A microchip electrophoresis system with integrated in‐plane electrodes for contactless conductivity detection

We present a new approach for contactless conductivity detection for microchip‐based capillary electrophoresis (CE). The detector integrates easily with well‐known microfabrication techniques for glass‐based microfluidic devices. Platinum electrodes are structured in recesses in‐plane with the microchannel network after glass etching, which allows precise positioning and batch fabrication of the electrodes. A thin glass wall of 10–15 νm separates the electrodes and the buffer electrolyte in the separation channel to achieve the electrical insulation necessary for contactless operation. The effective separation length is 34 mm, with a channel width of 50 νm and depth of 12 νm. Microchip CE devices with conductivity detection were characterized in terms of sensitivity and linearity of response, and were tested using samples containing up to three small cations. The limit of detection for K+ (18 νM) is good, though an order of magnitude higher than for comparable capillary‐based systems and one recently reported example of contactless conductivity on chip. However, an integrated field‐amplified stacking step could be employed prior to CE to preconcentrate the sample ions by a factor of four.

[1]  Kaniansky,et al.  Capillary electrophoresis separations on a planar chip with the column-coupling configuration of the separation channels , 2000, Analytical chemistry.

[2]  Pierre Thibault,et al.  Rapid and sensitive separation of trace level protein digests using microfabricated devices coupled to a quadrupole ‐ time‐of‐flight mass spectrometer , 2000, Electrophoresis.

[3]  R. Mathies,et al.  Single-molecule detection of DNA separations in microfabricated capillary electrophoresis chips employing focused molecular streams. , 1999, Analytical chemistry.

[4]  D. Burgi,et al.  Application of sample stacking to gravity injection in capillary electrophoresis , 1991 .

[5]  Andreas Manz,et al.  Holographic refractive index detector for application in microchip-based separation systems , 1998 .

[6]  Andreas Neyer,et al.  A new PMMA-microchip device for isotachophoresis with integrated conductivity detector , 2001 .

[7]  E. Yeung,et al.  Determination of intracellular species at the level of a single erythrocyte via capillary electrophoresis with direct and indirect fluorescence detection. , 1992, Analytical chemistry.

[8]  Claudimir L do Lago,et al.  Contactless conductivity detection for capillary electrophoresis. Hardware improvements and optimization of the input-signal amplitude and frequency. , 2002, Journal of chromatography. A.

[9]  Jan Lichtenberg,et al.  Sample pretreatment on microfabricated devices. , 2002, Talanta.

[10]  C. Henry,et al.  Dual-electrode electrochemical detection for poly(dimethylsiloxane)-fabricated capillary electrophoresis microchips. , 2000, Analytical chemistry.

[11]  A. Manz,et al.  Micro total analysis systems. 2. Analytical standard operations and applications. , 2002, Analytical chemistry.

[12]  S. Jacobson,et al.  Microchip electrophoresis with sample stacking , 1995, Electrophoresis.

[13]  D. Burgi,et al.  Optimization in sample stacking for high-performance capillary electrophoresis , 1991 .

[14]  S. Jacobson,et al.  Determination of metal cations in microchip electrophoresis using on‐chip complexation and sample stacking , 1998 .

[15]  C. Henry,et al.  Conductivity detection for monitoring mixing reactions in microfluidic devices. , 2001, The Analyst.

[16]  Albert van den Berg,et al.  New approaches for fabrication of microfluidic capillary electrophoresis devices with on‐chip conductivity detection , 2001, Electrophoresis.

[17]  Claudimir Lucio do Lago,et al.  An Oscillometric Detector for Capillary Electrophoresis , 1998 .

[18]  Martin Pumera,et al.  Contactless conductivity detector for microchip capillary electrophoresis. , 2002, Analytical chemistry.

[19]  P. Fielden,et al.  Determination of metal cations on miniaturised planar polymeric separation devices using isotachophoresis with integrated conductivity detection. , 2001, The Analyst.

[20]  Bohuslav Gaš,et al.  High-frequency contactless conductivity detection in isotachophoresis , 1980 .

[21]  F. Everaerts,et al.  Determination of conjugated bile acids in human bile by isotachophoresis in a non-aqueous solvent using a.c. conductivity and UV detection. , 1983, Journal of chromatography.

