Optimization of machine learning models for predicting the compressive strength of fiber-reinforced self-compacting concrete

[1]  T. Rabczuk,et al.  Analysis of three-dimensional potential problems in non-homogeneous media with physics-informed deep collocation method using material transfer learning and sensitivity analysis , 2020, Engineering with Computers.

[2]  Guido De Roeck,et al.  An efficient stochastic-based coupled model for damage identification in plate structures , 2021, Engineering Failure Analysis.

[3]  Mohammad Reza Ghasemi,et al.  The life-cycle cost analysis based on probabilistic optimization using a novel algorithm , 2021 .

[4]  Timon Rabczuk,et al.  Presenting innovative ensemble model for prediction of the load carrying capacity of composite castellated steel beam under fire , 2021 .

[5]  Hisham Alabduljabbar,et al.  A Comparative Study for the Prediction of the Compressive Strength of Self-Compacting Concrete Modified with Fly Ash , 2021, Materials.

[6]  Binh Thai Pham,et al.  Metaheuristic optimization of Levenberg–Marquardt-based artificial neural network using particle swarm optimization for prediction of foamed concrete compressive strength , 2021, Neural Computing and Applications.

[7]  Alireza Bigdeli,et al.  Surrogate models for the prediction of damage in reinforced concrete tunnels under internal water pressure , 2021, Journal of Zhejiang University-SCIENCE A.

[8]  S. Praveenkumar,et al.  Fresh and mechanical characteristics of roselle fibre reinforced self-compacting concrete incorporating fly ash and metakaolin , 2021, Construction and Building Materials.

[9]  Magd Abdel Wahab,et al.  An improved Artificial Neural Network using Arithmetic Optimization Algorithm for damage assessment in FGM composite plates , 2021 .

[10]  T. Rabczuk,et al.  Computational predictions for predicting the performance of steel 1 panel shear wall under explosive loads , 2021 .

[11]  Aydin Shishegaran,et al.  Prediction of the load-carrying capacity of reinforced concrete connections under post-earthquake fire , 2021, Journal of Zhejiang University-SCIENCE A.

[12]  M. Skaf,et al.  Models for compressive strength estimation through non-destructive testing of highly self-compacting concrete containing recycled concrete aggregate and slag-based binder , 2021 .

[13]  J. S. Huang,et al.  Data-driven machine learning approach for exploring and assessing mechanical properties of carbon nanotube-reinforced cement composites , 2021, Composite Structures.

[14]  Seyed Saeid Rahimian Koloor,et al.  Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete , 2021 .

[15]  Mohammad Ali Naghsh,et al.  An innovative model for predicting the displacement and rotation of column-tree moment connection under fire , 2021 .

[16]  M. Harihanandh,et al.  Study on mechanical properties of fiber reinforced self compacting concrete , 2021 .

[17]  Wang Hao,et al.  Automatic laser profile recognition and fast tracking for structured light measurement using deep learning and template matching , 2021 .

[18]  M. Shokrollahi,et al.  A novel ensemble model for predicting the performance of a novel vertical slot fishway , 2021 .

[19]  H. Tran-Ngoc,et al.  A novel machine-learning based on the global search techniques using vectorized data for damage detection in structures , 2020 .

[20]  K. B. Ramkumar,et al.  A Review on Performance of Self-Compacting Concrete – Use of Mineral Admixtures and Steel Fibres with Artificial Neural Network Application , 2020 .

[21]  Moncef L. Nehdi,et al.  Machine learning prediction of mechanical properties of concrete: Critical review , 2020 .

[22]  Tung Pham Thanh,et al.  Compressive Strength Evaluation of Fiber-Reinforced High-Strength Self-Compacting Concrete with Artificial Intelligence , 2020 .

[23]  Naif Alajlan,et al.  Deep Autoencoder based Energy Method for the Bending, Vibration, and Buckling Analysis of Kirchhoff Plates , 2020, European Journal of Mechanics - A/Solids.

[24]  Xiaoying Zhuang,et al.  Stochastic deep collocation method based on neural architecture search and transfer learning for heterogeneous porous media , 2020, Engineering with Computers.

[25]  Mohammad Ali Naghsh,et al.  Performance of fixed beam without interacting bars , 2020, Frontiers of Structural and Civil Engineering.

[26]  Mohammad Sadegh Es-haghi,et al.  Evaluation of a novel Asymmetric Genetic Algorithm to optimize the structural design of 3D regular and irregular steel frames , 2020, Frontiers of Structural and Civil Engineering.

[27]  Timon Rabczuk,et al.  High correlated variables creator machine: Prediction of the compressive strength of concrete , 2020, Computers & Structures.

