A review on the recent development of incremental sheet-forming process

[1]  Paul A. Meehan,et al.  Two-directional toolpath correction in single-point incremental forming using model predictive control , 2017 .

[2]  Mehdi Vahdati,et al.  Investigation of the ultrasonic vibration effect in incremental sheet metal forming process , 2017 .

[3]  Saeid Amini,et al.  An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet , 2017 .

[4]  Paul A. Meehan,et al.  Deformation analysis in single-point incremental forming through finite element simulation , 2017 .

[5]  Zhou Bo,et al.  Large-scale sheet deformation process by electromagnetic incremental forming combined with stretch forming , 2016 .

[6]  Kornel Ehmann,et al.  An Efficient and General Finite Element Model for Double-Sided Incremental Forming , 2016 .

[7]  C. Magnus.  Joule heating of the forming zone in incremental sheet metal forming: Part 2 , 2016, The International Journal of Advanced Manufacturing Technology.

[8]  Markus Bambach,et al.  Fast simulation of incremental sheet metal forming by adaptive remeshing and subcycling , 2016 .

[9]  Jun Chen,et al.  Development of novel tools for electricity-assisted incremental sheet forming of titanium alloy , 2016 .

[10]  Laurent Duchene,et al.  Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements , 2016 .

[11]  F. Teymoori,et al.  Numerical analysis of fluid structure interaction in water jet incremental sheet forming process using coupled Eulerian–Lagrangian approach , 2016 .

[12]  Saeid Amini,et al.  Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current , 2016 .

[13]  K. Al-Ghamdi,et al.  On the comparison of formability of roll-bonded steel-Cu composite sheet metal in incremental forming and stamping processes , 2016, The International Journal of Advanced Manufacturing Technology.

[14]  Paul A. Meehan,et al.  Model predictive control of incremental sheet forming for geometric accuracy improvement , 2016 .

[15]  Joost Duflou,et al.  Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions , 2016 .

[16]  Paul A. Meehan,et al.  Deformation mechanics and efficient force prediction in single point incremental forming , 2015 .

[17]  Paul A. Meehan,et al.  Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology , 2015 .

[18]  Jian Cao,et al.  Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool , 2014 .

[19]  Paul A. Meehan,et al.  Experimental Study and Efficient Prediction on Forming Forces in Incremental Sheet Forming , 2014 .

[20]  Joost Duflou,et al.  A Comprehensive Analysis of Electric Energy Consumption of Single Point Incremental Forming Processes , 2014 .

[21]  Paul A. Meehan,et al.  Efficient force prediction for incremental sheet forming and experimental validation , 2014 .

[22]  Paul A. Meehan,et al.  Simulation and Experimental Observations of Effect of Different Contact Interfaces on the Incremental Sheet Forming Process , 2014 .

[23]  Kai Zhong,et al.  Electromagnetic incremental forming (EMIF): A novel aluminum alloy sheet and tube forming technology , 2014 .

[24]  Masaaki Amino,et al.  Current Status of “Dieless” Amino's Incremental Forming , 2014 .

[25]  Jian Cao,et al.  Incremental Sheet Metal Forming Processes , 2014 .

[26]  Giuseppe Ingarao,et al.  Analysis of Energy Efficiency of Different Setups Able to Perform Single Point Incremental Forming (SPIF) Processes , 2014 .

[27]  Dongkai Xu,et al.  A Comparative Study on Process Potentials for Frictional Stir- and Electric Hot-assisted Incremental Sheet Forming☆ , 2014 .

[28]  David Adams,et al.  Improvements on Single Point Incremental Forming Through Electrically Assisted Forming, Contact Area Prediction and Tool Development , 2013 .

[29]  P. Meehan,et al.  Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming , 2013 .

[30]  Dongkai Xu,et al.  Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming , 2013 .

[31]  On Uma Lasunon,et al.  Surface Roughness in Incremental Sheet Metal Forming of AA5052 , 2013 .

[32]  R. Malhotra,et al.  Deformation mechanics in single-point and accumulative double-sided incremental forming , 2013, The International Journal of Advanced Manufacturing Technology.

[33]  Jack Jeswiet,et al.  Investigation of Energy, Carbon Dioxide Emissions and Costs in Single Point Incremental Forming , 2013 .

[34]  I. Ferrer,et al.  The Effect of Process Parameters on the Energy Consumption in Single Point Incremental Forming , 2013 .

[35]  Joost Duflou,et al.  Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations , 2012 .

[36]  Jack Jeswiet,et al.  Initial analysis of cost, energy and carbon dioxide emissions in single point incremental forming – producing an aluminium hat , 2012 .

[37]  Ted Belytschko,et al.  Mechanics of fracture in single point incremental forming , 2012 .

[38]  Giuseppe Ingarao,et al.  A sustainability point of view on sheet metal forming operations: material wasting and energy consumption in incremental forming and stamping processes , 2012 .

[39]  Bijan Mollaei Dariani,et al.  Analysis of incremental sheet metal forming using the upper-bound approach , 2012 .

