3D numerical investigation of flow and heat transfer characteristics in smooth wavy fin-and-elliptical tube heat exchangers using new type vortex generators

3D computational analysis was performed to investigate heat transfer and pressure drop characteristics of flow in SWFET (Smooth Wavy Fin-and-Elliptical Tube) heat exchanger with four new VGs (vortex generators), RTW (rectangular trapezoidal winglet), ARW (angle rectangular winglet), CARW (curved angle rectangular winglet) and WW (Wheeler wishbone). The numerical model was well validated with the available experimental results. Numerical results illustrate that vortex generators can bring about further heat transfer enhancement through careful adjustment of the position with respect to the elliptical tube, type and attack angle of vortex generators. The influences of the geometrical factors including attack angles of the winglets (αVG = 15∘,30∘,45∘,60∘ and 75°) and width/length aspect ratio (w/l = 0.5,1.0) of the Wheeler wishbones on enhancing the heat transfer performance of a smooth wavy fin heat exchanger with a three-row staggered elliptical tube bundle are investigated. A parametric study on the winglet vortex generators indicated that for the small attack angle, CARW vortex generators gives better thermohydraulic performance under the present conditions. The best thermal performance with winglet VGs in larger attack angle, was obtained at RTW VGs arrangement. For the SWFET heat exchangers, the WW VGs with w/l = 0.5 provide the best heat transfer performance.

[1]  Felix Hueber,et al.  Principles Of Enhanced Heat Transfer , 2016 .

[2]  D. P. Sekulic,et al.  Fundamentals of Heat Exchanger Design , 2003 .

[3]  Min Zeng,et al.  Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns , 2009 .

[4]  Sang Yun Lee,et al.  Heat transfer enhancement for fin-tube heat exchanger using vortex generators , 2002 .

[5]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[6]  Koichi Nishino,et al.  Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers. , 2002 .

[7]  S. Lee,et al.  Heat transfer in a three-dimensional turbulent boundary layer with longitudinal vortices , 1999 .

[8]  Rui Li,et al.  Three-dimensional numerical study on fin-and-oval-tube heat exchanger with longitudinal vortex generators , 2009 .

[9]  Vinayak Eswaran,et al.  Heat transfer enhancement in cross-flow heat exchangers using oval tubes and multiple delta winglets , 2003 .

[10]  Giovanni Lozza,et al.  An experimental investigation of heat transfer and friction losses of interrupted and wavy fins for fin-and-tube heat exchangers , 2001 .

[11]  Dusan P. Sekulic,et al.  Heat Exchanger Design Procedures , 2007 .

[12]  Antonio Delgado,et al.  Optimization of the angle of attack of delta-winglet vortex generators in a plate-fin-and-tube heat exchanger , 2010 .

[13]  Chi-Chuan Wang,et al.  Comprehensive Study of Convex-Louver and Wavy Fin-and-Tube Heat Exchangers , 1998 .

[14]  Ruzhu Wang,et al.  Experimental comparison and analysis on silica gel and polymer coated fin-tube heat exchangers , 2010 .

[15]  Sinan Caliskan,et al.  Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator , 2010 .

[16]  Guobing Zhou,et al.  Experimental investigations of thermal and flow characteristics of curved trapezoidal winglet type vortex generators , 2012 .

[17]  Gongnan Xie,et al.  Parametric study and multiple correlations on air-side heat transfer and friction characteristics of fin-and-tube heat exchangers with large number of large-diameter tube rows , 2009 .

[18]  R. Shah.  COMPACT HEAT EXCHANGER SURFACE SELECTION METHODS , 1978 .

[19]  Chi-Chuan Wang,et al.  INVESTIGATION OF WAVY FIN-AND-TUBE HEAT EXCHANGERS: A CONTRIBUTION TO DATABANK , 1999 .

[20]  R. Blackwelder,et al.  Vortex generators used to control laminar separation bubbles , 1993 .

[21]  Franz J. Schulenberg,et al.  Finned Elliptical Tubes and Their Application in Air-Cooled Heat Exchangers , 1966 .

[22]  F. Saboya,et al.  Experiments on elliptic sections in one- and two-row arrangements of plate fin and tube heat exchangers , 2001 .

[23]  Wei-Mon Yan,et al.  HEAT TRANSFER AND FRICTION CHARACTERISTICS OF FIN-AND-TUBE HEAT EXCHANGERS , 2000, Proceeding of Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV.

[24]  R. Shah,et al.  Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress , 1995 .

[25]  A. London,et al.  Compact heat exchangers , 1960 .

[26]  M. Fiebig,et al.  Heat transfer enhancement of finned oval tubes with staggered punched longitudinal vortex generators , 2000 .

[27]  P.M.V. Subbarao,et al.  Experimental study of the effect of winglet location on heat transfer enhancement and pressure drop in fin-tube heat exchangers , 2005 .

[28]  Chi-Chuan Wang,et al.  Empirical correlations for heat transfer and flow friction characteristics of herringbone wavy fin-and-tube heat exchangers , 2002 .

[29]  M. Fiebig,et al.  Heat Transfer Enhancement by Wing-Type Longitudinal Vortex Generators and their Application to Finned Oval Tube Heat Exchanger Elements , 1999 .

[30]  Chi-Chuan Wang,et al.  Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part II: Correlation , 2000 .

[31]  Jiin-Yuh Jang,et al.  Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators , 2004 .

[32]  Jiangbo Wu,et al.  Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle , 2007 .

[33]  Yong-Heng Zhang,et al.  Comparison of heat transfer performance of tube bank fin with mounted vortex generators to tube bank fin with punched vortex generators , 2008 .

[34]  Martin Fiebig,et al.  Wing-type vortex generators for fin-and-tube heat exchangers , 1993 .

[35]  D. Beecher,et al.  Effects of fin pattern on the air side heat transfer coefficient in plate finned tube heat exchangers , 1987 .

[36]  Ralph L. Webb,et al.  Air-Side Heat Transfer in Finned Tube Heat Exchangers , 1980 .

[37]  Vinayak Eswaran,et al.  NUMERICAL PREDICTION OF HEAT TRANSFER IN A CHANNEL WITH A BUILT-IN OVAL TUBE AND VARIOUS ARRANGEMENTS OF THE VORTEX GENERATORS , 2003 .

[38]  C. Chang,et al.  Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers , 1997 .