GENERALIZED TOOL PATH GENERATION ALGORITHM FOR SCULPTURED PSEUDO SYMMETRIC SURFACE MACHINING

iii

[1]  Prasenjit Kayal,et al.  Inverse Offset Method for Adaptive Cutter Path Generation from Point-based Surface , 2009 .

[2]  Kai Tang,et al.  Offsetting surface boundaries and 3-axis gouge-free surface machining , 1995, Comput. Aided Des..

[3]  Takafumi Saito,et al.  NC machining with G-buffer method , 1991, SIGGRAPH.

[4]  G. W. Vickers,et al.  The definition and manufacture of compound curvature surfaces using G-surf , 1985 .

[5]  Jean-Pierre Kruth,et al.  Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces , 1994 .

[6]  M. Liang,et al.  A STEP based tool path generation system for rough machining of planar surfaces , 1996 .

[7]  Robert B. Jerard,et al.  Sculptured Surface Machining , 1998 .

[8]  Bahram Ravani,et al.  Offset Surface Generation and Contouring in Computer-Aided Design , 1987 .

[9]  Byoung Kyu Choi,et al.  Compound surface modelling and machining , 1988 .

[10]  Sanjeev Bedi,et al.  Surface swept by a toroidal cutter during 5-axis machining , 2001, Comput. Aided Des..

[11]  Robert B. Jerard,et al.  C-space approach to tool-path generation for die and mould machining , 1997, Comput. Aided Des..

[12]  Sanjeev Bedi,et al.  Implementation of the principal-axis method for machining of complex surfaces , 1996 .

[13]  Hong-Tzong Yau,et al.  A Reverse Engineering Approach to Generating Interference-Free Tool Paths in Three-Axis Machining from Scanned Data of Physical Models , 2002 .

[14]  James H. Oliver,et al.  Non-constant parameter NC tool path generation on sculptured surfaces , 1994 .

[15]  Sanjeev Bedi,et al.  Single controlled axis lathe mill , 2007 .

[16]  Sanjeev Bedi,et al.  Principal curvature alignment technique for machining complex surfaces , 1997 .

[17]  Paul F. Jacobs,et al.  Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .

[18]  Abbas Vafaeesefat,et al.  Penetration–elimination method for five-axis CNC machining of sculptured surfaces , 2007 .

[19]  James E. Bobrow,et al.  NC machine tool path generation from CSG part representations , 1985 .

[20]  H.-T. Yau,et al.  Numerical control machining of triangulated sculptured surfaces in a stereo lithography format with a generalized cutter , 2004 .

[21]  Taylan Altan,et al.  Advanced Techniques for Die and Mold Manufacturing , 1993 .

[22]  Sanjeev Bedi,et al.  Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces , 2000, Comput. Aided Geom. Des..

[23]  Paul J. Gray,et al.  Arc-intersect method for 5-axis tool positioning , 2005, Comput. Aided Des..

[24]  G. W. Vickers,et al.  Ball-Mills Versus End-Mills for Curved Surface Machining , 1989 .

[25]  Alan C. Lin,et al.  Automatic generation of NC cutter path from massive data points , 1998, Comput. Aided Des..

[26]  P. Broomhead,et al.  Generating NC data at the machine tool for the manufacture of free-form surfaces , 1986 .

[27]  Stephen Mann,et al.  A classified bibliography of literature on NC milling path generation , 1997, Comput. Aided Des..