[40]  Jean-Louis Batoz,et al.  Comparison between incremental deformation theory and flow rule to simulate sheet-metal forming processes , 2012 .

[41]  Jian Cao,et al.  Exergy analysis of incremental sheet forming , 2012, Prod. Eng..

[42]  Giuseppina Ambrogio,et al.  Improving industrial suitability of incremental sheet forming process , 2012 .

[43]  Sami Kara,et al.  Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach , 2012 .

[44]  Jian Cao,et al.  Improvement of Geometric Accuracy in Incremental Forming by Using a Squeezing Toolpath Strategy With Two Forming Tools , 2011 .

[45]  Peter Hartley,et al.  An assessment of various process strategies for improving precision in single point incremental forming , 2011 .

[46]  Jian Cao,et al.  Formability and Surface Finish Studies in Single Point Incremental Forming , 2011 .

[47]  Stephen Duncan,et al.  Optimization of tool trajectory for Incremental Sheet Forming using closed loop control , 2011, 2011 IEEE International Conference on Automation Science and Engineering.

[48]  Niels Bay,et al.  Failure mechanisms in single-point incremental forming of metals , 2011 .

[49]  Meftah Hrairi,et al.  Research and Progress in Incremental Sheet Forming Processes , 2011 .

[50]  F. Kosel,et al.  Water jet incremental sheet metal forming: pressure distribution analysis , 2011 .

[51]  C. Henrard,et al.  Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity , 2011 .

[52]  Aldo Attanasio,et al.  On forces, formability and geometrical error in metal incremental sheet forming , 2011 .

[53]  Jun Gu,et al.  Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction , 2011 .

[54]  Horst Meier,et al.  Impact of superimposed pressure on dieless incremental sheet metal forming with two moving tools , 2011 .

[55]  Jian Cao,et al.  Automatic 3D Spiral Toolpath Generation for Single Point Incremental Forming , 2010 .

[56]  Antonio Formisano,et al.  Comparison between analytical and experimental roughness values of components created by incremental forming , 2010 .

[57]  Markus Bambach,et al.  A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness , 2010 .

[58]  Julian M. Allwood,et al.  The effect of partially cut-out blanks on geometric accuracy in incremental sheet forming , 2010 .

[59]  M Ham,et al.  Small data set analysis in surface metrology: an investigation using a single point incremental forming case study. , 2010, Scanning.

[60]  Philip Eyckens,et al.  Formability in Incremental Sheet Forming: Generalization of the Marciniak-Kuczynski Model (Vervormbaarheid in incrementele plaatvormgeving: veralgemening van het Marciniak-Kuczynski model) , 2010 .

[61]  Joost R. Duflou,et al.  Force prediction for single point incremental forming deduced from experimental and FEM observations , 2010 .

[62]  Aldo Attanasio,et al.  Analysis of forces, accuracy and formability in positive die sheet incremental forming , 2009 .

[63]  Julian M. Allwood,et al.  Generalised forming limit diagrams showing increased forming limits with non-planar stress states , 2009 .

[64]  Stephen R. Duncan,et al.  Rigid plastic model of incremental sheet deformation using second‐order cone programming , 2009 .

[65]  G. Hussain,et al.  A new formability indicator in single point incremental forming , 2009 .

[66]  J. Gelin,et al.  Experimental Investigations and Numerical Analysis for Improving Knowledge of Incremental Sheet Forming Process for Sheet Metal Parts , 2009 .

[67]  Markus Bambach,et al.  Strategies to improve the geometric accuracy in asymmetric single point incremental forming , 2009, Prod. Eng..

[68]  Julian M. Allwood,et al.  The mechanics of incremental sheet forming , 2009 .

[69]  Karl Kuzman,et al.  Autonomous on-line system for fracture identification at incremental sheet forming , 2009 .

[70]  Karl Kuzman,et al.  Deformations and forces analysis of single point incremental sheet metal forming , 2009 .

[71]  Ghulam Hussain,et al.  Electric hot incremental forming: A novel technique , 2008 .

[72]  Nasir Hayat,et al.  Tool and lubrication for negative incremental forming of a commercially pure titanium sheet , 2008 .

[73]  L. Vihtonen,et al.  Comparing two robot assisted incremental forming methods: incremental forming by pressing and incremental hammering , 2008 .

[74]  A. Potiron,et al.  On some computational aspects for incremental sheet metal forming simulations , 2008 .

[75]  Manabu Gotoh,et al.  Numerical simulation of incremental forming of sheet metal , 2008 .

[76]  Joost R. Duflou,et al.  Improved SPIF performance through dynamic local heating , 2008 .

[77]  Joost Duflou,et al.  Identification of material parameters to predict Single Point Incremental Forming forces , 2008 .

[78]  A. H. van den Boogaard,et al.  Tensile tests with bending: a mechanism for incremental forming. , 2008 .

[79]  L.-W. Ma,et al.  Three-dimensional finite element method simulation of sheet metal single-point incremental forming and the deformation pattern analysis , 2008 .

