Accuracy of Reactor Physics Parameters in Thorium-Loaded Accelerator-Driven System Experiments at Kyoto University Critical Assembly

Abstract Experiments on the thorium-loaded accelerator-driven system (ADS) were carried out at the Kyoto University Critical Assembly to reevaluate the accuracy of reactor physics parameters, including prompt neutron decay constants reaction rate distributions, subcriticality, and subcritical multiplication factor, and to reveal the dependency of these parameters on the external neutron source by varying the external neutron source of 14-MeV neutrons and spallation neutrons generated by 100-MeV protons. In preparation for thorium-loaded ADS experiments, renewed irradiation experiments are conducted with small and thin foils of thorium in the critical state to reevaluate the accuracy of the experimental analyses. In the ADS experiments, reactor physics parameters are found to be different in the same core when the external neutron source is injected separately with 14-MeV neutrons and spallation neutrons. By comparing with the calculated results, the significant impact of external neutron sources on the neutron characteristics of ADS is obtained in both the static and the kinetic experimental analyses.

[1]  H. Unesaki,et al.  Static and Kinetic Experiments on Accelerator-Driven System with 14MeV Neutrons in Kyoto University Critical Assembly , 2008 .

[2]  T. Fukahori,et al.  Validation of JENDL High-Energy File through Analyses of Spallation Experiments at Incident Proton Energies from 0.5 to 2.83 GeV , 2009 .

[3]  Tsuyoshi Misawa,et al.  Subcritical Multiplication Parameters of the Accelerator-Driven System with 100 MeV Protons at the Kyoto University Critical Assembly , 2012 .

[5]  Jae-Yong Lim,et al.  First Injection of Spallation Neutrons Generated by High-Energy Protons into the Kyoto University Critical Assembly , 2009 .

[6]  Hesham Shahbunder,et al.  Experimental analysis for neutron multiplication by using reaction rate distribution in accelerator-driven system , 2010 .

[7]  Massimo Salvatores,et al.  The Physics of Subcritical Multiplying Systems , 2002 .

[8]  C. Pyeon,et al.  A small high sensitivity neutron detector using a wavelength shifting fiber. , 2011, Applied radiation and isotopes : including data, instrumentation and methods for use in agriculture, industry and medicine.

[9]  F. Carminati,et al.  An energy amplifier for cleaner and inexhaustible nuclear energy production driven by a particle beam accelerator , 1993 .

[10]  Tsuyoshi Misawa,et al.  Mockup Experiments on the Thorium-Loaded Accelerator-Driven System at the Kyoto University Critical Assembly , 2014 .

[11]  Seiji Shiroya,et al.  Preliminary study on the thorium-loaded accelerator-driven system with 100MeV protons at the Kyoto University Critical Assembly , 2011 .

[12]  Carlo Rubbia,et al.  Conceptual design of a fast neutron operated high power energy amplifier , 1995 .

[13]  Keiji Kanda,et al.  Measurement of Prompt Neutron Decay Constant and Large Subcriticality by the Feynman-α Method , 1990 .

[14]  G. Rimpault,et al.  Neutronic Studies in Support of Accelerator-Driven Systems: The MUSE Experiments in the MASURCA Facility , 2004 .

[15]  Philip R. Page,et al.  ENDF/B-VII.0: Next Generation Evaluated Nuclear Data Library for Nuclear Science and Technology , 2006 .

[16]  庸雄 中川,et al.  JENDL dosimetry file 99 (JENDL/D-99) , 2002 .

[17]  Cheol Ho PYEON,et al.  Reaction Rate Analysis of Nuclear Spallation Reactions Generated by 150, 190, and 235MeV Protons , 2010 .

[18]  Y. Kurata,et al.  Neutronics Design of Accelerator-Driven System for Power Flattening and Beam Current Reduction , 2008 .

[19]  T. Gozani.  A MODIFIED PROCEDURE FOR THE EVALUATION OF PULSED SOURCE EXPERIMENTS IN SUBCRITICAL REACTORS , 1962 .