Effect of surrounding tissue on vessel fluid and solid mechanics.

There is no doubt that atherosclerosis is one of the most important health problems in the Western Societies. It is well accepted that atherosclerosis is associated with abnormal stress and strain conditions. A compelling observation is that the epicardial arteries develop atherosclerosis while the intramural arteries do not. Atherosclerotic changes involving the epicardial portion of the coronary artery stop where the artery penetrates the myocardium. The objective of the present study is to understand the fluid and solid mechanical differences between the two types of vessels. A finite element analysis was employed to investigate the effect of external tissue contraction on the characteristics of pulsatile blood flow and the vessel wall stress distribution. The sequential coupling of fluid-solid interaction (FSI) revealed that the changes of flow velocity and wall shear stress, in response to cyclical external loading, appear less important than the circumferential stress and strain reduction in the vessel wall under the proposed boundary conditions. These results have important implications since high stresses and strains can induce growth, remodeling, and atherosclerosis; and hence we speculate that a reduction of stress and strain may be atheroprotective. The importance of FSI in deformable vessels with pulsatile flow is discussed and the fluid and solid mechanics differences between epicardial and intramural vessels are highlighted.

[1]  M. Thubrikar,et al.  Pressure-induced arterial wall stress and atherosclerosis. , 1995, The Annals of thoracic surgery.

[2]  J I Hoffman,et al.  Pressure-flow relations in coronary circulation. , 1990, Physiological reviews.

[3]  S. Molloi,et al.  Effect of passive myocardium on the compliance of porcine coronary arteries. , 2003, American journal of physiology. Heart and circulatory physiology.

[4]  S. Atluri ALTERNATE STRESS AND CONJUGATE STRAIN MEASURES, AND MIXED VARIATIONAL FORMULATIONS INVOLVING RIGID ROTATIONS, FOR COMPUTATIONAL ANALYSES OF FINITELY DEFORMED SOLIDS, WITH APPLICATION TO PLATES AND SHELLS-I , 1984 .

[5]  Y C Fung,et al.  On residual stresses in arteries. , 1986, Journal of biomechanical engineering.

[6]  M. Zamir,et al.  The Physics of Pulsatile Flow , 2000, Biological Physics Series.

[7]  J. P. Paul,et al.  Biomechanics , 1966 .

[8]  S. Wolf,et al.  Anatomical and Physiological Characteristics of Arteries , 1979 .

[9]  Eckart Fleck,et al.  Shear stress and vascular remodeling: study of cardiac allograft coronary artery disease as a model of diffuse atherosclerosis. , 2002, The Journal of heart and lung transplantation : the official publication of the International Society for Heart Transplantation.

[10]  Thomas J. R. Hughes,et al.  Finite element modeling of blood flow in arteries , 1998 .

[11]  M. Thubrikar,et al.  The freedom from atherosclerosis of intramyocardial coronary arteries: reduction of mural stress--a key factor. , 1994, European Journal of Cardio-Thoracic Surgery.

[12]  A D Hughes,et al.  Blood flow and vessel mechanics in a physiologically realistic model of a human carotid arterial bifurcation. , 2000, Journal of biomechanics.

[13]  Aleksander S Popel,et al.  Wall shear stress differentially affects NO level in arterioles for volume expanders and Hb-based O2 carriers. , 2003, Microvascular research.

[14]  Y. Fung,et al.  The pattern of coronary arteriolar bifurcations and the uniform shear hypothesis , 2006, Annals of Biomedical Engineering.

[15]  A Rachev,et al.  Theoretical study of dynamics of arterial wall remodeling in response to changes in blood pressure. , 1996, Journal of biomechanics.

[16]  S. N. Atluri,et al.  On the formulation of variational theorems involving volume constraints , 1989 .

[17]  R. Schroter,et al.  Atheroma and arterial wall shear - Observation, correlation and proposal of a shear dependent mass transfer mechanism for atherogenesis , 1971, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[18]  M. Pinotti,et al.  Modeling and simulation of pulsatile blood flow with a physiologic wave pattern. , 2003, Artificial organs.

[19]  Ghassan S. Kassab,et al.  The Coronary Vasculature and its Reconstruction , 2000, Annals of Biomedical Engineering.

[20]  J. M. T. Penrose,et al.  Implicit fluid–structure coupling for simulation of cardiovascular problems , 2002 .

[21]  Rainald Löhner,et al.  Blood flow modeling in carotid arteries with computational fluid dynamics and MR imaging. , 2002, Academic radiology.

[22]  Kozaburo Hayashi,et al.  Theoretical Study of the Effects of Vascular Smooth Muscle Contraction on Strain and Stress Distributions in Arteries , 1999, Annals of Biomedical Engineering.

[23]  K. W. Lee,et al.  Modelling of flow and wall behaviour in a mildly stenosed tube. , 2002, Medical engineering & physics.

[24]  Hans Gregersen,et al.  Remodelling of the left anterior descending artery in a porcine model of supravalvular aortic stenosis , 2002, Journal of hypertension.

[25]  F P T Baaijens,et al.  A three-dimensional computational analysis of fluid-structure interaction in the aortic valve. , 2003, Journal of biomechanics.

[26]  C. Loudon,et al.  The use of the dimensionless Womersley number to characterize the unsteady nature of internal flow. , 1998, Journal of theoretical biology.

[27]  Y C Fung,et al.  The degree of nonlinearity and anisotropy of blood vessel elasticity. , 1997, Proceedings of the National Academy of Sciences of the United States of America.

[28]  M. Debakey,et al.  Patterns of Atherosclerosis and their Surgical Significance , 1985, Annals of surgery.