Effect of regeneration method and ash deposition on diesel particulate filter performance: a review

[1]  Shuwan Cui,et al.  Utilization of renewable and sustainable diesel/methanol/n-butanol (DMB) blends for reducing the engine emissions in a diesel engine with different pre-injection strategies , 2023, Energy.

[2]  J. E,et al.  A comprehensive review on combustion stabilization technologies of micro/meso-scale combustors for micro thermophotovoltaic systems: Thermal, emission, and energy conversion , 2023, Fuel.

[3]  Dongli Tan,et al.  Diesel particulate filter regeneration mechanism of modern automobile engines and methods of reducing PM emissions: a review , 2023, Environmental Science and Pollution Research.

[4]  P. Tan,et al.  Effect of catalyzed diesel particulate filter and its catalyst loading on emission characteristics of a non-road diesel engine. , 2022, Journal of environmental sciences.

[5]  Feng Zhang,et al.  Investigation on harvesting characteristics of convective wind energy from vehicle driving on multi-lane highway , 2022, Energy.

[6]  J. E,et al.  Effects of porosity setting and multilayers of diesel particulate filter on the improvement of regeneration performance , 2022, Energy.

[7]  Yanhui Chen,et al.  Performance optimization of a diesel engine fueled with hydrogen/biodiesel with water addition based on the response surface methodology , 2022, Energy.

[8]  N. Cavina,et al.  Performance assessment of a predictive pre-heating strategy for a hybrid electric vehicle equipped with an electrically heated catalyst , 2022, Applied Thermal Engineering.

[9]  J. Lv,et al.  The development of diesel oxidation catalysts and the effect of sulfur dioxide on catalysts of metal-based diesel oxidation catalysts: A review , 2022, Fuel Processing Technology.

[10]  R. Dong,et al.  Investigation on combustion, performance and emission characteristics of a diesel engine fueled with diesel/alcohol/n-butanol blended fuels , 2022, Fuel.

[11]  Zhiqing Zhang,et al.  Review of Particle Filters for Internal Combustion Engines , 2022, Processes.

[12]  Yi-xi Cai,et al.  Effect of temperature control conditions on DPF regeneration by nonthermal plasma. , 2022, Chemosphere.

[13]  Yuanxing Huang,et al.  Investigation on the combustion and emission characteristics of diesel engine fueled with diesel/methanol/n-butanol blends , 2022, Fuel.

[14]  Jianbing Gao,et al.  Catalytic effect of diesel PM derived ash on PM oxidation activity. , 2022, Chemosphere.

[15]  R. Dong,et al.  Performance, combustion and emission characteristics investigations on a diesel engine fueled with diesel/ ethanol /n-butanol blends , 2022, Energy.

[16]  Dan Zhao,et al.  Characterizing modal exponential growth behaviors of self-excited transverse and longitudinal thermoacoustic instabilities , 2022, Physics of Fluids.

[17]  Wei Wang,et al.  Investigation on gas and particle emission characterization of carbon black oxidation process promoted by catalyst/ash , 2022, Chemical Engineering Journal.

[18]  R. Maurya,et al.  A review on morphology, nanostructure, chemical composition, and number concentration of diesel particulate emissions , 2022, Environmental Science and Pollution Research.

[19]  M. Siddiqui,et al.  Biosynthesized Silver Nanoparticles Decorated Electro-Membrane Flow Reactor an Effective Tool for the Desulfurization of Fuels , 2022, Arabian Journal for Science and Engineering.

[20]  S. You,et al.  Degradation of contaminants in plasma technology: An overview , 2021, Journal of Hazardous Materials.

[21]  OUP accepted manuscript , 2022, International Journal of Low-Carbon Technologies.

[22]  Yunhao Zhong,et al.  The effects of Mn-based catalysts on the selective catalytic reduction of NOx with NH3 at low temperature: A review , 2022, Fuel Processing Technology.

[23]  Yunxi Shi,et al.  Evolution of particulate matter deposited in the DPF channel during low-temperature regeneration by non-thermal plasma , 2022, Fuel.

[24]  F. Inambao,et al.  Evaluation of biodiesel on speciated PM2.5, organic compound, ultrafine particle and gaseous emissions from a low-speed EPA Tier II marine diesel engine coupled with DPF, DEP and SCR filter at various loads , 2022 .

[25]  D. Che,et al.  Impacts of catalyst coating on the filtration performance of catalyzed wall-flow filters: From the viewpoint of microstructure , 2021, Separation and Purification Technology.

[26]  Yunxi Shi,et al.  Effects of removing carbon particles of different size with nonthermal plasma generated by packed-bed dielectric barrier discharge reactor , 2021, Chemical Engineering Science.

