Measuring Dynamic Nonlinearity of Digitizers Affected by Time Base Distortion

Dynamic nonlinearity is a well-known major source of signal corruption in digital scopes and A/D conversion channels in general, particularly when dealing with fast signals and high sampling rates. This paper shows that the dynamic nonlinearity cannot be correctly measured without taking into account the systematic errors affecting the sampling instants (time base distortion) and presents two methods (nonparametric and parametric) to obtain accurate measurements in the presence of such errors. Both simulations and experimental results are provided to illustrate the problems arising with traditional methodologies and the accuracy of the proposed one.

[1]  Izzet Kale,et al.  Frequency domain analysis for dynamic nonlinearity measurement in A/D converters , 2004, Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference (IEEE Cat. No.04CH37510).

[2]  Filippo Attivissimo,et al.  A/D converters nonlinearity measurement and correction by frequency analysis and dither , 2003, IEEE Trans. Instrum. Meas..

[3]  F. Filicori,et al.  A modified Volterra series approach for the characterization of non-linear dynamic systems , 1996, Quality Measurement: The Indispensable Bridge between Theory and Reality (No Measurements? No Science! Joint Conference - 1996: IEEE Instrumentation and Measurement Technology Conference and IMEKO Tec.

[4]  C. H. Papadimitriou,et al.  Improved Compensation for Analog-to-Digital Converters , 1991 .

[5]  C. Morandi,et al.  An improved code density test for the dynamic characterization of flash A/D converters , 1994 .

[6]  M. Kahrs,et al.  50 years of RF and microwave sampling , 2003 .

[7]  F. Attivissimo,et al.  Measuring Dynamic Nonlinearity in High-Speed Digital Scopes , 2007, 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007.

[8]  Pasquale Arpaia,et al.  A new bidimensional histogram for the dynamic characterization of ADCs , 2003, IEEE Trans. Instrum. Meas..

[9]  Filippo Attivissimo,et al.  Measuring Time Base Distortion in Analog-Memory Sampling Digitizers , 2008, IEEE Transactions on Instrumentation and Measurement.

[10]  K. Lever,et al.  Applications of higher-order statistics to modelling, identification and cancellation of nonlinear distortion in high-speed samplers and analogue-to-digital converters using the Volterra and Wiener models , 1993, [1993 Proceedings] IEEE Signal Processing Workshop on Higher-Order Statistics.

[11]  Donald M. Hummels,et al.  Using sine wave histograms to estimate analog-to-digital converter dynamic error functions , 1998, IEEE Trans. Instrum. Meas..

[12]  K. Lever,et al.  Nonlinear System Compensation Based on , 2001 .

[13]  Pier Andrea Traverso,et al.  A nonlinear dynamic S/H-ADC device model based on a modified Volterra series: identification procedure and commercial CAD tool implementation , 2003, IEEE Trans. Instrum. Meas..

[14]  Pasquale Arpaia,et al.  A comprehensive phase-spectrum approach to metrological characterization of hysteretic ADCs , 2002, IEEE Trans. Instrum. Meas..

[15]  F. Adamo,et al.  MEASUREMENT OF ADC INTEGRAL NONLINEARITY VIA DFT , 2000 .

[16]  K. Lever,et al.  Improved error-table compensation of A/D converters , 1997 .

[17]  Yves Rolain,et al.  An identification technique for data acquisition characterization in the presence of nonlinear distortions and time base distortions , 2001, IEEE Trans. Instrum. Meas..