Uniaxial time-dependent ratchetting: Visco-plastic model and finite element application

Abstract Based on a visco-plastic model, a time-dependent formulation was introduced. The model can describe as time-dependent ratchetting in term of revising the Abdel-Karim–Ohno nonlinear kinematic hardening rule [M. Abdel-Karim, N. Ohno, Kinematic hardening model suitable for ratchetting with steady-state, Int. J. Plast. 16 (2000) 225–240] by a static recovery term. It is shown that the simulated results are in good agreement with the corresponding experiment results of SS304 stainless steel [G.Z. Kang, Q.H. Kan, J. Zhang, Time-dependent ratchetting experiments of SS304 stainless steel, Int. J. Plast. 22 (2006) 858–894]. Then, the proposed model with static recovery term was implemented into the finite element package. Based on the radial return method and backward Euler’s integration, a new implicit stress integration algorithm was proposed, and a new expression of consistent tangent modulus was derived. Finally, the reasonability of such implementation was verified by some numerical samples.

[1]  Stefan Hartmann,et al.  Stress computation and consistent tangent operator using non-linear kinematic hardening models , 1993 .

[2]  G. Kang,et al.  Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures , 2002 .

[3]  G. Kang,et al.  UNIAXIAL AND NON-PROPORTIONALLY MULTIAXIAL RATCHETING OF SS304 STAINLESS STEEL AT ROOM TEMPERATURE: EXPERIMENTS AND SIMULATIONS , 2004 .

[4]  G. Kang,et al.  Time-dependent ratchetting experiments of SS304 stainless steel , 2006 .

[5]  Yukio Takahashi,et al.  Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr–1Mo steel , 2005 .

[6]  Yukio Takahashi,et al.  Ratchetting of viscoplastic material with cyclic softening, part 2: application of constitutive models , 2005 .

[7]  F. Yoshida.  Uniaxial and biaxial creep-ratcheting behavior of SUS304 stainless steel at room temperature , 1990 .

[8]  S. Hartmann,et al.  AN EFFICIENT STRESS ALGORITHM WITH APPLICATIONS IN VISCOPLASTICITY AND PLASTICITY , 1997 .

[9]  N. Ohno,et al.  Kinematic hardening model suitable for ratchetting with steady-state , 2000 .

[10]  N. Ohno,et al.  Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior , 1993 .

[11]  Georges Cailletaud,et al.  Integration methods for complex plastic constitutive equations , 1996 .

[12]  Guozheng Kang,et al.  A visco–plastic constitutive model incorporated with cyclic hardening for uniaxial/multiaxial ratcheting of SS304 stainless steel at room temperature , 2002 .

[13]  Jean-Louis Chaboche,et al.  On some modifications of kinematic hardening to improve the description of ratchetting effects , 1991 .

[14]  Xu Chen,et al.  Modified kinematic hardening rule for multiaxial ratcheting prediction , 2004 .

[15]  J. Chaboche,et al.  Modeling of ratchetting: evaluation of various approaches , 1994 .

[16]  X. Feaugas,et al.  Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation , 2004 .

[17]  Stelios Kyriakides,et al.  Ratcheting of cyclically hardening and softening materials: II. Multiaxial behavior , 1994 .

[18]  Jean-Louis Chaboche,et al.  Cyclic Viscoplastic Constitutive Equations, Part I: A Thermodynamically Consistent Formulation , 1993 .

[19]  Sia Nemat-Nasser,et al.  A universal integration algorithm for rate-dependent elastoplasticity , 1996 .

[20]  Tasnim Hassan,et al.  Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation , 2001 .

[21]  Huseyin Sehitoglu,et al.  Modeling of cyclic ratchetting plasticity, part i: Development of constitutive relations , 1996 .

[22]  Tasnim Hassan,et al.  Anatomy of coupled constitutive models for ratcheting simulation , 2000 .

[23]  R. D. Krieg,et al.  Accuracies of Numerical Solution Methods for the Elastic-Perfectly Plastic Model , 1977 .

[24]  David L. McDowell,et al.  Stress state dependence of cyclic ratchetting behavior of two rail steels , 1995 .

[25]  Guozheng Kang,et al.  Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures , 2002 .

[26]  G. Kang,et al.  Experimental study on uniaxial and multiaxial strain cyclic characteristics and ratcheting of 316L stainless steel , 2009 .

[27]  David J. Benson,et al.  On the numerical algorithm for isotropic–kinematic hardening with the Armstrong–Frederick evolution of the back stress , 2002 .

[28]  Nobutada Ohno,et al.  Implementation of cyclic plasticity models based on a general form of kinematic hardening , 2002 .

[29]  Huseyin Sehitoglu,et al.  Cyclic ratchetting of 1070 steel under multiaxial stress states , 1994 .

[30]  P. Robinet,et al.  Experimental study and phenomenological modelization of ratchet under uniaxial and biaxial loading on an austenitic stainless steel , 1995 .

[31]  Guozheng Kang,et al.  Constitutive modeling of strain range dependent cyclic hardening , 2003 .

[32]  G. Kang,et al.  Uniaxial ratcheting and failure behaviors of two steels , 2005 .

[33]  Guozheng Kang,et al.  Finite element implementation of visco‐plastic constitutive model with strain‐range‐dependent cyclic hardening , 2005 .

[34]  Xu Chen,et al.  On the Ohno–Wang kinematic hardening rules for multiaxial ratcheting modeling of medium carbon steel , 2005 .

[35]  Guozheng Kang,et al.  A visco-plastic constitutive model for ratcheting of cyclically stable materials and its finite element implementation , 2004 .

[36]  Guozheng Kang,et al.  Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations , 2002 .

[37]  N. Ohno,et al.  Uniaxial Ratchetting of 316FR Steel at Room Temperature— Part II: Constitutive Modeling and Simulation , 2000 .