Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenario

Abstract To elucidate the load-resisting mechanisms of three-dimensional steel-frame-composite-floor systems (3D composite floor systems) under internal column removal scenario, such as tensile membrane action and catenary action, a large-scale experimental test was conducted. A two-by-two bay specimen was tested quasi-statically to failure by using a special loading and restraint system. The test specimen was scaled down from a prototype structure to a 1/3 model due to laboratory space constraint. Based on this test, the load-deflection response of the 3D composite floor subjected to internal column loss is obtained. Besides, the peak load-carrying and deformation capacities are obtained and the failure modes are discussed in detail. Stress states and deformation of the floor components including steel beams and decking are also presented. To gain deeper insight into the load-resisting mechanisms, the respective contributions of individual floor system components are separated, which include the double-span girder, double-span secondary beam and composite slabs. Finally, the vertical load redistribution among surrounding columns is evaluated to find the load transfer path at large deformation stage.

[1]  Sashi K. Kunnath,et al.  Macromodel-Based Simulation of Progressive Collapse: Steel Frame Structures , 2008 .

[2]  Bo Yang,et al.  Numerical analyses of steel beam-column joints subjected to catenary action , 2012 .

[3]  Joseph A. Main,et al.  Composite Floor Systems under Column Loss: Collapse Resistance and Tie Force Requirements , 2014 .

[4]  Bo Yang,et al.  Numerical simulations on three-dimensional composite structural systems against progressive collapse , 2017 .

[5]  Larry Alan Fahnestock,et al.  Experimental behavior of a half-scale steel concrete composite floor system subjected to column removal scenarios , 2016 .

[6]  Kyungkoo Lee,et al.  Simplified nonlinear progressive collapse analysis of welded steel moment frames , 2009 .

[7]  Gian A. Rassati,et al.  Seismic response of MRFs with partially-restrained bolted beam-to-column connections through FE analyses , 2015 .

[8]  Sherif El-Tawil,et al.  Three-Dimensional Effects and Collapse Resistance Mechanisms in Steel Frame Buildings , 2014 .

[9]  David A. Nethercot,et al.  Progressive collapse of multi-storey buildings due to sudden column loss — Part I: Simplified assessment framework , 2008 .

[10]  Yasser Alashker,et al.  A design-oriented model for the collapse resistance of composite floors subjected to column loss , 2011 .

[11]  Fahim Sadek,et al.  Performance of Steel Moment Connections under a Column Removal Scenario. I: Experiments , 2013 .

[12]  Feng Fu,et al.  3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings — Parametric study , 2010 .

[13]  Fahim Sadek,et al.  Testing and Analysis of Steel Beam-Column Assemblies under Column Removal Scenarios , 2009 .

[14]  Theodor Krauthammer,et al.  Blast-resistant structural concrete and steel connections , 1999 .

[15]  Kang Hai Tan,et al.  Experimental tests of different types of bolted steel beam–column joints under a central-column-removal scenario , 2013 .

[16]  Dan Dubina,et al.  Experimental testing and numerical analysis of 3D steel frame system under column loss , 2016 .

[17]  Sherif El-Tawil,et al.  Collapse Behavior of Steel Special Moment Resisting Frame Connections , 2007 .

[18]  Halil Sezen,et al.  Progressive collapse testing and analysis of a steel frame building , 2014 .

[19]  Halil Sezen,et al.  Experimental and analytical progressive collapse assessment of a steel frame building , 2013 .

[20]  E. Brunesi,et al.  Extreme response of reinforced concrete buildings through fiber force-based finite element analysis , 2014 .

[21]  Eric B. Williamson,et al.  Robustness Assessment of Building Structures under Explosion , 2012 .