Temperature acceleration of time-dependent dielectric breakdown

A model is proposed for predicting the temperature dependence of time-to-breakdown t/sub BD/ in MOS circuits. While a previous study proposed a field-dependent activation energy, this model predicts that the activation energy for t/sub BD/ is dependent on both the oxide quality and the applied field. This explains the wide range of activation energies reported in the literature. The modeling of the activation energy and temperature acceleration factor as a function of t/sub BD/ is introduced in order to compare test results from different oxide technologies. The activation energy is found to increase with the breakdown time. This model provides good estimates of oxide lifetime for voltages down to 5 V and for temperatures between 25 and 150 degrees C. On the basis of the proposed model, an oxide with a lifetime of 1000 years at 25 degrees C is expected to last 47 years at 75 degrees C and 4.8 years at 125 degrees C. >

[1]  J. McPherson,et al.  Acceleration Factors for Thin Gate Oxide Stressing , 1985, 23rd International Reliability Physics Symposium.

[2]  Studies of trapping and conduction in ultrathin SiO 2 gate insulators , 1984 .

[3]  N. Kawamura,et al.  Reliability of 6-10 nm thermal SiO2films showing intrinsic dielectric integrity , 1985, IEEE Transactions on Electron Devices.

[4]  Yasuaki Hokari,et al.  Dielectric breakdown wearout limitation of thermally-grown thin-gate oxides , 1990 .

[5]  Chiou-Feng Chen,et al.  The dielectric reliability of intrinsic thin SiO 2 films thermally grown on a heavily doped Si substrate—characterization and modeling , 1987 .

[6]  Dennis Wendell,et al.  Predicting Oxide Failure Rates using the Matrix of a 64K DRAM Chip , 1984, 22nd International Reliability Physics Symposium.

[7]  M. H. Woods,et al.  Reliability in MOS integrated circuits , 1984, 1984 International Electron Devices Meeting.

[8]  Jack C. Lee,et al.  Modeling and characterization of gate oxide reliability , 1988 .

[9]  Ih-Chin Chen,et al.  Electrical breakdown in thin gate and tunneling oxides , 1985 .

[10]  Dwight L. Crook,et al.  Method of Determining Reliability Screens for Time Dependent Dielectric Breakdown , 1979, 17th International Reliability Physics Symposium.

[11]  K. Taniguchi,et al.  Time-dependent-dielectric breakdown of thin thermally grown SiO2films , 1985, IEEE Transactions on Electron Devices.

[12]  Chenming Hu,et al.  Projecting the minimum acceptable oxide thickness for time-dependent dielectric breakdown , 1988, Technical Digest., International Electron Devices Meeting.