From single phase to dual-phase TRIP-TWIP titanium alloys: Design approach and properties

[1]  J. Yeom,et al.  Development of sub-grained α+β Ti alloy with high yield strength showing twinning- and transformation-induced plasticity , 2020 .

[2]  W. M. Rainforth,et al.  ω phase strengthened 1.2GPa metastable β titanium alloy with high ductility , 2019, Scripta Materialia.

[3]  D. Choudhuri,et al.  Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy , 2019, Scientific Reports.

[4]  S. Mantri,et al.  On the heterogeneous nature of deformation in a strain-transformable beta metastable Ti-V-Cr-Al alloy , 2019, Acta Materialia.

[5]  F. Prima,et al.  Design of strain-transformable titanium alloys , 2018, Comptes Rendus Physique.

[6]  J. Lei,et al.  Mechanical properties and deformation mechanisms of Ti-3Al-5Mo-4.5 V alloy with varied β phase stability , 2018, Journal of Materials Science & Technology.

[7]  Ruixiao Zheng,et al.  Development of a high strength and high ductility near β-Ti alloy with twinning induced plasticity effect , 2018, Scripta Materialia.

[8]  Bin Chen,et al.  Omega transitional structure associated with {112}<111> deformation twinning in a metastable beta Ti-Nb alloy, revealed by atomic resolution high-angle annular dark-field scanning transmission electron microscopy , 2018, Journal of Alloys and Compounds.

[9]  Jian Sun,et al.  Phase stability and tensile behavior of metastable β Ti-V-Fe and Ti-V-Fe-Al alloys , 2018, Materials Characterization.

[10]  L. P. Karjalainen,et al.  Effect of cold rolling and subsequent annealing on grain refinement of a beta titanium alloy showing stress-induced martensitic transformation , 2018, Materials Science and Engineering: A.

[11]  F. Lin,et al.  Transmission of {332}〈113〉 twins across grain boundaries in a metastable β-titanium alloy , 2018, International Journal of Plasticity.

[12]  L. P. Karjalainen,et al.  On the compressive deformation behavior of new beta titanium alloys designed by d-electron method , 2018 .

[13]  F. Prima,et al.  Fabrication and characterization of a novel β metastable Ti-Mo-Zr alloy with large ductility and improved yield strength , 2018 .

[14]  Yu Yang,et al.  Stress release-induced interfacial twin boundary ω phase formation in a β type Ti-based single crystal displaying stress-induced α” martensitic transformation , 2018 .

[15]  L. P. Karjalainen,et al.  A new multi-element beta titanium alloy with a high yield strength exhibiting transformation and twinning induced plasticity effects , 2018 .

[16]  D. Choudhuri,et al.  Strengthening strategy for a ductile metastable β-titanium alloy using low-temperature aging , 2017 .

[17]  S. Bruschi,et al.  Correlation between alpha phase morphology and tensile properties of a new beta titanium alloy , 2017 .

[18]  I. Guillot,et al.  Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity , 2017 .

[19]  Y. Yang,et al.  Reversion of a Parent {130}⟨310⟩_{α^{''}} Martensitic Twinning System at the Origin of {332}⟨113⟩_{β} Twins Observed in Metastable β Titanium Alloys. , 2016, Physical review letters.

[20]  Wang Wei,et al.  Role of grain size in tensile behavior in twinning-induced plasticity β Ti-20V-2Nb-2Zr alloy , 2016 .

[21]  C. Tasan,et al.  From electronic structure to phase diagrams: A bottom-up approach to understand the stability of titanium–transition metal alloys , 2016 .

[22]  C. Tasan,et al.  On the mechanism of {332} twinning in metastable β titanium alloys , 2016 .

[23]  F. Prima,et al.  A β-titanium alloy with extra high strain-hardening rate: Design and mechanical properties , 2016 .

[24]  C. Tasan,et al.  Origin of shear induced β to ω transition in Ti–Nb-based alloys , 2015 .

[25]  C. Dong,et al.  Structural Stabilities of β-Ti Alloys Studied Using a New Mo Equivalent Derived from [β/(α + β)] Phase-Boundary Slopes , 2015, Metallurgical and Materials Transactions A.

[26]  F. Prima,et al.  In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys , 2015 .

[27]  D. Wexler,et al.  The influence of β phase stability on deformation mode and compressive mechanical properties of Ti–10V–3Fe–3Al alloy , 2015 .

[28]  F. Prima,et al.  The Role of Stress Induced Martensite in Ductile Metastable Beta Ti-alloys Showing Combined TRIP/TWIP Effects , 2015 .

[29]  F. Prima,et al.  A new titanium alloy with a combination of high strength, high strain hardening and improved ductility , 2015 .

[30]  H. Hosoda,et al.  Origin of {3 3 2} twinning in metastable β-Ti alloys , 2014 .

[31]  Geping Li,et al.  {112} {111} Twinning during ω to body-centered cubic transition , 2014 .

[32]  F. Prima,et al.  Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects , 2013 .

[33]  James C. Williams,et al.  Perspectives on Titanium Science and Technology , 2013 .

[34]  F. Prima,et al.  On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects , 2012 .

[35]  E. Bourhis,et al.  Synchrotron X-ray diffraction experiments with a prototype hybrid pixel detector , 2012 .

[36]  D. Raabe,et al.  Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging , 2011 .

[37]  Changrong Li,et al.  Thermodynamic description of the Cr–Sn–Ti system , 2010 .

[38]  Ashutosh Kumar Singh,et al.  Structure of orthorhombic martensitic phase in binary Ti–Nb alloys , 2009 .

[39]  M. Barnett,et al.  Effect of particles on the formation of deformation twins in a magnesium-based alloy , 2009 .

[40]  S. Kamat,et al.  Effect of Al and Nb on the trigger stress for stress-induced martensitic transformation during tensile loading in Ti–Al–Nb alloys , 2008 .

[41]  H. Xing,et al.  Mechanical twinning and omega transition by ⟨111⟩ {112} shear in a metastable β titanium alloy , 2008 .

[42]  C. H. Ward,et al.  A comparative study of the mechanical properties of high-strength -titanium alloys , 2008 .

[43]  P. Delpierre,et al.  A 20 kpixels CdTe photon-counting imager using XPAD chip , 2008 .

[44]  S. Kamat,et al.  Various stages in stress–strain curve of Ti–Al–Nb alloys undergoing SIMT , 2007 .

[45]  M. Morinaga,et al.  General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters , 2006 .

[46]  S. Brandstetter,et al.  From Micro‐ to Macroplasticity , 2006 .

[47]  G. Saada.  Hall–Petch revisited , 2005 .

[48]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[49]  O. Bouaziz,et al.  Modelling of TWIP effect on work-hardening , 2001 .

[50]  H. Yukawa,et al.  Alloy Design Based on Molecular Orbital Method , 2005 .

[51]  O. Izumi,et al.  Transmission electron microscopic observations of mechanical twinning in metastable beta titanium alloys , 1986 .

[52]  E. Sukedai,et al.  Stress induced products and ductility due to lattice instability of β phase single crystal of Ti-Mo alloys , 1982 .

[53]  J. B. Clark.  Transmission electron microscopy study of age hardening in a Mg-5 wt.% Zn alloy , 1965 .

[54]  J. Silcock.  An X-ray examination of the to phase in TiV, TiMo and TiCr alloys , 1958 .