[27]  Banglin Deng,et al.  Energy flow behavior and emission reduction of a turbo-charging and EGR non-road diesel engine equipped with DOC and DPF under NRTC (non-road transient cycle) , 2021 .

[28]  Fuwu Yan,et al.  Experimental investigation on emission characteristics of non-road diesel engine equipped with integrated DOC + CDPF + SCR aftertreatment , 2021 .

[29]  Jie Wang,et al.  Effects of Different Biodiesel-Diesel Blend Fuel on Combustion and Emission Characteristics of a Diesel Engine , 2021, Processes.

[30]  J. Gong,et al.  Research on Influence of Exhaust Characteristics and Control Strategy to DOC-Assisted Active Regeneration of DPF , 2021, Processes.

[31]  L. Nossova,et al.  Evaluation of a Catalyzed Diesel Particulate Filter Coated by a Novel Silver-Based Catalyst Using Mining Diesel Engines , 2021, Emission Control Science and Technology.

[32]  Yuze Sun,et al.  Evaluation of NO emissions characteristics in a CO2-Free micro-power system by implementing a perforated plate , 2021, Renewable and Sustainable Energy Reviews.

[33]  Benjamin Lawler,et al.  LTC performance of C1–C4 water-alcohol blends with the same cooling potential , 2021 .

[34]  H. Caliskan,et al.  Effects of cordierite particulate filters on diesel engine exhaust emissions in terms of pollution prevention approaches for better environmental management. , 2021, Journal of environmental management.

[35]  F. Martinović,et al.  Aftertreatment Technologies for Diesel Engines: An Overview of the Combined Systems , 2021, Catalysts.

[36]  Somesh P. Roy,et al.  The coalescence of incipient soot clusters , 2021, Carbon.

[37]  A. H. Isfahani,et al.  Effects of Fe2O3 and Al2O3 nanoparticle-diesel fuel blends on the combustion, performance and emission characteristics of a diesel engine , 2021, Clean Technologies and Environmental Policy.

[38]  Daniela Firoiu,et al.  Assessing the Sustainable Development and Renewable Energy Sources Relationship in EU Countries , 2021, Energies.

[39]  P. Sun,et al.  Effects of iron-based fuel borne catalyst addition on combustion, in-cylinder soot distribution and exhaust emission characteristics in a common-rail diesel engine , 2021, Fuel.

[40]  Jianbin Luo,et al.  The effects of Fe2O3 based DOC and SCR catalyst on the combustion and emission characteristics of a diesel engine fueled with biodiesel , 2021 .

[41]  Dheeraj B. Gosala,et al.  Exhaust valve profile modulation for improved diesel engine curb idle aftertreatment thermal management , 2021, International Journal of Engine Research.

[42]  P. Tan,et al.  Impacts of lubricating oil and its formulations on diesel engine particle characteristics , 2021 .

[43]  Vibhu Sharma,et al.  Chemical and physical properties of tribofilms formed by the interaction of ashless dithiophosphate anti‐wear additives , 2021, Lubrication Science.

[44]  Dongjian Zeng,et al.  Exhaust temperature control for safe and efficient thermal regeneration of diesel particulate filter , 2021 .

[45]  P. K. Patra,et al.  Recent trends in the analysis of trace elements in the field of environmental research: A review , 2021, Microchemical Journal.

[46]  Benjamin Lawler,et al.  A comprehensive experimental investigation of low-temperature combustion with thick thermal barrier coatings , 2021 .

[47]  J. Gong,et al.  NO2 catalytic formation, consumption, and efflux in various types of diesel particulate filter , 2021, Environmental Science and Pollution Research.

[48]  Dan Zhao,et al.  Mitigating NOx emissions from an ammonia-fueled micro-power system with a perforated plate implemented. , 2021, Journal of hazardous materials.

[49]  Qing-song Zuo,et al.  Investigations on the soot combustion performance enhancement of an improved catalytic gasoline particulate filter regeneration system under different electric heating powers , 2021 .

[50]  Feng Zhang,et al.  A review of studies using hydrocarbon adsorption material for reducing hydrocarbon emissions from cold start of gasoline engine , 2021 .

[51]  Vibhu Sharma,et al.  Multiscale characterization of exhaust and crankcase soot extracted from heavy-duty diesel engine and implications for DPF ash , 2020 .

[52]  Yuze Sun,et al.  NO emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system , 2020, Chemical Engineering Journal.

[53]  Xiaohuan Zhao,et al.  Numerical simulation study on soot continuous regeneration combustion model of diesel particulate filter under exhaust gas heavy load , 2020 .

