Co-fabrication of nickel-YSZ cermet nanofibers via an electrospinning technique

[1]  V. C. Sousa,et al.  Electrical Properties of La0.6Sr0.4Co1–yFeyO3 (y = 0.2–1.0) Fibers Obtained by Electrospinning , 2016 .

[2]  S. Ramakrishna,et al.  Fabrication of NiO/zirconium oxide nanofibers by electrospinning. , 2014, Materials science & engineering. C, Materials for biological applications.

[3]  S. Senthil Kumar,et al.  Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: A review , 2014 .

[4]  J. Frade,et al.  Aqueous tape casting of micro and nano YSZ for SOFC electrolytes , 2013 .

[5]  Erqing Zhao,et al.  Electrospinning La0.8Sr0.2Co0.2Fe0.8O3−δ tubes impregnated with Ce0.8Gd0.2O1.9 nanoparticles for an intermediate temperature solid oxide fuel cell cathode , 2013 .

[6]  Tingshuai Li,et al.  Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape-casting process , 2012 .

[7]  Y. Choa,et al.  Synthesis and characterization of polycrystalline Sr, Mg-doped LaGaO3 nanowires using electrospinning method , 2012 .

[8]  F. Doğan,et al.  Effect of the anode microstructure on the enhanced performance of solid oxide fuel cells , 2012 .

[9]  N. Menzler,et al.  An intermediate-temperature solid oxide fuel cell with electrospun nanofiber cathode , 2012 .

[10]  Luping Li,et al.  Preparation of fibrous Ni-coated-YSZ anodes for solid oxide fuel cells , 2011 .

[11]  Toshio Suzuki,et al.  Impact of Anode Microstructure on Solid Oxide Fuel Cells , 2009, Science.

[12]  A. Nakajo,et al.  RedOx study of anode-supported solid oxide fuel cell , 2009 .

[13]  Naiqing Zhang,et al.  Improved SOFC performance with continuously graded anode functional layer , 2009 .

[14]  Z. Lü,et al.  Performance of an anode-supported SOFC with anode functional layers , 2008 .

[15]  R. Ziel,et al.  Quantification of the pore size distribution (porosity profiles) in microfiltration membranes by SEM, TEM and computer image analysis , 2008 .

[16]  Yumin Zhang,et al.  Hollow fibers of yttria-stabilized zirconia (8YSZ) prepared by calcination of electrospun composite fibers , 2008 .

[17]  Darrell H. Reneker,et al.  Effects of parameters on nanofiber diameter determined from electrospinning model , 2007 .

[18]  Darrell H. Reneker,et al.  Beaded nanofibers formed during electrospinning , 1999 .

[19]  E. Roncari,et al.  Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs , 2008 .