AN EFFICIENT HIGHER-ORDER ZIGZAG THEORY FOR LAMINATED PLATES SUBJECTED TO THERMAL LOADING

A new efficient higher order zigzag theory is presented for laminated plates under thermal loading. The third order zigzag model is modified by replacing the uniform across the thickness approximation for the deflection with a layer-wise variable approximation for deflection which explicitly accounts for the transverse thermal strain. The thermal field is approximated as piecewise linear across the sub-layers. The displacement field is expressed in terms of the thermal field and only five primary displacement variables by satisfying exactly the conditions of zero transverse shear stresses at the top and the bottom and their continuity at the layer interfaces. The governing equations are derived using the principle of virtual work. Comparison of Navier solutions for simply-supported rectangular test plate devised for this study and composite and sandwich plates with the exact three-dimensional thermo-elasticity solutions for two kinds of thermal loads establishes that the present efficient zigzag theory is generally more accurate than the existing zigzag theory.

[1]  Ahmed K. Noor,et al.  Three‐Dimensional Solutions for Initially Stressed Structural Sandwiches , 1994 .

[2]  T. R. Tauchert,et al.  THERMOELASTIC ANALYSTS OF LAMINATED PLATES. 2: ANTISYMMETRIC CROSS-PLY AND ANGLE-PLY LAMINATES , 1980 .

[3]  Ahmed K. Noor,et al.  Evaluation of Transverse Thermal Stresses in Composite Plates Based on First-Order Shear Deformation Theory , 1998 .

[4]  Ahmed K. Noor,et al.  Computational Models for High-Temperature Multilayered Composite Plates and Shells , 1992 .

[5]  J. Whitney,et al.  Shear Correction Factors for Orthotropic Laminates Under Static Load , 1973 .

[6]  Erasmo Carrera,et al.  Temperature Profile Influence on Layered Plates Response Considering Classical and Advanced Theories , 2002 .

[7]  A. K. Noor,et al.  An assessment of five modeling approaches for thermo-mechanical stress analysis of laminated composite panels , 2000 .

[8]  Y. Stavsky,et al.  Thermoelasticity of Heterogeneous Aeolotropic Plates , 1963 .

[9]  Ji-Fan He Thermoelastic analysis of laminated plates including transverse shear deformation effects , 1995 .

[10]  Tarun Kant,et al.  Finite element thermal stress analysis of composite laminates using a higher-order theory , 1994 .

[11]  T. R. Tauchert,et al.  Thermoelastic analysis of laminated plates. I - Symmetric specially orthotropic laminates , 1980 .

[12]  Yu. V. Nemirovskii On the theory of thermoelastic bending of reinforced shells and plates , 1972 .

[13]  B. P. Patel,et al.  Hygrothermal effects on the structural behaviour of thick composite laminates using higher-order theory , 2002 .

[14]  Raimund Rolfes,et al.  Higher-order theories for thermal stresses in layered plates , 2001 .

[15]  Yong Hyup Kim,et al.  Re-analysis procedure for laminated plates using FSDT finite element model , 2002 .

[16]  John Argyris,et al.  Recent Advances in Computational Thermostructural Analysis of Composite Plates and Shells With Strong Nonlinearities , 1997 .

[17]  R. C. Averill,et al.  Thick beam theory and finite element model with zig-zag sublaminate approximations , 1996 .

[18]  J. Reddy Mechanics of laminated composite plates : theory and analysis , 1997 .

[19]  Jun-Sik Kim,et al.  Dynamic Analysis for Delaminated Composites Using DKQ Concept Based on Higher-Order Zig-Zag Theory , 2003 .

[20]  T. K. Varadan,et al.  A new theory for accurate thermal/mechanical flexural analysis of symmetric laminated plates , 1999 .

[21]  H. Murakami,et al.  Assessment of plate theories for treating the thermomechanical response of layered plates , 1993 .

[22]  Santosh Kapuria,et al.  An efficient higher order zigzag theory for composite and sandwich beams subjected to thermal loading , 2003 .

[23]  J. Locke Thermal-mechanical stress analysis of inhomogeneous antisymmetric cross-ply laminates , 1997 .

[24]  T. R. Tauchert,et al.  Thermally Induced Flexure, Buckling, and Vibration of Plates , 1991 .

[25]  Erasmo Carrera,et al.  AN ASSESSMENT OF MIXED AND CLASSICAL THEORIES FOR THE THERMAL STRESS ANALYSIS OF ORTHOTROPIC MULTILAYERED PLATES , 2000 .

[26]  George E. Blandford,et al.  High-order thermoelastic composite plate theories: an analytic comparison , 1993 .

[27]  J. N. Reddy,et al.  EFFECTS OF SHEAR DEFORMATION AND ANISOTROPY ON THE THERMAL BENDING OF LAYERED COMPOSITE PLATES , 1980 .

[28]  A. Noor,et al.  Three-dimensional solutions for coupled thermoelectroelastic response of multilayered plates , 1995 .

[29]  K. M. Rao,et al.  Three dimensional exact solution of thermal stresses in rectangular composite laminate , 1994 .

[30]  A. Noor,et al.  Accurate determination of transverse normal stresses in sandwich panels subjected to thermomechanical loadings , 1999 .

[31]  J. Reddy,et al.  Thermal stresses and deflections of cross-ply laminated plates using refined plate theories , 1991 .

[32]  Xiaoping Shu,et al.  Thermomechanical buckling of laminated composite plates with higher-order transverse shear deformation , 1994 .