Author manuscript, published in "European Polymer Journal (2009) 601-612" A review on the Mullins ’ effect

Abstract The Mullins effect remains a major challenge in order to provide good mechanical modeling of the complex behavior of industrial rubber materials. It has been forty years since Mullins [Mullins L. Softening of rubber by deformation. Rubber Chem Technol 1969;42:339–62.] wrote his review on the phenomenon and still no general agreement has been found either on the physical source or on the mechanical modeling of this effect. Therefore, we reviewed the literature dedicated to this topic over the past six decades. We present the experimental evidences, which characterize the Mullins softening. The phenomenon is observed in filled rubbers and crystallizing pure gum. Then, the phenomenological models dedicated to fit the mechanical behavior of rubbers undergoing some Mullins softening are studied. To overcome the limit of a descriptive phenomenological modeling, several authors looked for a physical understanding of the phenomenon. Various theories have been proposed, but none of them has been supported unanimously. Nonetheless, these theories favor the emergence of physically based mechanical behavior laws. We tested some of these laws, which show little predictive abilities since the values of their parameters either cannot be measured experimentally or do not compare well with the physical quantities they are linked to.

[1]  J. Rault,et al.  Crystallization and Melting Processes in Vulcanized Stretched Natural Rubber , 2003 .

[2]  J. C. Simo,et al.  On a fully three-dimensional finite-strain viscoelastic damage model: Formulation and computational aspects , 1987 .

[3]  Al Dorfmann,et al.  Stress softening of elastomers in hydrostatic tension , 2003 .

[4]  Serdar Göktepe,et al.  A micro-macro approach to rubber-like materials. Part III: The micro-sphere model of anisotropic Mullins-type damage , 2005 .

[5]  Christian Miehe,et al.  Discontinuous and continuous damage evolution in Ogden-type large-strain elastic materials , 1995 .

[6]  Christian Miehe,et al.  Superimposed finite elastic–viscoelastic–plastoelastic stress response with damage in filled rubbery polymers. Experiments, modelling and algorithmic implementation , 2000 .

[7]  L. Mullins.  Effect of Stretching on the Properties of Rubber , 1948 .

[8]  R. Kazakevic̆iūtė-Makovska.  Experimentally determined properties of softening functions in pseudo-elastic models of the Mullins effect , 2007 .

[9]  A. R. Payne,et al.  Stress softening in natural rubber vulcanizates. Part IV. Unfilled vulcanizates , 1966 .

[10]  Y. Fukahori.  New progress in the theory and model of carbon black reinforcement of elastomers , 2005 .

[11]  Hubert M. James,et al.  Theory of the Elastic Properties of Rubber , 1943 .

[12]  L. Ernst,et al.  Hysteresis and time-dependent constitutive modelling of filled vulcanised rubber , 1999 .

[13]  A. Gent.  A New Constitutive Relation for Rubber , 1996 .

[14]  M. Klüppel,et al.  A generalized tube model of rubber elasticity and stress softening of filler reinforced elastomer systems , 2000 .

[15]  Erwan Verron,et al.  On the relevance of Continuum Damage Mechanics as applied to the Mullins effect in elastomers , 2004 .

[16]  H. G. Kilian,et al.  Universal properties in filler-loaded rubbers , 1994 .

[17]  L. Nasdala,et al.  On damage modelling for elastic and viscoelastic materials at large strain , 2001 .

[18]  L. Bokobza,et al.  On the Mullins Effect in Silica-Filled Polydimethylsiloxane Networks , 2001 .

[19]  U. Schomburg,et al.  A finite elastic–viscoelastic–elastoplastic material law with damage: theoretical and numerical aspects , 2003 .

[20]  L. Mullins,et al.  Stress softening in rubber vulcanizates. Part I. Use of a strain amplification factor to describe the elastic behavior of filler‐reinforced vulcanized rubber , 1965 .

