Vacuum-assisted precision molding of 3D thin microstructure glass optics

The continuously rising demands in the today’s photonic market towards increasing precision, high surface finish, geometrical complexity yet low cost for thin microstructure glass optics require advanced fabrication technologies. The conventional method via grinding and polishing is limited to those applications mainly due to the unavoidable deformation caused by mechanical stress between lenses and clamping parts. Over the last decade, replication technology such as thermal slumping has become an advanced method in manufacturing complex and precision thin lenses. However, the technology efficiency is strongly diminished by incomplete glass flow into mold cavity and extremely long processing time. In contrast, such deficits can be avoided by a novel molding process with vacuum assistance, recently developed at Fraunhofer IPT. The vacuum-assisted molding promises an effective and reliable technology in the fabrication of high precision thin glass optics for mass production. In this paper, the newly developed molding concept is firstly presented. Besides, this research introduces a numerical implementation based on an enhanced material model characterizing glass behavior at high temperature near softening point, which is crucial to study the internal stress, surface tension and form accuracy of the thin glass. With the help of simulation, the influences of process parameters will be discussed. Experiments were performed for the validation, and the accuracy of the molded glass with microstructure features is discussed in detail. Finally, the experiment results of both thermal slumping and vacuum-assisted molding are compared to illustrate the process efficiency and guidance for industrial applications is delivered.

[1]  Fritz Klocke,et al.  A hybrid optimization approach in non-isothermal glass molding , 2016 .

[2]  T. Matsumura,et al.  Influence of tool inclination on brittle fracture in glass cutting with ball end mills , 2008 .

[3]  Jiwang Yan,et al.  Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions , 2016 .

[4]  Fritz Klocke,et al.  Glass Material Modeling and its Molding Behavior , 2017 .

[5]  Gang Liu,et al.  Development of a flexible and reliable numerical simulation for precision glass molding of complex glass optics , 2012, Other Conferences.

[6]  R. Hudec,et al.  Slumping monitoring of glass and silicone foils for x-ray space telescopes , 2011, Optical Engineering + Applications.

[7]  Fritz Klocke,et al.  Nonisothermal glass molding for the cost-efficient production of precision freeform optics , 2016 .

[8]  Georg Böhm,et al.  Ultra-precision surface finishing by ion beam and plasma jet techniques—status and outlook , 2010 .

[9]  Ekkard Brinksmeier,et al.  Advances in micro ultrasonic assisted lapping of microstructures in hard–brittle materials: a brief review and outlook , 2005 .

[10]  Lijuan Su,et al.  Investigation of glass thickness effect on thermal slumping by experimental and numerical methods , 2011 .

[11]  Jiwang Yan,et al.  Comparing Microgroove Array Forming with Micropyramid Array Forming in the Glass Molding Press , 2010 .

[12]  M. Arai,et al.  Characterization of the Thermo-Viscoelastic Property of Glass and Numerical Simulation of the Press Molding of Glass Lens , 2009 .

[13]  Mohamed Bader Boubaker,et al.  Finite element simulation of the slumping process of a glass plate using 3D generalized viscoelastic Maxwell model , 2014 .

[14]  Tsunemoto Kuriyagawa,et al.  Investigation on shape transferability in ultraprecision glass molding press for microgrooves , 2011 .

[15]  Fritz Klocke,et al.  Replicative manufacturing of complex lighting optics by non-isothermal glass molding , 2016, Optical Engineering + Applications.

[16]  M. Mitsuishi,et al.  High-efficiency and precision cutting of glass by selective laser-assisted milling , 2017 .

[17]  O. Dambon,et al.  Non‐Isothermal Glass Moulding of Complex Led Optics , 2017 .

[18]  H. Wensink.  Fabrication of microstructures by powder blasting , 2002 .

[19]  Olaf Dambon,et al.  Birefringence measurement for validation of simulation of precision glass molding process , 2017 .