End‐fed modified planar dipole antenna for DTV signal reception

A novel end-fed modified planar dipole antenna for digital television (DTV) signal reception in the 470–806 MHz band is presented. The antenna is of a narrow rectangular shape (10 mm wide and 235 mm long) and is printed on a dielectric substrate. The antenna comprises a step-shaped radiating strip (arm 1) and a narrow rectangular radiating strip (arm 2), both separated by an L-shaped feed gap whose one open end located at the shorter edge or end edge of the antenna. Across this open end of the L-shaped feed gap, the antenna can be excited to provide a wide bandwidth (2.5:1 VSWR) of larger than 50%, which is much wider than that of a corresponding conventional center-fed dipole antenna and allows the proposed antenna easily cover the 470–806 MHz band for DTV signal reception. In addition, over the operating band, the radiation performance of the proposed antenna is similar to that of the conventional center-fed dipole antenna. The proposed end-fed modified planar dipole antenna is studied in detail in this paper. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 676–680, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22229