[21]  L. Mullins,et al.  Theoretical Model for the Elastic Behavior of Filler-Reinforced Vulcanized Rubbers , 1957 .

[22]  Millard F. Beatty,et al.  The Mullins effect in equibiaxial extension and its influence on the inflation of a balloon , 1995 .

[23]  P. Albouy,et al.  Stress-Induced Crystallization and Reinforcement in Filled Natural Rubbers: 2H NMR Study , 2006 .

[24]  D. Parkinson,et al.  Breakage of Carbon-Rubber Networks by Applied Stress , 1952 .

[25]  A. R. Payne,et al.  Stress softening in natural rubber vulcanizates. Part III. Carbon black‐filled vulcanizates , 1966 .

[26]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[27]  L. Mullins.  Permanent Set in Vulcanized Rubber , 1949 .

[28]  Mary C. Boyce,et al.  Constitutive model for stretch-induced softening of the stress?stretch behavior of elastomeric materials , 2004 .

[29]  C. M. Roland.  Network Recovery from Uniaxial Extension: II. The Origin of the Mullins Effect , 1989 .

[30]  F. Bueche.  Molecular basis for the mullins effect , 1960 .

[31]  B. Trimmer,et al.  Muscle performance in a soft-bodied terrestrial crawler: constitutive modelling of strain-rate dependency , 2008, Journal of The Royal Society Interface.

[32]  Alexander Lion,et al.  A constitutive model for carbon black filled rubber: Experimental investigations and mathematical representation , 1996 .

[33]  D. Parkinson.  The reinforcement of rubber by carbon black , 1951 .

[34]  Ray W. Ogden,et al.  A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber , 2004 .

[35]  J. Gong,et al.  Large Strain Hysteresis and Mullins Effect of Tough Double-Network Hydrogels , 2007 .

[36]  P. Albouy,et al.  Chain orientation in natural rubber, Part I: The inverse yielding effect , 2005, The European physical journal. E, Soft matter.

[37]  G. Hamed,et al.  On the Role of Bound Rubber in Carbon-Black Reinforcement , 1989 .

[38]  G. Vigier,et al.  Influence of SiO2 fillers on the irradiation ageing of silicone rubbers , 2001 .

[39]  R. Ogden,et al.  A pseudo–elastic model for the Mullins effect in filled rubber , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[40]  Sanjay Govindjee,et al.  A micro-mechanically based continuum damage model for carbon black-filled rubbers incorporating Mullins' effect , 1991 .

[41]  G. Puglisi,et al.  A micromechanics-based model for the Mullins effect , 2006 .

[42]  E. B. Orler,et al.  Stress softening experiments in silica-filled polydimethylsiloxane provide insight into a mechanism for the Mullins effect , 2005 .

[43]  G. Marckmann,et al.  A theory of network alteration for the Mullins effect , 2002 .

[44]  J. Brennan,et al.  Strain Energy as a Criterion for Stress Softening in Carbon-Black-Filled Vulcanizates , 1966 .

[45]  L. Matějka,et al.  Description of the tensile stress–strain behaviour of filler-reinforced rubber-like networks using a Langevin-theory-based approach. Part II , 2000 .

[46]  H. Bouasse,et al.  Sur les courbes de traction du caoutchouc vulcanisé , 1903 .

[47]  Andrea Dall'Asta,et al.  Experimental tests and analytical model of high damping rubber dissipating devices , 2006 .

[48]  P. Ienny,et al.  A new ‘Tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: II. Application to the hyperelastic behaviour characterization of a carbon-black filled natural rubber vulcanizate , 2003 .

[49]  Mullins Effect for a Cylinder Subjected to Combined Extension and Torsion , 2007 .

[50]  A. Elías-Zúñiga.  A phenomenological energy-based model to characterize stress-softening effect in elastomers , 2005 .

[51]  P. Kakavas.  Mechanical properties of bonded elastomer discs subjected to triaxial stress , 1996 .

[52]  L. Treloar.  Crystallization Phenomena in Raw Rubber , 1942 .

