Mechanics of Solids and Materials

[1]  M. F. Beatty.  Introduction to Nonlinear Elasticity , 1996 .

[2]  J. Rice,et al.  Rate sensitivity of plastic flow and implications for yield-surface vertices , 1983 .

[3]  R. Hill.  The mathematical theory of plasticity , 1950 .

[4]  James R. Rice,et al.  Localized necking in thin sheets , 1975 .

[5]  U. F. Kocks,et al.  Latent hardening in aluminum , 1966 .

[6]  P. D. Kelly.  A reacting continuum , 1964 .

[7]  John W. Hutchinson,et al.  Crack tip fields in strain gradient plasticity , 1996 .

[8]  A. Zaoui,et al.  Multislip tests on copper crystals: A junctions hardening effect , 1982 .

[9]  L. Freund,et al.  Thin Film Materials: Stress, Defect Formation and Surface Evolution , 2004 .

[10]  William D. Nix,et al.  Mechanical properties of thin films , 1989 .

[11]  John W. Hutchinson,et al.  Elastic-plastic behaviour of polycrystalline metals and composites , 1970, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[12]  L. Mirsky,et al.  An introduction to linear algebra , 1957, Mathematical Gazette.

[13]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[14]  J. Weertman,et al.  Microsample tensile testing of nanocrystalline metals , 2000 .

[15]  F H Hsu,et al.  The influences of mechanical loads on the form of a growing elastic body. , 1968, Journal of biomechanics.

[16]  T. Ting.  THE STROH FORMALISM AND CERTAIN INVARIANCES IN TWO-DIMESIONAL ANISOTROPIC ELASTICITY , 1992 .

[17]  W. T. Read,et al.  Multiplication Processes for Slow Moving Dislocations , 1950 .

[18]  N. Petch,et al.  The Cleavage Strength of Polycrystals , 1953 .

[19]  L. Anand,et al.  Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals , 1992, Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences.

[20]  I. Dillamore,et al.  Occurrence of shear bands in heavily rolled cubic metals , 1979 .

[21]  J. Willis,et al.  The energy of an array of dislocations: Implications for strain relaxation in semiconductor heterostructures , 1990 .

[22]  J. Boehler,et al.  Applications of Tensor Functions in Solid Mechanics , 1987 .

[23]  T. C. T. Ting,et al.  Anisotropic Elasticity: Theory and Applications , 1996 .

[24]  L. B. Freund,et al.  Stress intensity factor calculations based on a conservation integral , 1978 .

[25]  John W. Hutchinson,et al.  A class of phenomenological corner theories of plasticity , 1979 .

[26]  Y. Saeki,et al.  Plastic deformation of aluminum bicrystals 〈100〉 oriented , 1978 .

[27]  R. Cahn,et al.  A study of primary and conjugate slip in crystals of alpha-brass , 1955 .

[28]  J. Lothe,et al.  Elastic Strain Fields and Dislocation Mobility , 1992 .

[29]  C. Shih,et al.  Plastic Spin and Related Issues in Phenomenological Plasticity , 1994 .

[30]  W. Drugan,et al.  Theory of plasticity , 1987 .

[31]  Michael Ortiz,et al.  A constitutive theory for the inelastic behavior of concrete , 1985 .

[32]  C. Truesdell,et al.  The Classical Field Theories , 1960 .

[33]  Subra Suresh,et al.  Nano-sized twins induce high rate sensitivity of flow stress in pure copper , 2005 .

[34]  Evan Ma,et al.  Strain hardening, strain rate sensitivity, and ductility of nanostructured metals , 2004 .

[35]  James K. Knowles,et al.  On a class of conservation laws in linearized and finite elastostatics , 1972 .

[36]  L. Taber.  Biomechanics of Growth, Remodeling, and Morphogenesis , 1995 .

[37]  S. D. Smith,et al.  Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel , 1986 .

[38]  Stephen C Cowin,et al.  Tissue growth and remodeling. , 2004, Annual review of biomedical engineering.

[39]  I. N. Sneddon.  The use of integral transforms , 1972 .

[40]  M. Sacks.  Biaxial Mechanical Evaluation of Planar Biological Materials , 2000 .

[41]  Larry A. Taber,et al.  Nonlinear Theory of Elasticity: Applications in Biomechanics , 2004 .

[42]  V. Lubarda.  Dislocation Arrays at the Interface between an Epitaxial Layer and Its Substrate , 1998 .

[43]  F. Dimaggio,et al.  MATERIAL MODEL FOR GRANULAR SOILS , 1971 .

[44]  Y C Fung,et al.  Zero-stress states of arteries. , 1988, Journal of biomechanical engineering.

[45]  Jay D. Humphrey,et al.  Continuum thermomechanics and the clinical treatment of disease and injury , 2003 .

[46]  J. Duffy,et al.  Strain rate history effects and observations of dislocation substructure in aluminum single crystals following dynamic deformation , 1983 .

[47]  R Skalak,et al.  Mechanics and thermodynamics of biomembranes: part 1. , 1979, CRC critical reviews in bioengineering.

