Maia,et al.  Characterization of activated carbons from peach stones through the mixed geometry model , 2010 .

[2]  F. S. Baker,et al.  Atypical hydrogen uptake on chemically-activated, ultramicroporous carbon , 2010 .

[3]  J. P. Olivier,et al.  A Simple Two-Dimensional NLDFT Model of Gas Adsorption in Finite Carbon Pores. Application to Pore Structure Analysis , 2009 .

[4]  M. Thommes,et al.  Quenched solid density functional theory and pore size analysis of micro-mesoporous carbons , 2009 .

[5]  D. Siderius,et al.  Predicting gas adsorption in complex microporous and mesoporous materials using a new density functional theory of finely discretized lattice fluids. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[6]  P. A. Monson.  Mean field kinetic theory for a lattice gas model of fluids confined in porous materials. , 2008, Journal of Chemical Physics.

[7]  S. Pennycook,et al.  Chapter 2:Scanning Transmission Electron Microscopy , 2007 .

[8]  D. Do,et al.  Effect of pore constriction on adsorption behaviour in nanoporous carbon slit pore: a computer simulation , 2006 .

[9]  D. Do,et al.  The effects of energy sites on adsorption of Lennard-Jones fluids and phase transition in carbon slit pore of finite length a computer simulation study. , 2006, Journal of colloid and interface science.

[10]  D. Fu.  Investigation of excess adsorption, solvation force, and plate-fluid interfacial tension for Lennard-Jones fluid confined in slit pores. , 2006, The Journal of chemical physics.

[11]  D. Do,et al.  Pore size distribution analysis of activated carbons: Application of density functional theory using nongraphitized carbon black as a reference system , 2006 .

[12]  S. Bhatia,et al.  Characterization of pore wall heterogeneity in nanoporous carbons using adsorption: the slit pore model revisited , 2004 .

[13]  Jianzhong Wu,et al.  Structures of hard-sphere fluids from a modified fundamental-measure theory , 2002 .

[14]  L. Sarkisov,et al.  Modeling of Adsorption and Desorption in Pores of Simple Geometry Using Molecular Dynamics , 2001 .

[15]  A. Neimark,et al.  Unified Approach to Pore Size Characterization of Microporous Carbonaceous Materials from N2, Ar, and CO2 Adsorption Isotherms† , 2000 .

[16]  A. Neimark,et al.  Pore Size Analysis of MCM-41 Type Adsorbents by Means of Nitrogen and Argon Adsorption. , 1998, Journal of colloid and interface science.

[17]  W. Steele,et al.  Computer simulation in pores with rectangular cross-sections , 1998 .

[18]  N. Seaton,et al.  The effect of the choice of pore model on the characterization of the internal structure of microporous carbons using pore size distributions , 1998 .

[19]  J. P. Olivier.  Improving the models used for calculating the size distribution of micropore volume of activated carbons from adsorption data , 1998 .

[20]  J. Jagiello,et al.  Determination of the Pore Size Distribution and Network Connectivity in Microporous Solids by Adsorption Measurements and Monte Carlo Simulation , 1997 .

[21]  R. Cracknell,et al.  Determination of Micropore Size Distribution from Grand Canonical Monte Carlo Simulations and Experimental CO2 Isotherm Data , 1997 .

[22]  J. P. Olivier.  Modeling physical adsorption on porous and nonporous solids using density functional theory , 1995 .

[23]  J. Jagiello.  Stable Numerical Solution of the Adsorption Integral Equation Using Splines , 1994 .

[24]  A. Patrykiejew,et al.  Pore closure effect on adsorption hysteresis in slit-like pores , 1994 .

[25]  K. Gubbins,et al.  Pore size heterogeneity and the carbon slit pore: a density functional theory model , 1993 .

[26]  K. Gubbins,et al.  Pore size distribution analysis of microporous carbons: a density functional theory approach , 1993 .

[27]  Rosenfeld,et al.  Free-energy model for the inhomogeneous hard-sphere fluid mixture and density-functional theory of freezing. , 1989, Physical review letters.

[28]  Marconi,et al.  Microscopic model for hysteresis and phase equilibria of fluids confined between parallel plates. , 1989, Physical review. A, General physics.

[29]  P. Tarazona,et al.  Phase equilibria of fluid interfaces and confined fluids , 1987 .

[30]  P. Tarazona,et al.  Free-energy density functional for hard spheres. , 1985, Physical review. A, General physics.

[31]  P. Tarazona,et al.  Theory of condensation in narrow capillaries , 1984 .

[32]  Charles L. Lawson,et al.  Solving least squares problems , 1976, Classics in applied mathematics.

[33]  R. Franklin.  Crystallite growth in graphitizing and non-graphitizing carbons , 1951, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[34]  T. Steriotis,et al.  Determination of pore size distribution in microporous carbons based on CO2 and H2 sorption data , 2007 .

[35]  J. P. Olivier,et al.  Determination of Pore Size Distribution from Density Functional Theory: A Comparison of Nitrogen and Argon Results , 1994 .

[36]  N. Seaton,et al.  A new analysis method for the determination of the pore size distribution of porous carbons from nitrogen adsorption measurements , 1989 .

[37]  D. H. Everett,et al.  Adsorption in slit-like and cylindrical micropores in the henry's law region. A model for the microporosity of carbons , 1976 .

[38]  W. Steele.  The interaction of gases with solid surfaces , 1974 .