[53]  J. A. Bea,et al.  An experimental study of the mouse skin behaviour: damage and inelastic aspects. , 2008, Journal of biomechanics.

[54]  Alan Muhr,et al.  Constitutive Models for Rubber , 1999 .

[55]  R. Ogden,et al.  On the modelling of amplitude and frequency-dependent properties in rubberlike solids , 2005 .

[56]  P. Gilormini,et al.  Observation and modeling of the anisotropic visco-hyperelastic behavior of a rubberlike material , 2006 .

[57]  C. M. Roland,et al.  Chain Ends and the Mullins Effect in Rubber , 1992 .

[58]  M. Boyce,et al.  Stress–strain behavior of thermoplastic polyurethanes , 2005 .

[59]  M. Beatty,et al.  The Mullins effect in compressible solids , 2000 .

[60]  G. Kraus,et al.  Stress softening in carbon black‐reinforced vulcanizates. Strain rate and temperature effects , 1966 .

[61]  Millard F. Beatty,et al.  A new phenomenological model for stress-softening in elastomers , 2002 .

[62]  P. Dubois,et al.  Biomechanical properties of vaginal tissue: preliminary results , 2008, International Urogynecology Journal.

[63]  Y. Fukahori.  Generalized Concept of the Reinforcement of Elastomers. Part 1: Carbon Black Reinforcement of Rubbers , 2007 .

[64]  Lucien Laiarinandrasana,et al.  Visco-hyperelastic model with internal state variable coupled with discontinuous damage concept under total Lagrangian formulation , 2003 .

[65]  Ray W. Ogden,et al.  A theory of stress softening of elastomers based on finite chain extensibility , 2004, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[66]  L. Treloar.  Crystallisation phenomena in raw rubber , 1941 .

[67]  D. Mayau,et al.  A constitutive model dealing with damage due to cavity growth and the Mullins effect in rubber-like materials under triaxial loading , 2008 .

[68]  P. Albouy,et al.  Effective Local Deformation in Stretched Filled Rubber , 2003 .

[69]  A. Wineman,et al.  On a constitutive theory for materials undergoing microstructural changes , 1990 .

[70]  Mathias Brieu,et al.  A damage directional constitutive model for Mullins effect with permanent set and induced anisotropy , 2006 .

[71]  A. R. Payne,et al.  Stress softening in natural rubber vulcanizates. Part II. Stress softening effects in pure gum and filler loaded rubbers , 1965 .

[72]  Ali Fatemi,et al.  Observations of the Constitutive Response and Characterization of Filled Natural Rubber Under Monotonic and Cyclic Multiaxial Stress States , 2004 .

[73]  R. Houwink.  Slipping of Molecules during the Deformation of Reinforced Rubber , 1956 .

[74]  Masayoshi Ito,et al.  Effects of rubber/filler interactions on deformation behavior of silica filled SBR systems , 2005 .

[75]  L. Mullins.  Softening of Rubber by Deformation , 1969 .

[76]  A. Gent,et al.  Crystallization and the relaxation of stress in stretched natural rubber vulcanizates , 1954 .

[77]  Simona Socrate,et al.  Deformation of thermoplastic vulcanizates , 2001 .

[78]  D. Besdo,et al.  A phenomenological constitutive model for rubberlike materials and its numerical applications , 2003 .

[79]  Millard F. Beatty,et al.  A theory of stress-softening in incompressible isotropic materials , 2000 .

[80]  D. Besdo,et al.  Properties of rubberlike materials under large deformations explained by self-organizing linkage patterns , 2003 .

[81]  A. R. Payne,et al.  Stress Softening in Natural Rubber Vulcanizates III. Carbon Black Filled Vulcanizates , 1966 .

[82]  Yoshiaki Okui,et al.  An improved hyperelasticity relation in modeling viscoelasticity response of natural and high damping rubbers in compression: experiments, parameter identification and numerical verification , 2002 .