Effects of support material on the pattern of volatile fatty acid accumulation at overload in anaerobic digestion of semi-solid waste

Abstract Anaerobic degradation of a semi-solid waste with a total solids content of 4% particulate matter, much of it insoluble, was investigated in four laboratory-scale reactors. Two of the reactors were equipped with different textile materials for immobilisation of microorganisms, while the other two were used as continuously-stirred-tank reactor references. A constant organic loading rate and hydraulic retention time were used in the start-up period; the hydraulic retention time was then decreased and the effects of this change were monitored. Volatile fatty acid (VFA) concentration and pH were chosen as indicators of the microbial status in the reactors. The reactors with support material showed a greater resistance to overload than did the continuously-stirred-tank reactors. This is in agreement with many studies undertaken on the anaerobic treatment of wastewater. However, no problems with clogging occurred, showing that a support material is also applicable in systems treating waste containing large amounts of insoluble, particulate matter. The pH was comparable to VFA for indicating an approaching process failure. However, the pattern of VFA accumulation was qualitatively different between the reactors with and without support material. Obviously the metabolic pattern of mixed cultures changes when the microorganisms are immobilised.

[1]  K. Wuhrmann,et al.  Kinetic parameters and relative turnovers of some important catabolic reactions in digesting sludge , 1978, Applied and environmental microbiology.

[2]  W. Shieh,et al.  Effects of microcarrier pore characteristics on methanogenic fluidized bed performance , 1992 .

[3]  D. T. Hill,et al.  Using volatile fatty acid relationships to predict anaerobic digester failure. , 1987 .

[4]  María Carmen Veiga,et al.  Start-Up, Operation, Monitoring and Control of High-Rate Anaerobic Treatment Systems , 1991 .

[5]  J. C. Converse,et al.  Improved alkalimetric monitoring for anaerobic digestion of high-strength wastes , 1986 .

[6]  Xiao Zhang,et al.  Measuring the usable carbonate alkalinity of operating anaerobic digesters , 1991 .

[7]  William A. Pretorius,et al.  pH-controlled feed-on-demand for high-rate anaerobic systems , 1994 .

[8]  G. K. Anderson,et al.  pH control in anaerobic treatment of industrial wastewater , 1992 .

[9]  Awwa,et al.  Standard Methods for the examination of water and wastewater , 1999 .

[10]  B. Kasapgil,et al.  Comparison of porous and non-porous media in upflow anaerobic filters when treating dairy wastewater , 1994 .

[11]  D. Archer.  The microbiological basis of process control in methanogenic fermentation of soluble wastes , 1983 .

[12]  G. vR. Moosbrugger,et al.  Weak acid/bases and pH control in anaerobic systems ― a review , 1993 .

[13]  U. Marchaim,et al.  Propionic to acetic acid ratios in overloaded anaerobic digestion , 1993 .

[14]  Sambhunath Ghosh.  Novel Processes for High-Efficiency Biodigestion of Particulate Feeds , 1986 .

[15]  D. T. Hill,et al.  VOLATILE FATTY ACID RELATIONSHIPS IN ATTACHED GROWTH ANAEROBIC FERMENTERS , 1991 .

[16]  D. Klass,et al.  Anaerobic acidogenesis of wastewater sludge. , 1975, Journal - Water Pollution Control Federation.

[17]  D. Defour,et al.  Field experience with different systems for biomass accumulation in anaerobic reactor technology , 1994 .

[18]  Marvin P. Bryant,et al.  Microbial Methane Production—Theoretical Aspects , 1979 .