A transceiver for 800 kb/s full-duplex transmission over digital subscriber loops using a custom VLSI adaptive filter processor

Presents the design of a bidirectional 800 kb/s transceiver the enables data transmission for T1 services over unconditioned telephone wire facilities. The transceiver transmits a 4-level PAM line code (2B1Q) and uses a baud-spaced sampled receiver. The DSP-based transceiver utilizes a custom CMOS VLSI 64-tap LMS adaptive filter chip to provide echo cancellation and decision-feedback equalization. Error-free full-duplex transmission is achieved over 16 kft. of 24 AWG cable or 12 kft. of 26 AWG cable.<<ETX>>

[1]  John M. Cioffi,et al.  Capacity and cutoff rate of the digital subscriber loop with near end crosstalk noise , 1989, IEEE International Conference on Communications, World Prosperity Through Communications,.

[2]  Babak Daneshrad,et al.  A 60-MHz 64-tap echo canceller/decision-feedback equalizer in 1.2- mu m CMOS for 2B1Q high bit-rate digital subscriber line transceivers , 1991, Proceedings of the IEEE 1991 Custom Integrated Circuits Conference.

[3]  K. Mueller,et al.  Timing Recovery in Digital Synchronous Data Receivers , 1976, IEEE Trans. Commun..