Annealing of P3HT:PCBM blend film--the effect on its optical properties.

Annealing is a common method to improve the efficiency of polymer photovoltaic cells. Annealing changes the microphase separation in a polymer blend film and typically also results in a change in its optical properties. We investigated the optical properties of poly(3-hexylthiophene) (P3HT):[6,6]-phenyl C61 butyric acid methyl ester (PCBM) before and after thermal annealing using spectroscopic ellipsometry and transmission measurements, with simultaneous fitting of samples with different thicknesses to ensure reliability of extracted index of refraction values. We found that, after annealing, it is necessary to consider an anisotropic model to describe the properties of P3HT:PCBM blend films, which reflects the increased order of P3HT chains as a result of annealing. Different fitting models (simple anisotropic layer, graded isotropic, graded anisotropic model, generalized oscillator, and oscillator model including Huang-Rhys vibronic envelope) have been compared and discussed. The effect of the number of samples used for fitting and surface roughness corrections is also discussed.

[1]  H. Hoppe,et al.  Optical order of the polymer phase within polymer/fullerene blend films , 2012 .

[2]  S. Meskers,et al.  Influence of Photon Excess Energy on Charge Carrier Dynamics in a Polymer‐Fullerene Solar Cell , 2012 .

[3]  O. Inganäs,et al.  Polarization anisotropy of charge transfer absorption and emission of aligned polymer: fullerene blend films , 2012 .

[4]  S. Logothetidis,et al.  Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance , 2012 .

[5]  D. E. Motaung,et al.  Temperature-dependence on the optical properties and the phase separation of polymer–fullerene thin films , 2012, Journal of Materials Science.

[6]  M. Urien,et al.  Polymeric solar cells based on P3HT:PCBM: Role of the casting solvent , 2011 .

[7]  Lionel Hirsch,et al.  P3HT:PCBM, Best Seller in Polymer Photovoltaic Research , 2011, Advanced materials.

[8]  A. Donald,et al.  Nanoscale Phase Separation of P3HT PCBM Thick Films As Measured by Small-Angle X-ray Scattering , 2011 .

[9]  H. Hoppe,et al.  Ellipsometric Investigation of the Shape of Nanodomains in Polymer/Fullerene Films , 2011 .

[10]  M. Dadmun,et al.  A new model for the morphology of P3HT/PCBM organic photovoltaics from small-angle neutron scattering: rivers and streams. , 2011, ACS nano.

[11]  Tao Wang,et al.  Evolution of Structure, Optoelectronic Properties, and Device Performance of Polythiophene:Fullerene Solar Cells During Thermal Annealing , 2011 .

[12]  A. Goñi,et al.  Real-time studies during coating and post-deposition annealing in organic semiconductors , 2011 .

[13]  J. Lagemaat,et al.  Optical characterization of pristine poly(3‐hexyl thiophene) films , 2011 .

[14]  M. Mackay,et al.  Nanoparticle agglomeration in polymer-based solar cells. , 2010, Physical review letters.

[15]  A. Djurišić,et al.  Accurate Determination of the Index of Refraction of Polymer Blend Films by Spectroscopic Ellipsometry , 2010 .

[16]  Shane R. Yost,et al.  Charge transfer state versus hot exciton dissociation in polymer-fullerene blended solar cells. , 2010, Journal of the American Chemical Society.

[17]  M. Mackay,et al.  Nanoparticle concentration profile in polymer-based solar cells , 2010 .

[18]  H. Tsuji,et al.  Surface segregation at the aluminum interface of poly(3-hexylthiophene)/ fullerene solar cells , 2010 .

[19]  W. Su,et al.  Regioregularity effects in the chain orientation and optical anisotropy of composite polymer/fullerene films for high-efficiency, large-area organic solar cells , 2009 .

[20]  James N. Hilfiker,et al.  Survey of methods to characterize thin absorbing films with Spectroscopic Ellipsometry , 2008 .

[21]  Gang Li,et al.  Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells , 2008 .

[22]  Jenny Nelson,et al.  Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends. , 2008, Nature materials.

[23]  Klaus Meerholz,et al.  Controlling Morphology in Polymer–Fullerene Mixtures , 2008 .

[24]  Jin Young Kim,et al.  Effect of the Molecular Weight of Poly(3-hexylthiophene) on the Morphology and Performance of Polymer Bulk Heterojunction Solar Cells , 2007 .

[25]  Brandon M. Vogel,et al.  Measuring molecular order in poly(3-alkylthiophene) thin films with polarizing spectroscopies. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[26]  O. Ambacher,et al.  Absorption and crystallinity of poly(3-hexylthiophene)/fullerene blends in dependence on annealing temperature , 2006 .

[27]  F. Spano.  Absorption in regio-regular poly(3-hexyl)thiophene thin films: Fermi resonances, interband coupling and disorder , 2006 .

[28]  Donal D. C. Bradley,et al.  A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells , 2006 .

[29]  Harald Hoppe,et al.  Effect of annealing of poly(3-hexylthiophene)/fullerene bulk heterojunction composites on structural and optical properties , 2006 .

[30]  Oliver Ambacher,et al.  Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells , 2006 .

[31]  Donal D. C. Bradley,et al.  Exploring the potential of ellipsometry for the characterisation of electronic, optical, morphologic and thermodynamic properties of polyfluorene thin films , 2005 .

[32]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[33]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[34]  Hans-Heinrich Hörhold,et al.  Molecular weight dependence of birefringence of thin films of the conjugated polymer poly[2-methoxy-5-(2 '-ethyl-hexyloxy)-1, 4-phenylenevinylene] , 2004 .

[35]  Jiang,et al.  Two-dimensional electronic excitations in self-assembled conjugated polymer nanocrystals , 2000, Science.

[36]  L. Pettersson,et al.  Spectroscopic ellipsometry studies of the optical properties of doped poly(3,4-ethylenedioxythiophene): an anisotropic metal , 1998 .

[37]  K. Haenen,et al.  Absorption phenomena in organic thin films for solar cell applications investigated by photothermal deflection spectroscopy , 2005 .