[28]  H. Nguyen-Xuan,et al.  A data-driven approach based on long short-term memory and hidden Markov model for crack propagation prediction , 2020 .

[29]  Jorge de Brito,et al.  Effect of magnetized mixing water on the fresh and hardened state properties of steel fibre reinforced self-compacting concrete , 2020 .

[30]  Anikender Kumar,et al.  Prediction of air quality in Tehran by developing the nonlinear ensemble model , 2020 .

[31]  W. Zatar,et al.  Mixture Design Study of Fiber-Reinforced Self-Compacting Concrete for Prefabricated Street Light Post Structures , 2020 .

[32]  Arash Karimipour,et al.  The effect of polypropylene fibres on the compressive strength, impact and heat resistance of self-compacting concrete , 2020 .

[33]  H. Tran-Ngoc,et al.  Improved ANN technique combined with Jaya algorithm for crack identification in plates using XIGA and experimental analysis , 2020, Theoretical and Applied Fracture Mechanics.

[34]  A. Zeyad.  Effect of fibers types on fresh properties and flexural toughness of self-compacting concrete , 2020 .

[35]  T. Rabczuk,et al.  Computational predictions for estimating the maximum deflection of reinforced concrete panels subjected to the blast load , 2020 .

[36]  Ahmad Fauzi Ismail,et al.  Gene expression programming for process parameter optimization during ultrafiltration of surfactant wastewater using hydrophilic polyethersulfone membrane. , 2020, Journal of environmental management.

[37]  A. Shishegaran,et al.  Developing conductive concrete containing wire rope and steel powder wastes for route deicing , 2020 .

[38]  Timon Rabczuk,et al.  An Energy Approach to the Solution of Partial Differential Equations in Computational Mechanics via Machine Learning: Concepts, Implementation and Applications , 2019, Computer Methods in Applied Mechanics and Engineering.

[39]  T. Rabczuk,et al.  A Deep Collocation Method for the Bending Analysis of Kirchhoff Plate , 2021, Computers, Materials & Continua.

[40]  H. Tran-Ngoc,et al.  An efficient artificial neural network for damage detection in bridges and beam-like structures by improving training parameters using cuckoo search algorithm , 2019, Engineering Structures.

[41]  M. Ghasemi,et al.  Performance of a novel bent-up bars system not interacting with concrete , 2019, Frontiers of Structural and Civil Engineering.

[42]  R. N. Mohamed,et al.  Effect of steel fibers on self-compacting concrete slump flow and compressive strength , 2019, IOP Conference Series: Materials Science and Engineering.

[43]  Qianjun Xu,et al.  Effect of moisture content and porosity on compressive strength of concrete during drying at 105 °C , 2019, Construction and Building Materials.

[44]  Ataollah Shirzadi,et al.  Development of 48-hour Precipitation Forecasting Model using Nonlinear Autoregressive Neural Network , 2019, Lecture Notes in Civil Engineering.

[45]  Binh Thai Pham,et al.  A Possibility of AI Application on Mode-choice Prediction of Transport Users in Hanoi , 2019, Lecture Notes in Civil Engineering.

[46]  Binh Thai Pham,et al.  Development of Artificial Neural Networks for Prediction of Compression Coefficient of Soft Soil , 2019, Lecture Notes in Civil Engineering.

[47]  Naif Alajlan,et al.  Artificial Neural Network Methods for the Solution of Second Order Boundary Value Problems , 2019, Computers, Materials & Continua.

[48]  S. Nejadi,et al.  Analytical review of the mix design of fiber reinforced high strength self-compacting concrete , 2018, Journal of Building Engineering.

[49]  Anna Veronika Dorogush,et al.  CatBoost: gradient boosting with categorical features support , 2018, ArXiv.

[50]  A. Sezer,et al.  Mechanical properties of lime-treated clay reinforced with different types of randomly distributed fibers , 2018, Arabian Journal of Geosciences.

[51]  Z. Shui,et al.  A novel Self-Compacting Ultra-High Performance Fibre Reinforced Concrete (SCUHPFRC) derived from compounded high-active powders , 2018 .

[52]  P. Anjaneyulu,et al.  A Study on Effect of Steel Fiber in Fly Ash Based Self-Compacting Concrete , 2018 .

[53]  L. V. Prasad Meesaraganda,et al.  Artificial Neural Network for Strength Prediction of Fibers' Self-compacting Concrete , 2018, SocProS.

[54]  Tie-Yan Liu,et al.  LightGBM: A Highly Efficient Gradient Boosting Decision Tree , 2017, NIPS.