[48]  T. Lin.  Slip and stress fields of a polycrystalline aggregate at different stages of loading , 1964 .

[49]  Lallit Anand,et al.  Moderate deformations in extension-torsion of incompressible isotropic elastic materials , 1986 .

[50]  S. Takeuchi,et al.  Temperature and orientation dependence of the yield stress in Ni{in3}Ga single crystals , 1973 .

[51]  P. L. Pratt,et al.  Plastic Deformation and Work-Hardening in NaCl , 1964 .

[52]  J D Humphrey,et al.  Mechanics of the arterial wall: review and directions. , 1995, Critical reviews in biomedical engineering.

[53]  M. Peach,et al.  THE FORCES EXERTED ON DISLOCATIONS AND THE STRESS FIELDS PRODUCED BY THEM , 1950 .

[54]  C. F. Elam.  Tensile Tests on Alloy Crystals. Part IV. A Copper Alloy Containing Five Per Cent. Aluminium , 1927 .

[55]  R. Scattergood,et al.  Ultratough nanocrystalline copper with a narrow grain size distribution , 2004 .

[56]  Wei-shih Yang,et al.  Mesoplasticity and its Applications , 1993 .

[57]  J. D. Eshelby,et al.  Anisotropic elasticity with applications to dislocation theory , 1953 .

[58]  T. Kawabata,et al.  Positive temperature dependence of the yield stress in TiAl L10 type superlattice intermetallic compound single crystals at 293–1273 K , 1985 .

[59]  D. Martin,et al.  The interaction of dislocations and boundaries , 1969 .

[60]  L. A. Galin,et al.  Contact problems of the theory of elasticity in the presence of wear: PMM vol.40, n≗ 6, 1976, pp. 981–986 , 1976 .

[61]  A. Needleman,et al.  Analysis of the cup-cone fracture in a round tensile bar , 1984 .

[62]  R. Asaro,et al.  Overview no. 42 Texture development and strain hardening in rate dependent polycrystals , 1985 .

[63]  John W. Hutchinson,et al.  Bifurcation phenomena in the plane tension test , 1975 .

[64]  N. Mott,et al.  The theory of indentation and hardness tests , 1945 .

[65]  Lei Lu,et al.  Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.

[66]  T. Nieh,et al.  Hall–Petch breakdown manifested in abrasive wear resistance of nanocrystalline nickel , 2002 .

[67]  R. Asaro,et al.  The non-uniform transformation strain problem for an anisotropic ellipsoidal inclusion , 1975 .

[68]  Richard Schapery,et al.  On a Thermodynamic Constitutive Theory and Its Application to Various Nonlinear Materials , 1970 .

[69]  W. Tiller,et al.  Interface morphology development during stress corrosion cracking—II. Via volume diffusion , 1975 .

[70]  J. Barbera,et al.  Contact mechanics , 1999 .

[71]  Said Ahzi,et al.  On the self-consistent modeling of elastic-plastic behavior of polycrystals , 1997 .

[72]  Renato Perucchio,et al.  Modeling Heart Development , 2000 .

[73]  M. Ortiz,et al.  Formulation of implicit finite element methods for multiplicative finite deformation plasticity , 1990 .

[74]  O. Richmond,et al.  Pressure Dependence of Yielding and Associated Volume Expansion in Tempered Martensite. , 1975 .

[75]  Jaroslaw Knap,et al.  Brittle-Ductile Transition in Porous Rocks by Cap Model , 1996 .

[76]  J. Duffy.  Strain Rate History Effects and Dislocation Substructure at High Strain Rates , 1983 .

[77]  S. Cowin,et al.  Bone remodeling I: theory of adaptive elasticity , 1976 .

[78]  H. Hencky,et al.  Zur Theorie plastischer Deformationen und der hierdurch im Material hervorgerufenen Nachspannungen , 1924 .

[79]  S. A. Stigant,et al.  Introduction to Vector and Tensor Analysis , 1954, Nature.

[80]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[81]  Morton E. Gurtin,et al.  On the Nonlinear Theory of Elasticity , 1978 .

[82]  J. D. Eshelby,et al.  The force on an elastic singularity , 1951, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[83]  J. F. Besseling,et al.  Mathematical Modelling of Inelastic Deformation , 1994 .

[84]  Geoffrey Ingram Taylor,et al.  The Plastic Distortion of Metals , 1932 .

[85]  X. Markenscoff,et al.  On conservation integrals in micropolar elasticity , 2003 .

[86]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[87]  J. L. Bassani.  Single Crystal Hardening , 1990 .

[88]  Geoffrey Ingram Taylor,et al.  Bakerian Lecture. The Distortion of an Aluminium Crystal during a Tensile Test , 1923 .

[89]  R. Hill,et al.  XLVI. A theory of the plastic distortion of a polycrystalline aggregate under combined stresses. , 1951 .

[90]  J. Rice,et al.  PARADOXES IN THE APPLICATION OF THERMODYNAMICS TO STRAINED SOLIDS. , 1969 .

