Study on the bending and shear properties of quasi-honeycomb sandwich structures considering the variable-density core design

[1]  S. Souissi,et al.  Mechanical properties of 3D printed parts: Effect of ultraviolet PLA filaments ageing and water absorption , 2022, Journal of Elastomers & Plastics.

[2]  M. Heidari-Rarani,et al.  Optimal design of a novel graded auxetic honeycomb core for sandwich beams under bending using digital image correlation (DIC) , 2022, Composite Structures.

[3]  Liang Gao,et al.  Design of graded lattice sandwich structures by multiscale topology optimization , 2021 .

[4]  Hugh Alan Bruck,et al.  Predicting failure modes of 3D-printed multi-material polymer sandwich structures from process parameters , 2021, Journal of Sandwich Structures & Materials.

[5]  G. McShane,et al.  Load Distribution on PET-G 3D Prints of Honeycomb Cellular Structures under Compression Load , 2021, Polymers.

[6]  C. Yang,et al.  In-plane shear response of a composite hexagonal honeycomb core under large deformation – A numerical and experimental study , 2021, Composite Structures.

[7]  M. Mahbod,et al.  Topology-optimized hybrid solid-lattice structures for efficient mechanical performance , 2021 .

[8]  A. W. Alshaer,et al.  An investigation of the strength and stiffness of weight-saving sandwich beams with CFRP face sheets and seven 3D printed cores , 2021 .

[9]  Jan-Anders E. Mansson,et al.  Distributed optical sensing for monitoring strain evolution during mechanical testing of composite laminates , 2021 .

[10]  L. Xiang,et al.  Out-of-plane crashworthiness of the new combined quasi-honeycomb core , 2020 .

[11]  A. Akbarzadeh,et al.  Bending behavior of optimally graded 3D printed cellular beams , 2020 .

[12]  Sansan Ding,et al.  Crashworthiness of innovative hexagonal honeycomb-like structures subjected to out-of-plane compression , 2020 .

[13]  Gieljan Vantyghem,et al.  Density-based topology optimization for 3D-printable building structures , 2019, Structural and Multidisciplinary Optimization.

[14]  Lixiao Li,et al.  Octet-truss cellular materials for improved mechanical properties and specific energy absorption , 2019, Materials & Design.

[15]  Jinxiang Chen,et al.  The flexural properties of end-trabecular beetle elytron plates and their flexural failure mechanism , 2019, Journal of Materials Science.

[16]  Guolei Zheng,et al.  Optimal design, analysis and additive manufacturing for two-level stochastic honeycomb structure , 2019, Int. J. Comput. Integr. Manuf..

[17]  A. Akbarzadeh,et al.  3D printed meta-sandwich structures: Failure mechanism, energy absorption and multi-hit capability , 2018, Materials & Design.

[18]  Luis Paulo Reis,et al.  The effect of geometry on the flexural properties of cellular core structures , 2018, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[19]  A. Akbarzadeh,et al.  3D printed architected polymeric sandwich panels: Energy absorption and structural performance , 2018, Composite Structures.

[20]  Christophe Bouvet,et al.  Experimental and numerical analysis of the shear nonlinear behaviour of Nomex honeycomb core: Application to insert sizing , 2018, Composite Structures.

[21]  D. Therriault,et al.  Architected multi-directional functionally graded cellular plates , 2018, Materials & Design.

[22]  Qing Li,et al.  Experimental and numerical studies on indentation and perforation characteristics of honeycomb sandwich panels , 2018 .

[23]  Stephen J. Ludwick,et al.  Natural frequency optimization of 3D printed variable-density honeycomb structure via a homogenization-based approach , 2017 .

[24]  George A. Kardomateas,et al.  Structural and Failure Mechanics of Sandwich Composites , 2011 .

[25]  Guorong Song.  Measurement of Surface Acoustic Wave Velocity Curves of Silicon Crystal by Ultrasonic Method , 2018 .

[26]  Devi K. Kalla,et al.  Experimental characterization of the tensile strength of ABS parts manufactured by fused deposition modeling process , 2017 .