[54]  N. Duić,et al.  Recent progress in sustainable energy-efficient technologies and environmental impacts on energy systems , 2020 .

[55]  V. Di Sarli,et al.  The Issue of Soot-Catalyst Contact in Regeneration of Catalytic Diesel Particulate Filters: A Critical Review , 2020, Catalysts.

[56]  Hu Li,et al.  A review on regulations, current status, effects and reduction strategies of emissions for marine diesel engines , 2020 .

[57]  A. Chmielewski,et al.  Removal of high concentrations of NOx and SO2 from diesel off-gases using a hybrid electron beam technology , 2020 .

[58]  Y. Rybarczyk,et al.  Seasonal variations in PM10 inorganic composition in the Andean city , 2020, Scientific Reports.

[59]  Yuesen Wang,et al.  Experimental study of impact of lubricant-derived ash on oxidation reactivity of soot generated in diesel engines , 2020 .

[60]  V. Palma,et al.  Experimental characterization of ultrafine particle emissions from a light-duty diesel engine equipped with a standard DPF , 2020 .

[61]  Bin Wang,et al.  Experimental Research on Exhaust Thermal Management Control Strategy for Diesel Particular Filter Active Regeneration , 2020, International Journal of Automotive Technology.

[62]  S. Erdoğan,et al.  Performance, emission and combustion characteristic assessment of biodiesels derived from beef bone marrow in a diesel generator , 2020 .

[63]  J. E,et al.  Effects analysis on soot combustion performance enhancement in a rotary diesel particulate filter unit during continuous microwave heating , 2020 .

[64]  D. Lou,et al.  Experimental study on the temperature characteristics of a diesel particulate filter during a drop to idle active regeneration process , 2020 .

[65]  Yuqiang Li,et al.  Numerical Study on Effects of Key Factors on Performance of CeO2-based Catalyzed Diesel Particulate Filter , 2020, Journal of Thermal Science.

[66]  Qing-song Zuo,et al.  Endpoint forecast of different diesel-biodiesel soot filtration process in diesel particulate filters considering ash deposition , 2020 .

[67]  Bingxi Li,et al.  Simulation of microwave-assisted gasification of biomass: A review , 2020 .

[68]  Yuqiang Li,et al.  Effects of iron-based fuel borne catalyst addition on microstructure, element composition and oxidation activity of diesel exhaust particles , 2020 .

[69]  Xiurong Guo,et al.  Diesel exhaust treatment by a combination of non‐thermal plasma with Nano‐CeO2 supported on the wood fiber filter , 2020, Environmental Progress & Sustainable Energy.

[70]  P. Sun,et al.  Experimental Study on Soot Oxidation Characteristics of Diesel Engine with Ce-Based Fuel-Borne Catalyst Fuel , 2020, Journal of Energy Engineering.

[71]  S. Shi,et al.  High efficiency pyrolysis of used cigarette filters for ester-rich bio-oil through microwave-assisted heating , 2020, Journal of Cleaner Production.

[72]  He Lin,et al.  Accelerated ash accumulation method for diesel particulate filter and its characterization: a review , 2020 .

[73]  B. Li,et al.  Numerical study on flow and pressure drop characteristics of a novel type asymmetric wall-flow diesel particulate filter , 2020 .

[74]  Yuheng Du,et al.  Effects of ash composition and ash stack heights on soot deposition and oxidation processes in catalytic diesel particulate filter , 2020 .

[75]  Menglin Chen,et al.  Study on the Performance of NTP with Wood Fiber in NO Removal , 2020, Plasma Chemistry and Plasma Processing.

[76]  Todd J. Toops,et al.  The origin, transport, and evolution of ash in engine particulate filters , 2020 .

[77]  Caneon Kurien,et al.  Soot deposition effects and microwave regeneration modelling of diesel particulate filtration system , 2020 .

[78]  P. Sun,et al.  An experimental-computational study of DPF soot capture and heat regeneration , 2020 .

[79]  Hongming Xu,et al.  An experimental study on particle evolution in the exhaust gas of a direct injection SI engine , 2020 .

[80]  Zihan Qin,et al.  Particle emission characteristics of DPF regeneration from DPF regeneration bench and diesel engine bench measurements , 2020 .

[81]  Zhenpo Wang,et al.  Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects. , 2020, Chemical reviews.

[82]  A. Jafarian,et al.  Numerical simulation of turbulent oscillating flow in porous media , 2020 .

[83]  Anren Yao,et al.  Selective catalytic reduction of nitrogen oxides with methanol over the (cobalt-molybdenum)/alumina dual catalysts under the diesel methanol dual fuel exhaust conditions , 2020 .