[91]  Subra Suresh,et al.  Mechanical behavior of nanocrystalline metals and alloys , 2003 .

[92]  R. Asaro,et al.  Geometrical effects in the inhomogeneous deformation of ductile single crystals , 1979 .

[93]  Yannis F. Dafalias,et al.  Plastic Internal Variables Formalism of Cyclic Plasticity , 1976 .

[94]  J. Rice,et al.  Elementary engineering fracture mechanics , 1974 .

[95]  R. Taggart,et al.  Low amplitude cyclic deformation and crack nucleation in copper and copper-aluminum bicrystals☆ , 1971 .

[96]  K. S. Havner,et al.  A discrete model for the prediction of subsequent yield surfaces in polycrystalline plasticity , 1971 .

[97]  Chandrakant S. Desai,et al.  Constitutive laws for engineering materials, with emphasis on geologic materials , 1984 .

[98]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .

[99]  T. Chung.  Applied Continuum Mechanics , 1996 .

[100]  F. G. Leppington,et al.  The effect of couple stresses on the tip of a crack , 1977 .

[101]  D. Follstaedt,et al.  Hall–Petch relationship in pulsed-laser deposited nickel films , 2004 .

[102]  S. V. Harren,et al.  The finite deformation of rate-dependent polycrystals—I. A self-consistent framework , 1991 .

[103]  R. Asaro,et al.  An experimental study of shear localization in aluminum-copper single crystals , 1981 .

[104]  Anne Hoger,et al.  The stress conjugate to logarithmic strain , 1987 .

[105]  J. Romain,et al.  Foundations of the Non-Linear Mechanics of Continua , 1966 .

[106]  F. Zwicky,et al.  On the Plasticity of Crystals , 1933 .

[107]  G. Taylor.  The Distortion of Crystals of Aluminium under Compression. Part III. Measurements of Stress , 1927 .

[108]  Robert J. Asaro,et al.  Coarse slip bands and the transition to macroscopic shear bands , 1994 .

[109]  C. Lupis.  Chemical thermodynamics of materials , 1983 .

[110]  Wai-Fah Chen,et al.  Plasticity for Structural Engineers , 1988 .

[111]  R. D. Krieg.  A Practical Two Surface Plasticity Theory , 1975 .

[112]  K. Jacobsen,et al.  Softening of nanocrystalline metals at very small grain sizes , 1998, Nature.

[113]  J. D. Eshelby.  The Continuum Theory of Lattice Defects , 1956 .

[114]  A. Papoulis,et al.  The Fourier Integral and Its Applications , 1963 .

[115]  K. S. Havner,et al.  Finite Plastic Deformation of Crystalline Solids , 1992 .

[116]  X. Markenscoff,et al.  Invariance of stresses under a change in elastic compliances , 1993, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[117]  I. V. Aleksandrov,et al.  Influence of strain rate & temperature on the mechanical response of ultrafine-grained Cu, Ni, and Al-4Cu-0.5Zr , 1997 .

[118]  P. Worthington,et al.  The formation of slip bands in polycrystalline 3% silicon iron in the pre-yield microstrain region , 1964 .

[119]  Ray W. Ogden,et al.  Elastic Deformations of Rubberlike Solids , 1982 .

[120]  L. E. Malvern.  Introduction to the mechanics of a continuous medium , 1969 .

[121]  Y. Fung,et al.  Stress, Strain, growth, and remodeling of living organisms , 1995 .

[122]  R. A. Toupin..  Introduction to Mechanics of Continua. By W ILLIAM P RAOER . Boston : Ginn and Go., 1961. 230 pp. $8.00. , 1962 .

[123]  Bernard Budiansky,et al.  A Mathematical Theory of Plasticity Based on the Concept of Slip , 1949 .

[124]  H. Inui,et al.  Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAl , 1992 .

[125]  G. Taylor.  The Distortion of Crystals of Aluminium under Compression. Part II. Distortion by Double Slipping and Changes in Orientation of Crystal Axes during Compression , 1927 .

[126]  E. Gdoutos.  Fracture Mechanics: An Introduction , 1993 .

[127]  Huajian Gao,et al.  SURFACE ROUGHENING OF HETEROEPITAXIAL THIN FILMS , 1999 .

[128]  L. Anand,et al.  A computational procedure for rate-independent crystal plasticity , 1996 .

[129]  R. Asaro,et al.  Shear band formation in plane strain compression , 1988 .

[130]  J. Rice.  Conserved integrals and energetic forces , 1985 .

[131]  L. B. Freund,et al.  Dynamic Fracture Mechanics: Index , 1990 .

[132]  J. Ericksen.  Special Topics in Elastostatics , 1977 .

[133]  G. Grioli.  Elasticità asimmetrica , 1960 .

[134]  J. Rice,et al.  Conservation Laws and Energy-Release Rates , 1973 .

[135]  P. M. Naghdi,et al.  A Dynamical theory of interacting continua , 1965 .

[136]  John R. Rice,et al.  Mathematical analysis in the mechanics of fracture , 1968 .

