Flow regimes in a spout-fluid bed : A combined experimental and simulation study

Spout?fluid beds find a widespread application in the process industry for efficient contacting of large particles with a gas. However, detailed understanding of the complex behavior of these systems is lacking, which leads to significant scale-up problems in industry. In this paper we report results of a combined experimental and simulation study on the various regimes, which can be encountered during spout-fluid bed operation. A regime map for a 3D spout-fluid bed was composed employing spectral analysis of pressure drop fluctuations and fast video recordings. In addition 3D Euler?Lagrange computations were performed to assess the capability of the model to reproduce the experimentally observed flow regimes. The influence of the drag closure on the model results was assessed and the influence of the computational grid was studied using a new method for the implementation of the two-way coupling, which is proposed in this paper. For most regimes our model is able to predict the appropriate regime. The frequency, at which the largest power is found, is overpredicted by the model. Contrary to the experimental observations, our model did not predict any large slugs in the slugging bed regime. The remaining differences between the simulated and experimentally observed bed behavior is most likely related to the representation of the effective fluid-particle interaction in our model, which relies on local spatial homogeneity.

[1]  S. Ergun.  Fluid flow through packed columns , 1952 .

[2]  Reghan J. Hill,et al.  INERTIAL EFFECTS IN SUSPENSION AND POROUS-MEDIA FLOWS , 2001 .

[3]  Agba D. Salman,et al.  Accurate measurement of particle impact parameters , 1999 .

[4]  Jam Hans Kuipers,et al.  A numerical study of fluidization behavior of Geldart A particles using a discrete particle model , 2004 .

[5]  Masao Sakamoto,et al.  Quasi-three-dimensional numerical simulation of spouted beds in cylinder , 2000 .

[6]  A. Nagarkatti,et al.  Pressure and flow characteristics of a gas phase spout-fluid bed and the minimum spout-fluid condition , 1974 .

[7]  J. Kuipers,et al.  Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: A hard-sphere approach. , 1996 .

[8]  John Happel,et al.  Viscous flow in multiparticle systems: Slow motion of fluids relative to beds of spherical particles , 1958 .

[9]  J. Westerweel.  Fundamentals of digital particle image velocimetry , 1997 .

[10]  C. Wen.  Mechanics of Fluidization , 1966 .

[11]  H. Littman,et al.  Flow regimes for spout‐fluid beds , 1984 .

[12]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[13]  Jam Hans Kuipers,et al.  Digital image analysis measurements of bed expansion and segregation dynamics in dense gas-fluidized beds , 2003 .

[14]  V. Swaaij,et al.  Hydrodynamic modeling of dense gas-fluidised beds using the kinetic theory of granular flow: effect of coefficient of restitution on bed dynamics , 2000 .

[15]  John R. Grace,et al.  Spouted bed and spout‐fluid bed behaviour in a column of diameter 0.91 m , 1992 .

[16]  John R. Grace,et al.  Hydrodynamics of spout-fluid beds , 1985 .

[17]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[18]  G. M. Lazarek,et al.  An axisymmetric model of flow in the annulus of a spouted bed of coarse particles. Model, experimental verification and residence time distribution , 1985 .

[19]  R. D. Felice,et al.  The voidage function for fluid-particle interaction systems , 1994 .