[84]  J. E,et al.  Effects analysis on diesel soot continuous regeneration performance of a rotary microwave-assisted regeneration diesel particulate filter , 2020 .

[85]  Yun-xi Shi,et al.  Effects of nonthermal plasma on microstructure and oxidation characteristics of particulate matter. , 2020, Environmental science & technology.

[86]  Ming Zhao,et al.  Preparation of Reduced Pt-Based Catalysts with High Dispersion and Their Catalytic Performances for NO Oxidation , 2020, Acta Physico Chimica Sinica.

[87]  J. E,et al.  A review on heat enhancement in thermal energy conversion and management using Field Synergy Principle , 2020 .

[88]  Zihan Qin,et al.  The interaction effect of catalyst and ash on diesel soot oxidation by thermogravimetric analysis , 2019 .

[89]  Kexiang Wei,et al.  Effects analysis on optimal microwave energy consumption in the heating process of composite regeneration for the diesel particulate filter , 2019, Applied Energy.

[90]  J. Gong,et al.  Low temperature, medium temperature and high temperature performance of the continuous regenerative diesel particulate filter assisted by electric regeneration , 2019, Chemical Engineering Science.

[91]  Seongjun Lee,et al.  Experimental study on fundamental effect of H2 for catalytic soot oxidation with Pt/CeO2 using a flow reactor system , 2019, Journal of the Energy Institute.

[92]  S. Shuai,et al.  Experimental study of lubricant-derived ash effects on diesel particulate filter performance , 2019, International Journal of Engine Research.

[93]  G. Tian,et al.  On the emission reduction through the application of an electrically heated catalyst to a diesel vehicle , 2019, Energy Science & Engineering.

[94]  Yu Wang,et al.  Soot formation in laminar counterflow flames , 2019, Progress in Energy and Combustion Science.

[95]  D. Fino,et al.  Heterogeneous mechanism of NOx-assisted soot oxidation in the passive regeneration of a bench-scale diesel particulate filter catalyzed with nanostructured equimolar ceria-praseodymia , 2019, Applied Catalysis A: General.

[96]  Jinyoung Jang,et al.  NO, NO2 and N2O emissions over a SCR using DOC and DPF systems with Pt reduction , 2019, Chemical Engineering Journal.

[97]  Q. Liang,et al.  Pollution, demographic, and public willingness to participate in environment protection in China—a study based on micro-survey data , 2019, Environmental Science and Pollution Research.

[98]  E. Gutmark,et al.  Mitigating self-excited flame pulsating and thermoacoustic oscillations using perforated liners. , 2019, Science bulletin.

[99]  Dan Zhao,et al.  Characterizing hydrogen-fuelled pulsating combustion on thermodynamic properties of a combustor , 2019, Communications Physics.

[100]  Chenxu Jiang,et al.  Optimizing gasoline compression ignition engine performance and emissions: Combined effects of exhaust gas recirculation and fuel octane number , 2019, Applied Thermal Engineering.

[101]  David C Quiros,et al.  Real-time particulate emissions rates from active and passive heavy-duty diesel particulate filter regeneration. , 2019, The Science of the total environment.

[102]  P. Aswath,et al.  Impact of Diesel Engine Oil Additives–Soot Interactions on Physiochemical, Oxidation, and Wear Characteristics of Soot , 2019, Energy & Fuels.

[103]  Xiurong Guo,et al.  Performance study about a new kind wood fiber filter element utilized in capturing diesel particulate material , 2019, Journal of Wood Science.

[104]  Yi-xi Cai,et al.  Characterization of soot inside a diesel particulate filter during a nonthermal plasma promoted regeneration step , 2019, Applied Thermal Engineering.

[105]  I. Uflyand,et al.  Metal-containing nanomaterials as lubricant additives: State-of-the-art and future development , 2019, Friction.

[106]  E Jiaqiang,et al.  Performance enhancement of microwave assisted regeneration in a wall-flow diesel particulate filter based on field synergy theory , 2019, Energy.

[107]  G. Chase,et al.  The effect of operating parameters on regeneration characteristics and particulate emission characteristics of diesel particulate filters , 2019, Applied Thermal Engineering.

[108]  Hongtao Xu,et al.  Experimental study of the selective catalytic reduction after-treatment for the exhaust emission of a diesel engine , 2019, Applied Thermal Engineering.

[109]  D. Sarigiannis,et al.  Morphological and chemical composition of particulate matter in buses exhaust , 2018, Toxicology reports.