[137]  P. M. Naghdi,et al.  STRESS-STRAIN RELATIONS IN PLASTICITY AND THERMOPLASTICITY* , 1960 .

[138]  A. Rosen,et al.  On the validity of the hall-petch relationship in nanocrystalline materials , 1989 .

[139]  Robert C. Cammarata,et al.  SURFACE AND INTERFACE STRESS EFFECTS IN THIN FILMS , 1994 .

[140]  N. Fleck,et al.  Strain gradient plasticity , 1997 .

[141]  R. E. Green,et al.  Continuous X-ray diffraction measurement of lattice rotation during tensile deformation of aluminium crystals , 1980 .

[142]  J. W. Matthews,et al.  Defects in epitaxial multilayers: I. Misfit dislocations* , 1974 .

[143]  P. Pimienta,et al.  Mechanical Properties , 2018, Bainite in Steels.

[144]  G. Palumbo,et al.  Deviations from hall-petch behaviour in as-prepared nanocrystalline nickel , 1992 .

[145]  J. D. Eshelby.  Elastic inclusions and inhomogeneities , 1961 .

[146]  Robert J. Asaro,et al.  Computational modeling of microstructures , 1989, Future Gener. Comput. Syst..

[147]  David P. Pope,et al.  A theory of the anomalous yield behavior in L12 ordered alloys , 1984 .

[148]  N. Triantafyllidis.  Bifurcation phenomena in pure bending , 1980 .

[149]  M. Gurtin,et al.  An introduction to continuum mechanics , 1981 .

[150]  J. Hutchinson.  Plastic deformation of b.c.c. polycrystals , 1964 .

[151]  Ronald S. Rivlin,et al.  Some Topics in Finite Elasticity , 1997 .

[152]  M. Musgrave,et al.  Crystal Acoustics: Introduction to the Study of Elastic Waves and Vibrations in Crystals , 1970 .

[153]  L. Freund.  The Stability of a Dislocation Threading a Strained Layer on a Substrate , 1987 .

[154]  C. F. Elam.  The Distortion of β -Brass and Iron Crystals , 1936 .

[155]  R. Hill,et al.  CXXVIII. A theoretical derivation of the plastic properties of a polycrystalline face-centred metal , 1951 .

[156]  J. Rice,et al.  CONDITIONS FOR THE LOCALIZATION OF DEFORMATION IN PRESSURE-SENSITIVE DILATANT MATERIALS , 1975 .

[157]  D. Hull,et al.  Introduction to Dislocations , 1968 .

[158]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[159]  C. Truesdell,et al.  The Non-Linear Field Theories Of Mechanics , 1992 .

[160]  Y C Fung,et al.  Relationship between hypertension, hypertrophy, and opening angle of zero-stress state of arteries following aortic constriction. , 1989, Journal of biomechanical engineering.

[161]  Viggo Tvergaard,et al.  Cavitation instabilities in elastic-plastic solids , 1991 .

[162]  U. F. Kocks.  The relation between polycrystal deformation and single-crystal deformation , 1970 .

[163]  A. Jamiołkowski.  Book reviewApplications of Lie groups to differential equations : Peter J. Olver (School of Mathematics, University of Minnesota, Minneapolis, U.S.A): Graduate Texts in Mathematics, Springer-Verlag, New York, Berlin, Heidelberg, Tokyo, 1986, XXVI+497pp. , 1989 .

[164]  R. Ogden,et al.  A New Constitutive Framework for Arterial Wall Mechanics and a Comparative Study of Material Models , 2000 .

[165]  V. Tvergaard.  On localization in ductile materials containing spherical voids , 1982, International Journal of Fracture.

[166]  D'arcy W. Thompson,et al.  On Growth and Form , 1917, Nature.

[167]  S. Ahzi,et al.  A self consistent approach of the large deformation polycrystal viscoplasticity , 1987 .

[168]  V. Lubarda.  Circular inclusions in anti-plane strain couple stress elasticity , 2003 .

[169]  R. Valiev,et al.  Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation , 2002 .

[170]  John W. Hutchinson,et al.  Influence of yield surface curvature on flow localization in dilatant plasticity , 1985 .

[171]  R. Hill.  On constitutive macro-variables for heterogeneous solids at finite strain , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[172]  Richard W. Hanks.  Nonlinear continuum mechanics: An introduction to the continuum physics and mathematical theory of the nonlinear mechanical behavior of materials, D. C. Leigh, McGraw Hill, New York (1968) , 1969 .

[173]  S. Suresh,et al.  Model experiments for direct visualization of grain boundary deformation in nanocrystalline metals , 2003 .

[174]  René de Borst,et al.  Material Instabilities in Solids , 1998 .

[175]  E Otten,et al.  Analytical description of growth. , 1982, Journal of theoretical biology.

[176]  Subra Suresh,et al.  Spherical indentation of compositionally graded materials: Theory and experiments , 1997 .

[177]  Stephen C. Cowin.  Structural Adaptation of Bones , 1990 .

[178]  Alan Needleman,et al.  Dynamic Shear Band Development in Plane Strain , 1989 .

