Parametrization in Laminate Design for Optimal Compliance

Abstract In this paper we consider the maximal stiffness design of laminated plates subjected to single and multiple loads. The stiffness of the laminates are parametrized in terms of the so-called lamination parameters. These express the relation between the material parameters for the laminate and the laminate lay-up and are given as moments of the trigonometric functions that appear in the well-known rotation formulae for stiffness matrices. These relations are here given in a form suitable for optimization studies. The conditions for the laminate itself to be orthotropic are also given directly in terms of the lamination parameters. The design problem is analyzed by performing a reformulation to an equivalent problem which is local in character and it is shown how this, together with an enlargement of the design space to allow for out of plane chattering designs, leads to a significant simplification of the problem. Thus, the number of variables is reduced to only four for the stiffness problem at hand, even in the general case with coupling stiffnesses and multiple loads. Moreover, in the special case of in-plane loads, the optimal solution for each design element of the plate can be realized as a single rotated ply of material or in special strain situations by two plies. A computational solution procedure for the simplified problem is described and several numerical examples illustrate basic features of the design approach.

[1]  M. Kreĭn,et al.  The Markov Moment Problem and Extremal Problems , 1977 .

[2]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[3]  P. Pedersen.  On optimal orientation of orthotropic materials , 1989 .

[4]  Hisao Fukunaga,et al.  Optimum Design of Composite Structures for Shape, Layer Angle and Layer Thickness Distributions , 1993 .

[5]  H. Fukunaga,et al.  Optimal design of symmetric laminated plates for fundamental frequency , 1994 .

[6]  Andrej Cherkaev,et al.  Optimal design of three-dimensional axisymmetric elastic structures , 1996 .

[7]  P. Pedersen.  Combining material and element rotation in one formula , 1990 .

[8]  G. A. Seregin,et al.  On the best position of elastic symmetry planes in an orthotropic body , 1981 .

[9]  W. S. Carswell,et al.  Progress in Science and Engineering of Composites: (2 volumes.) Edited by T. Hayashi, K. Kawata and S. Umekawa. 1982. North-Holland Publishing Co., Amsterdam. civ + 1890 pp. ISBN 0 444 86558 6. Price: US$212·75; Dfl. 500·00 , 1985 .

[10]  George S. Springer,et al.  Design of Composite Laminates by a Monte Carlo Method , 1993 .

[11]  M. Bendsøe,et al.  Shape optimization of structures for multiple loading conditions using a homogenization method , 1992 .

[12]  Kazimierz Malanowski,et al.  An Example of a Max-Min Problem in Partial Differential Equations , 1970 .

[13]  R. Lipton,et al.  On optimal reinforcement of plates and choice of design parameters , 1994 .

[14]  I. Ekeland,et al.  Convex analysis and variational problems , 1976 .

[15]  Robert Lipton,et al.  A new formulation of the problem of optimum reinforcement of Reissner-Mindlin plates , 1995 .

[16]  G. Allaire,et al.  Optimal design for minimum weight and compliance in plane stress using extremal microstructures , 1993 .

[17]  C. S. Jog,et al.  Topology design with optimized, self‐adaptive materials , 1994 .

[18]  Robert Lipton,et al.  A saddle-point theorem with application to structural optimization , 1994 .

[19]  P. Pedersen.  Bounds on elastic energy in solids of orthotropic materials , 1990 .

[20]  K. Schittkowski.  NLPQL: A fortran subroutine solving constrained nonlinear programming problems , 1986 .

[21]  Martin P. Bendsøe,et al.  Optimization of Structural Topology, Shape, And Material , 1995 .

[22]  Konstantin A. Lurie,et al.  Applied Optimal Control Theory of Distributed Systems , 1993 .

[23]  Hisao Fukunaga,et al.  Stiffness design method of symmetric laminates using lamination parameters , 1992 .

[24]  J. Ball.  A version of the fundamental theorem for young measures , 1989 .

[25]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[26]  J. Grenestedt,et al.  Layup optimization against buckling of shear panels , 1991 .

[27]  Garret N. Vanderplaats,et al.  Stiffness Optimization of Orthotropic Laminated Composites Using Lamination Parameters , 1991 .

[28]  M. Bendsøe,et al.  Optimal design of material properties and material distribution for multiple loading conditions , 1995 .

[29]  Peter Gudmundson,et al.  Layup Optimization of Composite Material Structures , 1993 .

[30]  Hisao Fukunaga,et al.  A Laminate Design for Elastic Properties of Symmetric Laminates with Extension-Shear or Bending-Twisting Coupling , 1994 .

[31]  Mitsunori Miki,et al.  Optimum Design of Laminated Composite Plates Using Lamination Parameters , 1993 .

[32]  Pauli Pedersen,et al.  Optimal Design with Advanced Materials , 1991 .