[110]  Changsheng Su,et al.  Structured glass catalytic coating on wire mesh for particulate matter (PM) removal by modified sol-gel processing , 2019, Materials Letters.

[111]  Yunshan Ge,et al.  Ash deposited in diesel particular filter: a review , 2018, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[112]  Yu Li,et al.  Recirculation zone characteristics research on a sudden expansion swirl burner for DPF regeneration , 2018 .

[113]  S. Shuai,et al.  Quantitative estimation of the impact of ash accumulation on diesel particulate filter related fuel penalty for a typical modern on-road heavy-duty diesel engine , 2018, Applied Energy.

[114]  Zhen Huang,et al.  Catalytic combustion of soot over Cu, Mn substitution CeZrO2- nanocomposites catalysts prepared by self-propagating high-temperature synthesis method , 2018, Chemical Engineering Science.

[115]  P. Sun,et al.  Experimental investigation of in-cylinder soot distribution and exhaust particle oxidation characteristics of a diesel engine with nano-CeO2 catalytic fuel , 2018, Energy.

[116]  Yunshan Ge,et al.  The effects of ash inside a platinum-based catalyst diesel particulate filter on particle emissions, gaseous emissions, and unregulated emissions , 2018, Environmental Science and Pollution Research.

[117]  A. Hoang,et al.  A review on deposit formation in the injector of diesel engines running on biodiesel , 2018, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[118]  Yi-xi Cai,et al.  Effects of Residual Ash on Dpf Capture and Regeneration , 2018, International Journal of Automotive Technology.

[119]  Gui-hua Wang,et al.  Influence of the idle-up strategy on the thermal management of diesel particulate filter regeneration during a drop to the idle process , 2018, Applied Thermal Engineering.

[120]  D. Massabò,et al.  Trace Metals in Soot and PM2.5 from Heavy-Fuel-Oil Combustion in a Marine Engine , 2018, Environmental science & technology.

[121]  David C Quiros,et al.  Emissions During and Real-world Frequency of Heavy-duty Diesel Particulate Filter Regeneration. , 2018, Environmental science & technology.

[122]  Jing Wang,et al.  Carbon Deposit Incineration During Engine Flameout Using Non-Thermal Plasma Injection , 2018 .

[123]  T. Watling.  A One-Dimensional Model for Square and Octo-Square Asymmetric Particulate Filters with Correct Description of the Channel and Wall Geometry , 2018 .

[124]  E Jiaqiang,et al.  Performance enhancement of a baffle-cut heat exchanger of exhaust gas recirculation , 2018 .

[125]  P. Tan,et al.  Exhaust particle properties from a light duty diesel engine using different ash content lubricating oil , 2018 .

[126]  M. Lapuerta,et al.  Interaction of diesel engine soot with NO2 and O2 at diesel exhaust conditions. Effect of fuel and engine operation mode , 2018 .

[127]  Jing Wang,et al.  Diesel particulate filter (DPF) regeneration using non-thermal plasma induced by dielectric barrier discharge , 2017, Journal of the Energy Institute.

[128]  John H. Johnson,et al.  An Experimental Investigation into the Effect of NO2 and Temperature on the Passive Oxidation and Active Regeneration of Particulate Matter in a Diesel Particulate Filter , 2018, Emission Control Science and Technology.

[129]  P. Senthilkumar,et al.  Particulate matter formation and its control methodologies for diesel engine: A comprehensive review , 2017 .

[130]  V. Palma,et al.  Optimized microwave susceptible catalytic diesel soot trap , 2017 .

[131]  M. A. Costagliola,et al.  How Much Regeneration Events Influence Particle Emissions of DPF-Equipped Vehicles? , 2017 .

[132]  G. Chase,et al.  The influence of ash on soot deposition and regeneration processes in diesel particular filter , 2017 .

[133]  E Jiaqiang,et al.  Investigations on the temperature distribution of the diesel particulate filter in the thermal regeneration process and its field synergy analysis , 2017 .

[134]  Yunxi Shi,et al.  Effect of indirect non-thermal plasma on particle size distribution and composition of diesel engine particles , 2017 .

[135]  E Jiaqiang,et al.  Influence of structural and operating factors on performance degradation of the diesel particulate filter based on composite regeneration , 2017 .

[136]  Gui-hua Wang,et al.  Influence of active control strategies on exhaust thermal management for diesel particular filter active regeneration , 2017 .

[137]  Jing Wang,et al.  Experimental Study on Purification of Diesel Particulate Matter by Non-thermal Plasma Technology , 2017, Plasma Chemistry and Plasma Processing.