[179]  M. Lighthill.  Introduction to Fourier Analysis and Generalised Functions: Introduction , 1958 .

[180]  Piotr Perzyna,et al.  On combined isotropic and kinematic hardening effects in plastic flow processes , 1991 .

[181]  C. C. Wang,et al.  Introduction to Rational Elasticity , 1973 .

[182]  K. Schwalbe,et al.  The Crack Tip Opening Displacement and J Integral Under Strain Control and Fully Plastic Conditions Estimated by the Engineering Treatment Model for Plane Stress Tension , 1994 .

[183]  Some calculations of the energy-release rate G for cracks in micropolar and couple-stress elastic media , 1974 .

[184]  Buddy D. Ratner,et al.  Biomaterials Science: An Introduction to Materials in Medicine , 1996 .

[185]  J. Kestin.  A Course In Thermodynamics , 1979 .

[186]  Paul G. Sanders,et al.  Elastic and tensile behavior of nanocrystalline copper and palladium , 1997 .

[187]  R. Hill.  A general theory of uniqueness and stability in elastic-plastic solids , 1958 .

[188]  J. Willis,et al.  The energy of an array of dislocations. II, Consideration of a capped epitaxial layer , 1991 .

[189]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[190]  Vlado A. Lubarda,et al.  On the mechanics of solids with a growing mass , 2002 .

[191]  Irving H. Shames.  Elastic and inelastic stress analysis , 1991 .

[192]  P. Chadwick.  Continuum Mechanics: Concise Theory and Problems , 1976 .

[193]  On the bifurcation and postbifurcation analysis of elastic-plastic solids under general prebifurcation conditions , 1983 .

[194]  Peter Haupt,et al.  Continuum Mechanics and Theory of Materials , 1999 .

[195]  K. N. Sawyers,et al.  The Strain-Energy Function for Elastomers , 1976 .

[196]  Alan Needleman,et al.  Non-normality and bifurcation in plane strain tension and compression , 1979 .

[197]  R. J.,et al.  I Strain Localization in Ductile Single Crystals , 1977 .

[198]  R. D. Mindlin.  Micro-structure in linear elasticity , 1964 .

[199]  K. Hayashi.  Cardiovascular solid mechanics. Cells, tissues, and organs , 2003 .

[200]  D. C. Drucker,et al.  A DEFINITION OF STABLE INELASTIC MATERIAL , 1957 .

[201]  A. Fischer-Cripps,et al.  Introduction to Contact Mechanics , 2000 .

[202]  R. Stojanović.  Recent Developments in the Theory of Polar Continua , 1970 .

[203]  William L. Ko,et al.  Application of Finite Elastic Theory to the Deformation of Rubbery Materials , 1962 .

[204]  H. Gleiter.  Nanocrystalline Materials and Nanometer-Sized Glasses , 1989 .

[205]  L A Taber,et al.  Theoretical study of stress-modulated growth in the aorta. , 1996, Journal of theoretical biology.

[206]  Yinmin M Wang,et al.  Temperature and strain rate effects on the strength and ductility of nanostructured copper , 2003 .

[207]  R. Toupin.  Elastic materials with couple-stresses , 1962 .

[208]  L. Treloar.  The Physics of Rubber Elasticity (J. Meixner) , 1959 .

[209]  T. Mitchell,et al.  The detection of secondary slip during the deformation of copper and α-brass single crystals , 1964 .

[210]  Rodney Hill,et al.  Elastic potentials and the structure of inelastic constitutive laws , 1973 .

[211]  A. Kelly,et al.  Deformation of age-hardened aluminium alloy crystals—II. Fracture , 1964 .

[212]  R. Bullough,et al.  Stable configurations in strained epitaxial layers , 1992 .

[213]  R. Ogden.  Non-Linear Elastic Deformations , 1984 .

[214]  R. Asaro,et al.  The fracture mechanics of slit-like cracks in anisotropic elastic media , 1972 .

[215]  D. M. Tracey,et al.  On the ductile enlargement of voids in triaxial stress fields , 1969 .

[216]  Alan Needleman,et al.  An analysis of nonuniform and localized deformation in ductile single crystals , 1982 .

[217]  Alfredo Caro,et al.  Grain boundary structure and its influence on plastic deformation of polycrystalline FCC metals at the nanoscale : A molecular dynamics study , 2001 .

[218]  H. V. Swygenhoven,et al.  Plastic Deformation in Metals with Nanosized Grains: Atomistic Simulations and Experiments , 2004 .

[219]  S. Nemat-Nasser.  On Finite Plastic Flow of Crystalline Solids and Geomaterials , 1983 .

[220]  Gérard A. Maugin,et al.  Configurational mechanics of materials , 2001 .

[221]  S. Nemat-Nasser.  Plasticity: A Treatise on Finite Deformation of Heterogeneous Inelastic Materials , 2004 .

[222]  A. Needleman.  Void Growth in an Elastic-Plastic Medium , 1972 .

[223]  John L. Bassani,et al.  Plastic flow of crystals , 1993 .