[22]  Charles S Henry,et al.  The analysis of uric acid in urine using microchip capillary electrophoresis with electrochemical detection , 2002, Electrophoresis.

[23]  N F de Rooij,et al.  Sample preconcentration by field amplification stacking for microchip‐based capillary electrophoresis , 2001, Electrophoresis.

[24]  G. Bruin,et al.  Recent developments in electrokinetically driven analysis on microfabricated devices , 2000, Electrophoresis.

[25]  Michael J. Vellekoop,et al.  Design of an electronic interface for capacitively coupled four-electrode conductivity detection in capillary electrophoresis microchip , 2002 .

[26]  M. Schwarz,et al.  Recent developments in detection methods for microfabricated analytical devices. , 2001, Lab on a chip.

[27]  A. Zemann,et al.  Capillary electrophoresis and contactless conductivity detection of ions in narrow inner diameter capillaries. , 1999, Analytical chemistry.

[28]  S. Lunte,et al.  Microchip capillary electrophoresis/ electrochemistry , 2001, Electrophoresis.

[29]  A D Stroock,et al.  An integrated fluorescence detection system in poly(dimethylsiloxane) for microfluidic applications. , 2001, Analytical chemistry.

[30]  D. J. Harrison,et al.  Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices , 1999, Electrophoresis.

[31]  Shawn D. Llopis,et al.  Contact conductivity detection in poly(methyl methacrylate)-based microfluidic devices for analysis of mono- and polyanionic molecules. , 2002, Analytical chemistry.

[32]  A. Zemann,et al.  Contactless conductivity detection for capillary electrophoresis. , 1998, Analytical chemistry.

[33]  A. Zemann.  Conductivity detection in capillary electrophoresis , 2001 .

[34]  R. Chien,et al.  Electroosmotic properties and peak broadening in field-amplified capillary electrophoresis , 1991 .

[35]  D. J. Harrison,et al.  Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip , 1993, Science.

[36]  N F de Rooij,et al.  Electrokinetically driven microfluidic chips with surface-modified chambers for heterogeneous immunoassays. , 2001, Analytical chemistry.

[37]  Gregor Ocvirk,et al.  Optimization of confocal epifluorescence microscopy for microchip-based miniaturized total analysis systems , 1998 .

[38]  A. Manz,et al.  Micro total analysis systems. 1. Introduction, theory, and technology. , 2002, Analytical chemistry.

[39]  S. Jacobson,et al.  Counting single chromophore molecules for ultrasensitive analysis and separations on microchip devices. , 1998, Analytical chemistry.

[40]  L. Sarro,et al.  Capillary electrophoresis with on‐chip four‐electrode capacitively coupled conductivity detection for application in bioanalysis , 2001, Electrophoresis.

[41]  S. Jacobson,et al.  High-Speed Separations on a Microchip , 1994 .

[42]  J. Bastemeijer,et al.  Electronic protection methods for conductivity detectors in micro capillary electrophoresis devices , 2002 .

[43]  M. Masár,et al.  Contactless conductivity detection in capillary zone electrophoresis , 1999 .

[44]  G. Kovacs,et al.  Electrically floating conductivity detection system for capillary electrophoresis , 1998 .

[45]  Hans Peter Herzig,et al.  Performance of an integrated microoptical system for fluorescence detection in microfluidic systems. , 2002, Analytical chemistry.

[46]  A. Manz,et al.  Glass chips for high-speed capillary electrophoresis separations with submicrometer plate heights , 1993 .

[47]  J. Vacík,et al.  Improvement of the performance of a high-frequency contactless conductivity detector for isotachophoresis , 1985 .

[48]  C H Mastrangelo,et al.  Monolithic capillary electrophoresis device with integrated fluorescence detector. , 2001, Analytical chemistry.

[49]  J. A. Silva,et al.  Conductivity detection of aliphatic alcohols in micellar electrokinetic chromatography using an oscillometric detector. , 2000 .

[50]  P. Fielden,et al.  The simultaneous separation of twenty-one metal cations using capillary isotachophoresis with on-column conductivity detection , 1999 .

[51]  D. J. Harrison,et al.  Red diode laser induced fluorescence detection with a confocal microscope on a microchip for capillary electrophoresis. , 2000, Biosensors & bioelectronics.