[138]  K. Iwasaki.  Catalyst Performance of Monolith-Type Diesel Particulate Filter having Microgear-Design based on Asymmetric Hexagonal Channel Geometry , 2017 .

[139]  Li Jun,et al.  Research on particulate filter simulation and regeneration control strategy , 2017 .

[140]  Jianbing Gao,et al.  Nanostructure analysis of particulate matter emitted from a diesel engine equipped with a NTP reactor , 2017 .

[141]  S. Mir,et al.  Exhaust gases depletion using non-thermal plasma (NTP) , 2017 .

[142]  Hiroyuki Yamada,et al.  Mechanisms of Increased Particle and VOC Emissions during DPF Active Regeneration and Practical Emissions Considering Regeneration. , 2017, Environmental science & technology.

[143]  Jing Wang,et al.  Influence of PM Size Distribution and Ingredients on DPF Regeneration by Non-thermal Plasma Technology , 2017, Plasma Chemistry and Plasma Processing.

[144]  A. García-García,et al.  Catalyzed Particulate Filter Regeneration by Platinum Versus Noble Metal-Free Catalysts: From Principles to Real Application , 2017, Topics in Catalysis.

[145]  A. Kotarba,et al.  Role of chain length of the capping agents of iron oxide based fuel borne catalysts in the enhancement of soot combustion activity , 2016 .

[146]  Seungmok Choi,et al.  Lube oil-dependent ash chemistry on soot oxidation reactivity in a gasoline direct-injection engine , 2016 .

[147]  Bin Zhang,et al.  Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process , 2016 .

[148]  Jia-qiang E,et al.  Endpoint forecasting on composite regeneration by coupling cerium-based additive and microwave for diesel particulate filter , 2016 .

[149]  V. Palma,et al.  Microwave assisted regeneration of a catalytic diesel soot trap , 2016 .

[150]  J. Y. Wira,et al.  Performance, emissions and lubricant oil analysis of diesel engine running on emulsion fuel , 2016 .

[151]  B. Rothen‐Rutishauser,et al.  Diesel exhaust: current knowledge of adverse effects and underlying cellular mechanisms , 2016, Archives of Toxicology.

[152]  S. Daido,et al.  Particulate Matter Oxidation over Ash-Deposited Catalyzed Diesel Particulate Filters , 2016, Topics in Catalysis.

[153]  Guihua Wang,et al.  Soot loading estimation model and passive regeneration characteristics of DPF system for heavy-duty engine , 2016 .

[154]  J. Gong,et al.  Analysis on filtration characteristic of wall-flow filter for ash deposition in cake , 2016 .

[155]  E Jiaqiang,et al.  Comprehensive analysis on influencing factors of composite regeneration performance of a diesel particulate filter , 2016 .

[156]  Sujay Bagi,et al.  Investigation into Ash from Field Returned DPF Units: Composition, Distribution, Cleaning Ability and DPF Performance Recovery , 2016 .

[157]  Sujay Bagi,et al.  Understanding Chemical Composition and Phase Transitions of Ash from Field Returned DPF Units and Their Correlation with Filter Operating Conditions , 2016 .

[158]  Yu Li,et al.  Failure recognition of the diesel particulate filter based on catastrophe theory , 2016 .

[159]  J. E,et al.  Numerical Simulation of Diesel Particulate Filter Regeneration Considering Ash Deposit , 2016, Flow, Turbulence and Combustion.

[160]  Yi Ma,et al.  Four kinds of the two-equation turbulence model's research on flow field simulation performance of DPF's porous media and swirl-type regeneration burner , 2016 .

[161]  W. Peng,et al.  Microstructure characterization of wood fiber pit adsorbing ultrafine particles emitted by diesel engine and simulation of its influence factors. , 2016 .

[162]  Ł. Jęczmionek,et al.  The evaluation of fuel borne catalyst (FBC’s) for DPF regeneration , 2015 .

[163]  B. M. Reddy,et al.  Rare earth metal doped CeO2-based catalytic materials for diesel soot oxidation at lower temperatures , 2015 .

[164]  A. Bueno-López,et al.  Catalytic regeneration of Diesel Particulate Filters: Comparison of Pt and CePr active phases , 2015 .

[165]  Dan Zhao,et al.  Prediction of stability behaviors of longitudinal and circumferential eigenmodes in a choked thermoacoustic combustor , 2015 .

[166]  Richard J. Brown,et al.  Performance evaluation of non-thermal plasma on particulate matter, ozone and CO2 correlation for diesel exhaust emission reduction , 2015 .

[167]  Jeffrey Naber,et al.  A review of the literature of selective catalytic reduction catalysts integrated into diesel particulate filters , 2015 .

