Damage Identification in Reinforced Concrete Beams Using Spatially Distributed Strain Measurements

AbstractBrillouin optical time domain reflectometry or analysis (BOTDR/A) is one of the strain measurement technologies that is suitable for smart monitoring of civil engineering infrastructures. Although the technology has the advantage of supplying spatially distributed data, it is currently limited to a spatial resolution of approximately 1 m. This infers that the technology may lack the ability to identify the exact type and source of damage; that is, different geometrical configurations of cracking within a concrete beam may lead to similar BOTDR/A readings, and hence, the exact nature of cracking might not be resolved. This study suggests different crack indicators and analytically and experimentally examines their correlations with BOTDR/A readings of damaged RC beams. The analytical part entails a finite-element based statistical analysis of hundreds of cracking cases in fractured RC beams and their effects on the simulated BOTDR/A readings. It is found from the analysis that the increase of curva...

[1]  Pj Bennett,et al.  Distributed Optical Fiber Strain Sensing in a Secant Piled Wall , 2007 .

[2]  X. Bao,et al.  Detection of cracks in a reinforced concrete beam using distributed Brillouin fibre sensors , 2010 .

[3]  B. Martín-Pérez,et al.  Strain monitoring in a reinforced concrete slab sustaining service loads by distributed Brillouin fibre optic sensors , 2010 .

[4]  Nestore Galati,et al.  Discontinuous Brillouin strain monitoring of small concrete bridges: comparison between near-to-surface and smart FRP fiber installation techniques , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[5]  H. Ohno,et al.  Industrial Applications of the BOTDR Optical Fiber Strain Sensor , 2001 .

[6]  Romeo Bernini,et al.  Distributed Strain Measurement along a Concrete Beam via Stimulated Brillouin Scattering in Optical Fibers , 2011 .

[7]  Assaf Klar,et al.  Tunneling effects on jointed pipelines , 2008 .

[8]  K. Wan,et al.  Applications of a distributed fiber optic crack sensor for concrete structures , 2007 .

[9]  Luc Thévenaz,et al.  Effect of pulse chirp on distributed Brillouin fiber sensing , 2008, International Conference on Optical Fibre Sensors.

[10]  L. Thévenaz,et al.  Brillouin gain spectrum characterization in single-mode optical fibers , 1997 .

[11]  Antonio Nanni,et al.  A Brillouin smart FRP material and a strain data post processing software for structural health monitoring through laboratory testing and field application on a highway bridge , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Pj Bennett,et al.  The use of fibre optic sensors to monitor pipeline response to tunnelling , 2006 .

[13]  Wei Zhang,et al.  The strain field method for structural damage identification using Brillouin optical fiber sensing , 2007 .

[14]  Y. Goldfeld.  Identification of the stiffness distribution in statically indeterminate beams , 2007 .

[15]  Assaf Klar,et al.  Feasibility study of automated detection of tunnel excavation by Brillouin optical time domain reflectometry , 2010 .

[16]  Pj Bennett,et al.  Distributed strain measurement for pile foundations , 2006 .