Active endoscope with SMA (Shape Memory Alloy) coil springs

This paper describes the development of an active endoscope which allows a large bending angle for practical application and has a simple structure for miniaturization. An active endoscope (image fiber with 4200 pixels and light guide fiber) 2 mm in outer diameter with a shape memory alloy (SMA) actuator was designed and fabricated. The practical specifications of the SMA coil spring were determined based on a design chart and equation. The active endoscope consists of a bending part, the SMA actuator, and an endoscope. The mechanical properties of the bending part were investigated. The shear modulus of the SMA at room temperature and in the parent phase were determined in designing the actuators.

[1]  S. Hirose,et al.  Mathematical model and experimental verification of shape memory alloy for designing micro actuator , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[2]  M. Uchiyama,et al.  Active catheter with multi-link structure based on silicon micromachining , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[3]  M. Kohashi,et al.  A Fiber-optic Silicon Pressure Sensor For Ultra-thin Catheters , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[4]  P. Dario,et al.  An SMA-based flexible active endoscope for minimal invasive surgery , 1995 .

[5]  K. Tsuji.  Design of Ni-Ti-Cu Alloy Coil Spring , 1992 .

[6]  Masayoshi Esashi,et al.  Excimer laser induced CVD and its application to selective non-planar metallization , 1995 .