[168]  Zhen Huang,et al.  Review of the state-of-the-art of exhaust particulate filter technology in internal combustion engines. , 2015, Journal of environmental management.

[169]  T. Johnson.  Review of Vehicular Emissions Trends , 2015 .

[170]  Kazuhiro Yamamoto,et al.  Simulation of continuously regenerating trap with catalyzed DPF , 2015 .

[171]  Xueliang Yuan,et al.  The development of new energy vehicles for a sustainable future: A review , 2015 .

[172]  Paolo Ciambelli,et al.  Catalytic DPF microwave assisted active regeneration , 2015 .

[173]  D. M. Zhang,et al.  Performance evaluation on field synergy and composite regeneration by coupling cerium-based additive and microwave for a diesel particulate filter , 2014 .

[174]  Seungmok Choi,et al.  The effects of filter porosity and flow conditions on soot deposition/oxidation and pressure drop in particulate filters , 2014 .

[175]  X. H. Li,et al.  Meachanism and method of DPF regeneration by oxygen radical generated by NTP technology , 2014 .

[176]  Yunshan Ge,et al.  Unregulated emissions from diesel engine with particulate filter using Fe-based fuel borne catalyst. , 2014, Journal of environmental sciences.

[177]  Mahmut Reyhanoglu,et al.  Feedback control of acoustic disturbance transient growth in triggering thermoacoustic instability , 2014 .

[178]  Edward Charles Fortner,et al.  Characterization of particulate matter emissions from on-road gasoline and diesel vehicles using a soot particle aerosol mass spectrometer , 2014 .

[179]  Pingen Chen,et al.  Air-fraction modeling for simultaneous Diesel engine NOx and PM emissions control during active DPF regenerations , 2014 .

[180]  Alexander Sappok,et al.  Direct Measurements of Soot/Ash Affinity in the Diesel Particulate Filter by Atomic Force Microscopy and Implications for Ash Accumulation and DPF Degradation , 2014 .

[181]  Tomoyuki Kuroki,et al.  Complete regeneration characteristics of diesel particulate filter using ozone injection , 2013 .

[182]  Dan Luss,et al.  Regeneration modes and peak temperatures in a diesel particulate filter , 2013 .

[183]  Alexander Sappok,et al.  The Sensitivity of DPF Performance to the Spatial Distribution of Ash Inside DPF Inlet Channels , 2013 .

[184]  Takumi Shibuta,et al.  Durability Investigation on Aluminum Titanate-Diesel Particulate Filter Having Asymmetric Hexagonal Cell Design , 2013 .

[185]  Teuvo Maunula,et al.  Intensification of Catalytic Aftertreatments Systems for Mobile Applications , 2013 .

[186]  Adam J. Kotrba,et al.  Passive Regeneration Response Characteristics of a DPF System , 2013 .

[187]  J. Wendt,et al.  Environmental implications of iron fuel borne catalysts and their effects on diesel particulate formation andcomposition , 2013 .

[188]  James A. Sullivan,et al.  Rare Earth (La, Nd, Pr) Doped Ceria Zirconia Solid Solutions for Soot Combustion , 2013, Topics in Catalysis.

[189]  M. Valencia,et al.  Evidences of the Cerium Oxide-Catalysed DPF Regeneration in a Real Diesel Engine Exhaust , 2013, Topics in Catalysis.

[190]  D. Luss,et al.  Inlet Cone Effect on Diesel Particulate Filter Regeneration upon a Rapid Shift to Idle , 2012 .

[191]  Thomas W Hesterberg,et al.  Evaluation of carcinogenic hazard of diesel engine exhaust needs to consider revolutionary changes in diesel technology. , 2012, Regulatory toxicology and pharmacology : RTP.

[192]  C. Beatrice,et al.  Detailed characterization of particulate emissions of an automotive catalyzed DPF using actual regeneration strategies , 2012 .

[193]  Corning,et al.  Vehicular Emissions in Review , 2012 .

[194]  A. Shah,et al.  Impacts of continuously regenerating trap and particle oxidation catalyst on the NO2 and particulate matter emissions emitted from diesel engine. , 2012, Journal of environmental sciences.

[195]  D. Schreiber,et al.  Investigation of diesel ash particulate matter: A scanning electron microscope and transmission electron microscope study , 2012 .

[196]  Dan Luss,et al.  Transient temperature rise during regeneration of diesel particulate filters , 2011 .

[197]  A. Agarwal,et al.  Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine , 2011 .

[198]  A. Tsolakis,et al.  Analysis of reformed EGR on the performance of a diesel particulate filter , 2011 .

