A unified algorithm to determine the reachable and dexterous workspace of parallel manipulators

This paper presents a novel idea for determining the reachable and dexterous workspace of parallel manipulators. Both the reachable workspace and dexterous workspace are utmost important for optimal design and performance comparison of manipulators, because each configuration or point in this region has specified kinematic dexterity by the designer. We propose a uniform algorithm, called stratified workspace boundary determining algorithm (SWBDA), which considers various physical and contrived constraints. The problems of determining the reachable and dexterous workspace boundaries are defined and the unified method is applied to solve all the problems of this kind. The validity and efficiency of the proposed method are verified with two kinds of representative parallel manipulator, since their relational results were studied in literatures. Finally, the advantages of the proposed method are summarized by comparing with other methods.

[1]  Xin-Jun Liu,et al.  A New Approach to the Design of a DELTA Robot with a Desired Workspace , 2004, J. Intell. Robotic Syst..

[2]  Gregory Walsh,et al.  Optimization of a three DOF translational platform for well-conditioned workspace , 1997, Proceedings of International Conference on Robotics and Automation.

[3]  J. Duffy,et al.  An Optimization Approach to the Determination of the Boundaries of Manipulator Workspaces , 2000 .

[4]  Kai Zhou,et al.  On the workspace of spatial parallel manipulator with multi-translational degrees of freedom , 2005 .

[5]  Zhen Huang,et al.  Analysis of the Workspace and Singularity of Planar 2-DOF Parallel Manipulator with Actuation Redundancy , 2006, 2006 International Conference on Mechatronics and Automation.

[6]  F. A. Adkins,et al.  Numerical Algorithms for Mapping Boundaries of Manipulator Workspaces , 1996 .

[7]  C. Gosselin.  Determination of the Workspace of 6-DOF Parallel Manipulators , 1990 .

[8]  Tatsuo Arai,et al.  Design, analysis and construction of a prototype parallel link manipulator , 1990, EEE International Workshop on Intelligent Robots and Systems, Towards a New Frontier of Applications.

[9]  Jing-Shan Zhao,et al.  Optimizing the kinematic chains for a spatial parallel manipulator via searching the desired dexterous workspace , 2007 .

[10]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[11]  Jan A. Snyman,et al.  The chord method for the determination of nonconvex workspaces of planar parallel manipulators , 2002 .

[12]  Jan A. Snyman,et al.  A multi-level optimization methodology for determining the dextrous workspaces of planar parallel manipulators , 2005 .

[13]  Kai Zhou,et al.  Workspace of parallel manipulators with symmetric identical kinematic chains , 2006 .

[14]  T. Huang,et al.  Determination of the carriage stroke of 6-PSS parallel manipulators having the specific orientation capability in a prescribed workspace , 2000, Proceedings 2000 ICRA. Millennium Conference. IEEE International Conference on Robotics and Automation. Symposia Proceedings (Cat. No.00CH37065).

[15]  Jean-Pierre Merlet,et al.  Determination of the orientation workspace of parallel manipulators , 1995, J. Intell. Robotic Syst..

[16]  Clément Gosselin,et al.  A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .

[17]  Zhe Wang,et al.  A study on workspace, boundary workspace analysis and workpiece positioning for parallel machine tools , 2001 .

[18]  Damien Chablat,et al.  An Interval Analysis Based Study for the Design and the Comparison of Three-Degrees-of-Freedom Parallel Kinematic Machines , 2004, Int. J. Robotics Res..

[19]  Fulei Chu,et al.  Symmetrical characteristics of the workspace for spatial parallel mechanisms with symmetric structure , 2008 .