[224]  A. Timpe.  Probleme der Spannungsverteilung in ebenen Systemen : einfach gelöst mit Hilfe der airyschen Funktion , 1905 .

[225]  I. Doghri.  Mechanics of Deformable Solids , 2000 .

[226]  W. Sharpe,et al.  The effect of biaxial loading on the critical resolved shear stress of zinc single crystals , 1973 .

[227]  R. Birringer,et al.  The study of grain size dependence of yield stress of copper for a wide grain size range , 1994 .

[228]  U. F. Kocks,et al.  Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties , 1998 .

[229]  A. L. Florence,et al.  The Linear Theory of Thermoelasticity , 1972 .

[230]  M. J. Sewell.  Maximum and minimum principles: References , 1987 .

[231]  K. S. Havner,et al.  Perspectives in the mechanics of elastoplastic crystals , 1982 .

[232]  S. Cowin,et al.  Biomechanics: Mechanical Properties of Living Tissues, 2nd ed. , 1994 .

[233]  John Dundurs,et al.  Interaction between an edge dislocation and a circular inclusion , 1964 .

[234]  A. G. McLellan.  The Classical Thermodynamics of Deformable Materials. , 1981, Journal of Fluid Mechanics.

[235]  R. Hill.  Acceleration waves in solids , 1962 .

[236]  C. Kittel.  Introduction to solid state physics , 1954 .

[237]  Allan Pinkus,et al.  Fourier Series and Integral Transforms: Fourier Series , 1997 .

[238]  R. Dubey,et al.  Application of Objective Rates in Mechanical Modeling of Solids , 1996 .

[239]  P. Jackson,et al.  The Instability of the Work Hardened State. II. Slip in “Alien” Dislocation Distributions , 1965 .

[240]  M. Dao,et al.  Non-Schmid effects and localized plastic flow in intermetallic alloys , 1993 .

[241]  Jagdish Narayan,et al.  On the grain size softening in nanocrystalline materials , 2000 .

[242]  F. Nabarro,et al.  Dislocations in solids , 1979 .

[243]  S. Nemat-Nasser,et al.  Micromechanics: Overall Properties of Heterogeneous Materials , 1993 .

[244]  G. Maugin.  The Thermomechanics of Plasticity and Fracture , 1992 .

[245]  Subra Suresh,et al.  Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel , 2003 .

[246]  K. Lu,et al.  An abnormal strain rate effect on tensile behavior in nanocrystalline copper , 2001 .

[247]  En-Jui Lee.  Elastic-Plastic Deformation at Finite Strains , 1969 .

[248]  J. Rice.  Localization of plastic deformation , 1976 .

[249]  Y. Minonishi.  Plastic deformation of single crystals of Ti3Al with D019 structure , 1991 .

[250]  G. Taylor,et al.  The Plastic Extension and Fracture of Aluminium Crystals , 1925 .

[251]  The Sternberg-Koiter Conclusion and Other Anomalies of the Concentrated Couple , 1989 .

[252]  A. Molinari.  Self-Consistent Modelling of Plastic and Viscoplastic Polycrystalline Materials , 1997 .

[253]  P. M. Naghdi,et al.  A correct definition of elastic and plastic deformation and its computational significance , 1981 .

[254]  C. Gans,et al.  Biomechanics: Motion, Flow, Stress, and Growth , 1990 .

[255]  H. Conrad.  Grain size dependence of the plastic deformation kinetics in Cu , 2003 .

[256]  Anthony Kelly,et al.  Crystallography and crystal defects , 1970 .

[257]  G. Taylor.  The Mechanism of Plastic Deformation of Crystals. Part I. Theoretical , 1934 .

[258]  Ernst Melan,et al.  Zur Plastizität des räumlichen Kontinuums , 1938 .

[259]  Egor P. Popov,et al.  A model of nonlinearly hardening materials for complex loading , 1975 .

[260]  Ashim K. Datta,et al.  Biological and Bioenvironmental Heat and Mass Transfer , 2002 .

[261]  W. Nowacki.  The Micropolar Thermoelasticity , 1974 .

[262]  L. Brillouin,et al.  Tensors in Mechanics and Elasticity , 1965 .

[263]  A. N. Stroh.  Dislocations and Cracks in Anisotropic Elasticity , 1958 .

[264]  G. Ogilvie,et al.  The plastic deformation of a crystal in a polycrystalline aggregate , 1954 .

[265]  S. Antman.  Nonlinear problems of elasticity , 1994 .

[266]  K. Morii,et al.  Shear Bands in Rolled Copper Single Crystals , 1981 .

[267]  E. Gdoutos.  Fracture Mechanics Criteria and Applications , 1990 .

[268]  S. Suresh,et al.  Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins , 2005 .

[269]  C. F. Elam.  Tensile Tests on Alloy Crystals. Part II. Solid Solution Alloys of Copper and Zinc , 1927 .

[270]  Millard F. Beatty,et al.  Topics in Finite Elasticity: Hyperelasticity of Rubber, Elastomers, and Biological Tissues—With Examples , 1987 .

