Theoretical Considerations: Implant Positional Index Design

Rotational freedom of implant positional indices in two-piece implants was investigated. The aim of the study was to determine, analytically, the rotational freedom of three different positional index designs, based on the hypothesis that it is not influenced by their geometric principle. Regular polygonal, polygon profile, and cam-groove patterns were analyzed. Schematic descriptions were made and idealized equations developed. Parameters influencing the extent of rotational freedom were identified for the different positional index designs. A general equation that describes the rotational freedom of differently designed indices was also formulated. The present analysis showed that the rotational freedom of positional indices can be analytically calculated and is influenced by different parameters. The rotational freedom of the positional index of commonly used implant-abutment connections depends on their geometric design and size.

[1]  David B. Dooner,et al.  Mechanical Design of Machine Elements and Machines: A Failure Prevention Perspective , 2002 .

[2]  P P Binon,et al.  The effect of implant/abutment hexagonal misfit on screw joint stability. , 1996, The International journal of prosthodontics.

[3]  H. Iplikçioğlu,et al.  Dynamic fatigue resistance of implant-abutment junction in an internally notched morse-taper oral implant: influence of abutment design. , 2004, Clinical oral implants research.

[4]  J. Bernard,et al.  Treatment of completely edentulous patients with fixed implant-supported restorations: three consecutive cases of simultaneous immediate loading in both maxilla and mandible. , 2005, The international journal of periodontics & restorative dentistry.

[5]  K. Nelson,et al.  Fabrication of a fixed retrievable implant-supported prosthesis based on electroforming: a technical report. , 2008, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[6]  C E English,et al.  EXTERNALLY HEXED IMPLANTS, ABUTMENTS, AND TRANSFER DEVICES: A COMPREHENSIVE OVERVIEW , 1992, Implant dentistry.

[7]  Akihiko Hashimoto,et al.  Effect of lateral cyclic loading on abutment screw loosening of an external hexagon implant system. , 2004, The Journal of prosthetic dentistry.

[8]  H. Matsumura,et al.  Marginal fit and microgaps of implant-abutment interface with internal anti-rotation configuration. , 2008, Dental materials journal.

[9]  Carlo Ercoli,et al.  Evaluation of the marginal precision of one-piece complete arch titanium frameworks fabricated using five different methods for implant-supported restorations. , 2008, Clinical oral implants research.

[10]  Ameen Khraisat,et al.  Stability of implant-abutment interface with a hexagon-mediated butt joint: failure mode and bending resistance. , 2005, Clinical implant dentistry and related research.

[11]  C. Elias,et al.  Comparison of external and internal hex implants' rotational freedom: a pilot study. , 2005, The International journal of prosthodontics.

[12]  P I Brånemark,et al.  A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. , 1981, International journal of oral surgery.

[13]  C. Francischone,et al.  In vitro comparative analysis of the fit of gold alloy or commercially pure titanium implant-supported prostheses before and after electroerosion. , 2004, The Journal of prosthetic dentistry.

[14]  P P Binon,et al.  Implants and components: entering the new millennium. , 2000, The International journal of oral & maxillofacial implants.

[15]  P. Branemark,et al.  Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. , 1977, Scandinavian journal of plastic and reconstructive surgery. Supplementum.

[16]  Murat Cavit Cehreli,et al.  Evaluation of the mechanical characteristics of the implant-abutment complex of a reduced-diameter morse-taper implant. A nonlinear finite element stress analysis. , 2003, Clinical oral implants research.

[17]  C. Ercoli,et al.  Measurement of the rotational misfit and implant-abutment gap of all-ceramic abutments. , 2007, The International journal of oral & maxillofacial implants.

[18]  S. Karlsson,et al.  An in vitro load evaluation of a conical implant system with 2 abutment designs and 3 different retaining-screw alloys. , 2006, The International journal of oral & maxillofacial implants.

[19]  T. Schink,et al.  Effects of repeated manual disassembly and reassembly on the positional stability of various implant-abutment complexes: an experimental study. , 2010, The International journal of oral & maxillofacial implants.

[20]  Paolo Vigolo,et al.  An in vitro evaluation of titanium, zirconia, and alumina procera abutments with hexagonal connection. , 2006, The International journal of oral & maxillofacial implants.