[80]  Aldo Attanasio,et al.  Asymmetric two points incremental forming: Improving surface quality and geometric accuracy by tool path optimization , 2008 .

[81]  Niels Bay,et al.  Single‐point incremental forming and formability—failure diagrams , 2008 .

[82]  Paulo A.F. Martins,et al.  Revisiting the fundamentals of single point incremental forming by means of membrane analysis , 2008 .

[83]  Niels Bay,et al.  Theory of single point incremental forming , 2008 .

[84]  W. C. Emmensa,et al.  An overview of stabilizing deformation mechanisms in incremental sheet forming , 2008 .

[85]  O Lasunon,et al.  Comparative investigation of single-point and double-point incremental sheet metal forming processes , 2007 .

[86]  Antonio Formisano,et al.  Evaluation of the maximum slope angle of simple geometries carried out by incremental forming process , 2007 .

[87]  L. Xue.  Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading , 2007 .

[88]  Fabrizio Micari,et al.  Shape and dimensional accuracy in Single Point Incremental Forming: State of the art and future trends , 2007 .

[89]  A. Erman Tekkaya,et al.  The Increased Forming Limits of Incremental Sheet Forming Processes , 2007 .

[90]  A. Raithatha,et al.  Second order cone programming in modeling incremental deformation , 2007, 2007 American Control Conference.

[91]  Paul Vanherck,et al.  Experimental study on force measurements for single point incremental forming , 2007 .

[92]  Alexander Szekeres,et al.  Force Measurement in Pyramid Shaped Parts with a Spindle Mounted Force Sensor , 2007 .

[93]  Horst Meier,et al.  Two Point Incremental Forming with Two Moving Forming Tools , 2007 .

[94]  L. Gao,et al.  A novel method to test the thinning limits of sheet metals in negative incremental forming , 2007 .

[95]  Dong-Yol Yang,et al.  FE-analysis of sheet metal forming processes using continuous contact treatment , 2007 .

[96]  Joost Duflou,et al.  Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming , 2007 .

[97]  Johan Verbert,et al.  Laser Assisted Incremental Forming: Formability and Accuracy Improvement , 2007 .

[98]  Giuseppina Ambrogio,et al.  An analytical model for improving precision in single point incremental forming , 2007 .

[99]  I. Cerro,et al.  Theoretical and experimental analysis of the dieless incremental sheet forming process , 2006 .

[100]  Fabrizio Micari,et al.  A force measuring based strategy for failure prevention in incremental forming , 2006 .

[101]  Jack Jeswiet,et al.  Single Point Incremental Forming and the Forming Criteria for AA3003 , 2006 .

[102]  Fabrizio Micari,et al.  On-Line Control of Single Point Incremental Forming Operations through Punch Force Monitoring , 2006 .

[103]  M. Muzzupappa,et al.  Application of Incremental Forming process for high customised medical product manufacturing , 2005 .

[104]  J. Jeswiet,et al.  Forces in Single Point and Two Point Incremental Forming , 2005 .

[105]  Julian M. Allwood,et al.  The Design of an Incremental Sheet Forming Machine , 2005 .

[106]  Paul Vanherck,et al.  Force Measurements for Single Point Incremental Forming: An Experimental Study , 2005 .

[107]  J Jeswiet,et al.  Forming limit diagrams for single-point incremental forming of aluminium sheet , 2005 .

[108]  Julian M. Allwood,et al.  A structured search for applications of the incremental sheet-forming process by product segmentation , 2005 .

[109]  Joost Duflou,et al.  Asymmetric single point incremental forming of sheet metal , 2005 .

[110]  Christophe Henrard,et al.  Development of a contact model adapted to incremental forming , 2005 .

[111]  J Jeswiet,et al.  Wall thickness variations in single-point incremental forming , 2004 .

[112]  Aldo Attanasio,et al.  Experimental and simulative results in sheet incremental forming on CNC machines , 2004 .

[113]  E Hagan,et al.  Analysis of surface roughness for parts formed by computer numerical controlled incremental forming , 2004 .

[114]  Fabrizio Micari,et al.  Process Mechanics Analysis in Single Point Incremental Forming , 2004 .

[115]  Markus Bambach,et al.  Forming strategies and Process Modelling for CNC Incremental Sheet Forming , 2004 .

[116]  Jong-jin Park,et al.  Fundamental studies on the incremental sheet metal forming technique , 2003 .

[117]  Hideo Iseki,et al.  Flexible and Incremental Bulging of Sheet Metal Using High-Speed Water Jet , 2001 .

[118]  M. Shim,et al.  The formability of aluminum sheet in incremental forming , 2001 .

[119]  H. Iseki,et al.  An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller , 2001 .

[120]  J. Jeswiet,et al.  Incremental Single Point Forming , 2000, Manufacturing Engineering.

[121]  Dong-Yol Yang,et al.  Improvement of formability for the incremental sheet metal forming process , 2000 .

[122]  Koro Yaejima,et al.  Metal-flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminum sheets. , 1996 .

[123]  Betzalel Avitzur,et al.  Analysis of power spinning of cones , 1960 .