[271]  R. Honeycombe,et al.  The deformation and fracture of aluminium-5.5% copper crystals , 1962 .

[272]  Gérard A. Maugin,et al.  Material Inhomogeneities in Elasticity , 2020 .

[273]  F. Thümmler.  Reine und angewandte metallkunde in einzeldarstellungen band 26 Gase und Kohlenstoff in Metallen: Herausgeber: E. Fromm und E. Gebhardt, Max-Planck-Institut für Metallforschung, Stuttgart (Springer-Verlag, Berlin-Heidelberg-New York, 510 abb., XVIII, 747 Seiten, 1976, Gebunden DM 296,-; US $121.40) , 1977 .

[274]  Cristian Teodosiu,et al.  Elastic Models of Crystal Defects , 1982 .

[275]  M. Polanyi,et al.  Über eine Art Gitterstörung, die einen Kristall plastisch machen könnte , 1934 .

[276]  Wolfgang Muschik,et al.  Thermodynamics with Internal Variables. Part II. Applications , 1994 .

[277]  R. Landel,et al.  The Strain‐Energy Function of a Hyperelastic Material in Terms of the Extension Ratios , 1967 .

[278]  J. D. Eshelby.  The elastic energy-momentum tensor , 1975 .

[279]  E. Dill,et al.  Theory of Elasticity of an Anisotropic Elastic Body , 1964 .

[280]  G. Gladwell.  Contact Problems in the Classical Theory of Elasticity , 1980 .

[281]  A. W. Hull.  The Positions of Atoms in Metals , 1919, Transactions of the American Institute of Electrical Engineers.

[282]  W. Prager,et al.  A NEW METHOD OF ANALYZING STRESSES AND STRAINS IN WORK - HARDENING PLASTIC SOLIDS , 1956 .

[283]  V. Lubarda.  The effects of couple stresses on dislocation strain energy , 2003 .

[284]  Y. F. Dafalias,et al.  Corotational Rates for Kinematic Hardening at Large Plastic Deformations , 1983 .

[285]  John W. Hutchinson,et al.  Void Growth in Plastic Solids , 1992 .

[286]  J. Hutchinson.  Plastic stress-strain relations of F.C.C polycrystalline metals hardening according to Taylor's rule , 1964 .

[287]  Zenon Mróz,et al.  On the description of anisotropic workhardening , 1967 .

[288]  R. Swalin,et al.  Thermodynamics of Solids , 1963 .

[289]  J. Hutchinson,et al.  Bounds and self-consistent estimates for creep of polycrystalline materials , 1976, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[290]  M. A. Jaswon.  Large Elastic Deformations , 1962, Nature.

[291]  W. T. Koiter.  Couple-stresses in the theory of elasticity , 1963 .

[292]  R. Hill.  A theory of the yielding and plastic flow of anisotropic metals , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[293]  John W. Hutchinson,et al.  Void Growth and Collapse in Viscous Solids , 1982 .

[294]  Zhigang Suo,et al.  Motions of Microscopic Surfaces in Materials , 1997 .

[295]  J. Koehler.  The Nature of Work-Hardening , 1952 .

[296]  J. Rice.  On the Structure of Stress-Strain Relations for Time-Dependent Plastic Deformation in Metals , 1970 .

[297]  M. Kanninen,et al.  Advanced Fracture Mechanics , 1986 .

[298]  R. Asaro,et al.  Micromechanics of Crystals and Polycrystals , 1983 .

[299]  Eugene A. Fitzgerald,et al.  Dislocations in strained-layer epitaxy : theory, experiment, and applications , 1991 .

[300]  Rodney Hill,et al.  Aspects of Invariance in Solid Mechanics , 1979 .

[301]  A. McCulloch,et al.  Stress-dependent finite growth in soft elastic tissues. , 1994, Journal of biomechanics.

[302]  John Brand Martin,et al.  Plasticity: Fundamentals and General Results , 1975 .

[303]  A. Needleman,et al.  Analysis of large-strain shear in rate-dependent face-centred cubic polycrystals: correlation of micro- and macromechanics , 1989, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[304]  A. Ugural.  Stresses in plates and shells , 1981 .

[305]  W. Lomer.  A dislocation reaction in the face-centred cubic lattice , 1951 .

[306]  R. Asaro,et al.  Planar dislocation interactions in anisotropic media with applications to nodes , 1973 .

[307]  A. Cottrell,et al.  Dislocations and plastic flow in crystals , 1953 .

[308]  M. Victoria,et al.  Nanocrystalline electrodeposited Ni: microstructure and tensile properties , 2002 .

[309]  Alan Needleman,et al.  Material rate dependence and localized deformation in crystalline solids , 1983 .

[310]  H. W. Weizsäcker,et al.  Biomechanical behavior of the arterial wall and its numerical characterization , 1998, Comput. Biol. Medicine.

[311]  H. F. Tiersten,et al.  Effects of couple-stresses in linear elasticity , 1962 .

[312]  Robert T. DeHoff,et al.  Thermodynamics in Materials Science , 1993 .

