论文信息 - flat-plate systems

flat-plate systems

Output characteristics of tracking type concentrator photovoltaic (CPV) system, multi-crystallin e silicon (mc-Si) PV system, and CIGS PV system were analyzed in the data period of a year from August 2013 to July 2014. In this study, we analyzed the influence of environmental factors using average photon energy (APE) and temperature of solar cell (Teell ). T he characteristics of 14 kW CPV system, 50 kW multi-crystallin e silicon PV system, 60 kW CIGS PV system were evaluated and compared. As a result, the output performance of CPV was highest between the three systems at the most frequent conditions of outdoor environ ment.

[1] Kenji Araki,et al. 30 kW concentrator photovoltaic system using dome-shaped Fresnel lenses. , 2010, Optics express.

[2] K. Emery,et al. Triple-junction solar cell efficiencies above 32%: the promise and challenges of their application in high-conceniration-ratio PV systems , 2000, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036).

[3] Masafumi Yamaguchi,et al. III–V compound multi-junction solar cells: present and future , 2003 .

[4] Takashi Minemoto,et al. Impact of spectral irradiance distribution and temperature on the outdoor performance of amorphous Si photovoltaic modules , 2007 .

[5] H. Takakura,et al. Uniqueness verification of solar spectrum index of average photon energy for evaluating outdoor performance of photovoltaic modules , 2009 .

[6] T. Fuyuki,et al. Annual output estimation of concentrator photovoltaic systems using high-efficiency InGaP/InGaAs/Ge triple-junction solar cells based on experimental solar cell's characteristics and field-test meteorological data , 2006 .

[7] Richard H. Bube,et al. Fundamentals of solar cells , 1983 .