[55]  Ankur C. Bhogayata,et al.  Fresh and strength properties of concrete reinforced with metalized plastic waste fibers , 2017 .

[56]  Mohsen Khatibinia,et al.  Experimental observations and SVM-based prediction of properties of polypropylene fibres reinforced self-compacting composites incorporating nano-CuO , 2017 .

[57]  P. Saha,et al.  Predicting strength of SCC using artificial neural network and multivariable regression analysis , 2017 .

[58]  A. Zeyad,et al.  Influence of Fly Ash on the Properties of Self-Compacting Fiber Reinforced Concrete , 2017 .

[59]  Hamoon Fathi,et al.  Simultaneous effects of fiber and glass on the mechanical properties of self-compacting concrete , 2017 .

[60]  S. Fallah,et al.  Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume , 2017 .

[61]  Tie-Yan Liu,et al.  A Highly Efficient Gradient Boosting Decision Tree , 2017, NIPS 2017.

[62]  S. Yehia,et al.  Mechanical and durability evaluation of fiber-reinforced self-compacting concrete , 2016 .

[63]  Saman Soleimani Kutanaei,et al.  Prediction and modeling of mechanical properties in fiber reinforced self-compacting concrete using particle swarm optimization algorithm and artificial neural network , 2016 .

[64]  Tianqi Chen,et al.  XGBoost: A Scalable Tree Boosting System , 2016, KDD.

[65]  Rahmat Madandoust,et al.  Assessment of factors influencing mechanical properties of steel fiber reinforced self-compacting concrete , 2015 .

[66]  B. Mohammed,et al.  Strength reduction factors for structural rubbercrete , 2014 .

[67]  O. Kayali,et al.  Influence of fibre type on flexural behaviour of self-compacting fibre reinforced cementitious composites , 2014 .

[68]  Saman Soleimani Kutanaei,et al.  Prediction of combined effects of fibers and nanosilica on the mechanical properties of self-compacting concrete using artificial neural network , 2014 .

[69]  K. Khayat,et al.  Mixture Design and Testing of Fiber-Reinforced Self‑Consolidating Concrete , 2014 .

[70]  Iman M. Nikbin,et al.  An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete , 2013 .

[71]  O. L. Omran,et al.  Estimation of compressive strength of self-compacted concrete with fibers consisting nano-SiO2 using ultrasonic pulse velocity , 2013 .

[72]  K. Gnana Sheela,et al.  Review on Methods to Fix Number of Hidden Neurons in Neural Networks , 2013 .

[73]  Witold Brostow,et al.  Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete , 2013 .

[74]  Harun Tanyildizi,et al.  Estimation of compressive strength of self compacting concrete containing polypropylene fiber and mineral additives exposed to high temperature using artificial neural network , 2012 .

[75]  Xudong Chen,et al.  Influence of free water content on the compressive mechanical behaviour of cement mortar under high strain rate , 2011 .

[76]  J. Aguiar,et al.  Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature , 2011 .

[77]  Somnath Ghosh,et al.  Fiber Reinforced Self Compacting Concrete , 2011 .

[78]  Witold Brostow,et al.  Workability and Mechanical Performance of Steel Fiber-Reinforced Self-Compacting Concrete with Fly Ash , 2011 .

[79]  S. Akyuz,et al.  An experimental study on optimum usage of GGBS for the compressive strength of concrete , 2007 .

[80]  M. Mouret,et al.  Mechanical behaviour of self-compacting concrete with hybrid fibre reinforcement , 2007 .

[81]  Hiroshi Mutsuyoshi,et al.  Prediction of shear strength of steel fiber RC beams using neural networks , 2006 .

[82]  M. Şahmaran,et al.  Workability of hybrid fiber reinforced self-compacting concrete , 2005 .

[83]  S. Akyuz,et al.  An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete , 2005 .

[84]  Leo Breiman,et al.  Random Forests , 2001, Machine Learning.

[85]  Yixian Yang,et al.  Bounds on the number of hidden neurons in three-layer binary neural networks , 2003, Neural Networks.

[86]  Hajime Okamura,et al.  Self-Compacting High Performance Concrete , 1996 .

[87]  Bernard Widrow,et al.  The basic ideas in neural networks , 1994, CACM.

[88]  Wilfrid S. Kendall,et al.  Networks and Chaos - Statistical and Probabilistic Aspects , 1993 .

[89]  George Cybenko,et al.  Approximation by superpositions of a sigmoidal function , 1989, Math. Control. Signals Syst..

[90]  D. G. Bounds,et al.  A multilayer perceptron network for the diagnosis of low back pain , 1988, IEEE 1988 International Conference on Neural Networks.