[313]  Roger Temam,et al.  Mathematical Problems in Plasticity , 1985 .

[314]  H. V. Swygenhoven,et al.  Atomic mechanism for dislocation emission from nanosized grain boundaries , 2002 .

[315]  Robert J. Asaro,et al.  Elastic-plastic crystal mechanics for low symmetry crystals , 1995 .

[316]  S. V. Harren,et al.  Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model , 1989 .

[317]  I. Jasiuk,et al.  Planar Cosserat Elasticity of Materials With Holes and Intrusions , 1995 .

[318]  Qi-Chang He,et al.  A more fundamental approach to damaged elastic stress-strain relations , 1995 .

[319]  J. D. Eshelby.  Energy Relations and the Energy-Momentum Tensor in Continuum Mechanics , 1999 .

[320]  V. Lubarda.  Energy analysis of dislocation arrays near bimaterial interfaces , 1997 .

[321]  M. Baskes,et al.  The influence of grain size on the work hardening of face-center cubic polycrystals , 1973 .

[322]  S. C. Hunter,et al.  Mechanics of Continuous Media , 1977 .

[323]  W. R. Hibbard,et al.  Tensile deformation of high-purity copper as a function of temperature, strain rate, and grain size , 1953 .

[324]  A. Kelly,et al.  Strengthening methods in crystals , 1971 .

[325]  Sia Nemat-Nasser,et al.  On finite plastic flows of compressible materials with internal friction , 1980 .

[326]  P. Krysl,et al.  Deformation mechanism transitions in nanoscale fcc metals , 2003 .

[327]  M. Dao,et al.  Localized deformation modes and non-Schmid effects in crystalline solids. Part I. Critical conditions of localization , 1996 .

[328]  W. Hosford,et al.  Ductile fracture in copper single crystals , 1965 .

[329]  J. Rice,et al.  Constitutive analysis of elastic-plastic crystals at arbitrary strain , 1972 .

[330]  J. L. Sanders.  PLASTIC STRESS-STRAIN RELATIONS BASED ON INFINITELY MANY PLANE LOADING SURFACES , 1954 .

[331]  C. F. Elam.  Tensile Tests of Large Gold, Silver and Copper Crystals , 1926 .

[332]  J. H. Merwe.  Strain relaxation in epitaxial overlayers , 1991 .

[333]  V. Lubarda.  Constitutive theories based on the multiplicative decomposition of deformation gradient: Thermoelasticity, elastoplasticity, and biomechanics , 2004 .

[334]  A. Madan,et al.  Effect of process variables on the structure, residual stress, and hardness of sputtered nanocrystalline nickel films , 2001 .

[335]  P. Franciosi,et al.  Latent hardening in copper and aluminium single crystals , 1980 .

[336]  A. Kelly,et al.  Deformation of age-hardened aluminium alloy crystals—I plastic flow , 1964 .

[337]  L. Freund.  The Mechanics of Dislocations in Strained-Layer Semiconductor Materials , 1993 .

[338]  K. Denbigh,et al.  The Principles of Chemical Equilibrium , 1956 .

[339]  U. F. Kocks.  Constitutive Behavior Based on Crystal Plasticity , 1987 .

[340]  R. Asaro,et al.  A Further Synthesis of Sextic and Integral Theories for Dislocations and Line Forces in Anisotropic Media , 1973, November 1.

[341]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[342]  P. Jackson,et al.  Latent Hardening and the Flow Stress in Copper Single Crystals , 1967 .

[343]  J. Willis,et al.  A new study of critical layer thickness, stability and strain relaxation in pseudomorphic gexsi1-x strained epilayers , 1992 .

[344]  I. N. Sneddon,et al.  Finite Deformation of an Elastic Solid , 1954 .

[345]  A.J.M. Spencer,et al.  Theory of invariants , 1971 .

[346]  Rodney Hill,et al.  The essential structure of constitutive laws for metal composites and polycrystals , 1967 .

[347]  U. F. Kocks,et al.  A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable , 1988 .

[348]  L. Freund.  The driving force for glide of a threading dislocation in a strained epitaxial layer on a substrate , 1990 .

[349]  A. Cemal Eringen,et al.  NONLINEAR THEORY OF SIMPLE MICRO-ELASTIC SOLIDS-I , 1964 .

[350]  R. Hill.  Invariance relations in thermoelasticity with generalized variables , 1981, Mathematical Proceedings of the Cambridge Philosophical Society.

[351]  K. T. Ramesh,et al.  Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals , 2004 .

[352]  D. W. Readey,et al.  Plastic deformation of single crystal ice , 1964 .

[353]  Yinmin M Wang,et al.  Enhanced tensile ductility and toughness in nanostructured Cu , 2002 .

[354]  G. R. Bourne,et al.  Mechanical properties of nanocrystalline nickel produced by electrodeposition , 1999 .

[355]  William Prager,et al.  The Theory of Plasticity: A Survey of Recent Achievements , 1955 .

[356]  S. Phillpot,et al.  Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation , 2002 .

[357]  J. Rice.  Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity , 1971 .