Continuum and atomistic models of strongly coupled diffusion, stress, and solute concentration

[1]  Venkat Srinivasan,et al.  In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation , 2010, 1108.0647.

[2]  Yue Qi,et al.  Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: A first-principles study , 2010 .

[3]  Tanmay K. Bhandakkar,et al.  Cohesive modeling of crack nucleation under diffusion induced stresses in a thin strip: Implications on the critical size for flaw tolerant battery electrodes , 2010 .

[4]  M. Verbrugge,et al.  Diffusion-Induced Stress, Interfacial Charge Transfer, and Criteria for Avoiding Crack Initiation of Electrode Particles , 2010 .

[5]  Jake Christensen,et al.  Modeling Diffusion-Induced Stress in Li-Ion Cells with Porous Electrodes , 2010 .

[6]  L. Hector,et al.  Three-Fold Increase in the Modulus of Graphite Negative Electrodes during Lithium Intercalation , 2010 .

[7]  Renaud A. L. Vallée,et al.  In situ tuning the optical properties of a cavity by wrinkling , 2010 .

[8]  Mark W. Verbrugge,et al.  Stress and Strain-Energy Distributions within Diffusion-Controlled Insertion-Electrode Particles Subjected to Periodic Potential Excitations , 2009 .

[9]  J. Svoboda,et al.  Vacancy-driven stress relaxation in layers , 2009 .

[10]  Mark W. Verbrugge,et al.  Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation , 2009 .

[11]  M. Verbrugge,et al.  The influence of surface mechanics on diffusion induced stresses within spherical nanoparticles , 2008 .

[12]  M. Verbrugge,et al.  Stress Distribution within Spherical Particles Undergoing Electrochemical Insertion and Extraction , 2008 .

[13]  Wei Shyy,et al.  Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles , 2008 .

[14]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[15]  Chien H. Wu.  Stress-driven diffusion in a deforming and evolving elastic circular tube of single component solid with vacancies , 2007 .

[16]  W. Shyy,et al.  Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles , 2007 .

[17]  H. Mehrer.  Diffusion in solids : fundamentals, methods, materials, diffusion-controlled processes , 2007 .

[18]  Chunsheng Wang,et al.  Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells , 2007 .

[19]  L. Hector,et al.  Molecular dynamics study of solute strengthening in Al/Mg alloys , 2006 .

[20]  J. Newman,et al.  A mathematical model of stress generation and fracture in lithium manganese oxide , 2006 .

[21]  Jong-Wan Park,et al.  Electrochemical Characteristics of Si/Mo Multilayer Anode for Lithium-Ion Batteries , 2006 .

[22]  John Newman,et al.  Stress generation and fracture in lithium insertion materials , 2005 .

[23]  Fuqian Yang.  Interaction between diffusion and chemical stresses , 2005 .

[24]  M. Yoshio,et al.  Electrochemical behaviors of silicon based anode material , 2005 .

[25]  S. Koter,et al.  Two-dimensional gas and vacancy solution approaches in the thermodynamic description of adsorption equilibrium. , 2005, Journal of colloid and interface science.

[26]  R. E. Phillips,et al.  ERRATUM: Modelling diffusion in crystals under high internal stress gradients , 2005 .

[27]  Yung-Eun Sung,et al.  Failure Modes of Silicon Powder Negative Electrode in Lithium Secondary Batteries , 2004 .

[28]  R. C. Picu,et al.  Atomistic study of pipe diffusion in Al–Mg alloys , 2004 .

[29]  S. Bhatia,et al.  Kinetics of adsorption on activated carbon: application of heterogeneous vacancy solution theory , 2002 .

[30]  Sanboh Lee,et al.  Effect of chemical stress on diffusion in a hollow cylinder , 2002 .

[31]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[32]  S. Bhatia,et al.  Application of heterogeneous vacancy solution theory to characterization of microporous solids , 2001 .

[33]  H. Lee,et al.  Stress effect on cycle properties of the silicon thin-film anode , 2001 .

[34]  G. Henkelman,et al.  Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points , 2000 .

[35]  G. Henkelman,et al.  A climbing image nudged elastic band method for finding saddle points and minimum energy paths , 2000 .

[36]  Martin Winter,et al.  Electrochemical lithiation of tin and tin-based intermetallics and composites , 1999 .

[37]  T. Brousse,et al.  Amorphous silicon as a possible anode material for Li-ion batteries , 1999 .

[38]  L. Gray,et al.  Kinetically Driven Growth Instability in Stressed Solids , 1998 .

[39]  Petr Novák,et al.  Insertion Electrode Materials for Rechargeable Lithium Batteries , 1998 .

[40]  M. Tuckerman,et al.  IN CLASSICAL AND QUANTUM DYNAMICS IN CONDENSED PHASE SIMULATIONS , 1998 .

[41]  Robert M. Darling,et al.  Modeling a Porous Intercalation Electrode with Two Characteristic Particle Sizes , 1997 .

[42]  Neville Reid Moody,et al.  COMMENT: Trapping of hydrogen to lattice defects in nickel , 1995 .

[43]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[44]  M. Doyle,et al.  Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .

[45]  G. Ciccotti,et al.  Hoover NPT dynamics for systems varying in shape and size , 1993 .

[46]  Aziz,et al.  The activation strain tensor: Nonhydrostatic stress effects on crystal-growth kinetics. , 1991, Physical review. B, Condensed matter.

[47]  H. Birnbaum,et al.  Hydrogen induced grain boundary fracture in high purity nickel and its alloys—Enhanced hydrogen diffusion along grain boundaries , 1988 .

[48]  Hoover,et al.  Constant-pressure equations of motion. , 1986, Physical review. A, General physics.

[49]  Foiles,et al.  Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys. , 1986, Physical review. B, Condensed matter.

[50]  Hoover,et al.  Canonical dynamics: Equilibrium phase-space distributions. , 1985, Physical review. A, General physics.

[51]  R. Jones,et al.  Modeling environmental effects on crack growth processes , 1985 .

[52]  S. Nosé.  A unified formulation of the constant temperature molecular dynamics methods , 1984 .

[53]  Robert A. Huggins,et al.  All‐Solid Lithium Electrodes with Mixed‐Conductor Matrix , 1981 .

[54]  R. Danner,et al.  Vacancy Solution Theory of Adsorption from Gas Mixtures , 1980 .

[55]  R. Danner,et al.  A gas adsorption isotherm equation based on vacancy solution theory , 1980 .

[56]  J. Li,et al.  Physical chemistry of some microstructural phenomena , 1978 .

[57]  J. Newman,et al.  Porous‐electrode theory with battery applications , 1975 .

[58]  Brian E. Conway,et al.  Modern Aspects of Electrochemistry , 1974 .

[59]  J. S. Rowlinson,et al.  Molecular Thermodynamics of Fluid-Phase Equilibria , 1969 .

[60]  S. Prussin,et al.  Generation and Distribution of Dislocations by Solute Diffusion , 1961 .