[199]  U. Olofsson,et al.  Lubricant ash particles in diesel engine exhaust. Literature review and modelling study , 2011 .

[200]  Martyn V. Twigg,et al.  Catalytic control of emissions from cars , 2011 .

[201]  Letao Zhang,et al.  Synthesis of Environmentally Friendly Composite-Metal (Calcium and Magnesium) Oleate Detergent , 2011 .

[202]  V. Wong,et al.  Investigation of Ash Formation, Accumulation, and Distribution in Diesel Particulate Filters Using Lubricant Additive Tracers , 2011 .

[203]  Hai Wang.  Formation of nascent soot and other condensed-phase materials in flames , 2011 .

[204]  D. Luss,et al.  Temperature rise during stationary and dynamic regeneration of a diesel particulate filter , 2010 .

[205]  D. Lee,et al.  The enhancement of low-temperature combustion of diesel PM through concerted application of FBC and perovskite , 2010 .

[206]  Hyong Gon Kim,et al.  NO2-Assisted Soot Regeneration Behavior in a Diesel Particulate Filter with Heavy-Duty Diesel Exhaust Gases , 2010 .

[207]  P. D. Eggenschwiler,et al.  Characterization of particulate matter deposited in diesel particulate filters: Visual and analytical approach in macro-, micro- and nano-scales , 2010 .

[208]  M. Kubicek,et al.  Modelling of soot oxidation by NO2 in various types of diesel particulate filters , 2010 .

[209]  A. Heibel,et al.  Measurement and prediction of filtration efficiency evolution of soot loaded diesel particulate filters , 2010 .

[210]  Sherry Zhang,et al.  Emissions from a diesel car during regeneration of an active diesel particulate filter , 2010 .

[211]  K. Nickel,et al.  Mechanisms and orientation dependence of the corrosion of single crystal Cordierite by model diesel particulate ashes , 2010 .

[212]  Jan Czerwinski,et al.  Metal-Oxide Particles in Combustion Engine Exhaust , 2010 .

[213]  T. Chan,et al.  Experimental investigation on regulated and unregulated emissions of a diesel/methanol compound combustion engine with and without diesel oxidation catalyst. , 2010, The Science of the total environment.

[214]  Toshitaka Ishizawa,et al.  Investigation into Ash Loading and Its Relationship to DPF Regeneration Method , 2009 .

[215]  M. Cha,et al.  Active Regenerative DPF Using a Plasma Assisted Burner , 2009 .

[216]  V. Wong,et al.  Characteristics and Effects of Ash Accumulation on Diesel Particulate Filter Performance: Rapidly Aged and Field Aged Results , 2009 .

[217]  Gary D. Maupin,et al.  Single wall diesel particulate filter (DPF) filtration efficiency studies using laboratory generated particles , 2009 .

[218]  T. Ho,et al.  Active Regeneration of Diesel Particulate Filter Employing Microwave Heating , 2009 .

[219]  Alexander Sappok,et al.  Lubricant-Derived Ash Properties and Their Effects on Diesel Particulate Filter Pressure-Drop Performance , 2009 .

[220]  Kristian Miller Bodek,et al.  The Effects of Sulfated Ash, Phosphorus and Sulfur on Diesel Aftertreatment Systems - A Review , 2007 .

[221]  V. Wong,et al.  Detailed Chemical and Physical Characterization of Ash Species in Diesel Exhaust Entering Aftertreatment Systems , 2007 .

[222]  M. Okubo,et al.  Carbon particulate matter incineration in diesel engine emissions using indirect nonthermal plasma processing , 2007 .

[223]  Pasi Juvonen,et al.  Catalyzed Particulate Filters for Mobile Diesel Applications , 2007 .

[224]  Magdi K. Khair,et al.  Diesel Emissions and Their COntrol , 2006 .

[225]  H. Burtscher.  Physical characterization of particulate emissions from diesel engines: a review , 2005 .

[226]  Paul Wouters,et al.  Improvement and Simplification of DPF System Using a Ceria-based Fuel-borne Catalyst for Diesel Particulate Filter Regeneration in Serial Applications , 2004 .

[227]  Michael Frenklach,et al.  Reaction mechanism of soot formation in flames , 2002 .

[228]  B. Cooper,et al.  Optimising the Low Temperature Performance and Regeneration Efficiency of the Continuously Regenerat , 2002 .

[229]  Guy Richard Chandler,et al.  An Integrated SCR and Continuously Regenerating Trap System to Meet Future NOx and PM Legislation , 2000 .

[230]  J. E,et al.  Mechanism, performance and modification methods for NH3-SCR catalysts: A review , 2022, Fuel.