Optimization of process parameters of direct metal laser sintering process using fuzzy-based desirability function approach

[1]  B. Esakki,et al.  Modeling and prediction of optimal process parameters in wear behaviour of selective inhibition sintered high density polyethylene parts , 2018 .

[2]  V. Paserin,et al.  Laser powder bed fusion of water-atomized iron-based powders: process optimization , 2017 .

[3]  Vijay Mandal,et al.  Development of TiN particulates reinforced SS316 based metal matrix composite by direct metal laser sintering technique and its characterization , 2017 .

[4]  U. Ramamurty,et al.  Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting , 2017 .

[5]  Eusebio J. Martínez-Conesa,et al.  Optimization of geometric parameters in a welded joint through response surface methodology , 2017 .

[6]  E. Aghion,et al.  Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM) , 2017 .

[7]  Yong-qiang Yang,et al.  Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting , 2017 .

[8]  M. Benedetti,et al.  The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting. , 2017, Journal of the mechanical behavior of biomedical materials.

[9]  G. Barucca,et al.  Effects of build orientation and element partitioning on microstructure and mechanical properties of biomedical Ti-6Al-4V alloy produced by laser sintering. , 2017, Journal of the mechanical behavior of biomedical materials.

[10]  M. Öner,et al.  Investigating the effect of ultrasonic irradiation on synthesis of calcium carbonate using Box-Behnken experimental design , 2017 .

[11]  Jenn‐Ming Yang,et al.  Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing , 2016 .

[12]  Xin Tong,et al.  Microstructure and Mechanical Properties of 18Ni-300 Maraging Steel Fabricated by Selective Laser Melting , 2016 .

[13]  A. Beese,et al.  Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing , 2016 .

[14]  T. Becker,et al.  The achievable mechanical properties of SLM produced Maraging Steel 300 components , 2016 .

[15]  Yanjin Lu,et al.  Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application. , 2015, Materials science & engineering. C, Materials for biological applications.

[16]  Eleonora Atzeni,et al.  On the effect of process parameters on properties of AlSi10Mg parts produced by DMLS , 2014 .

[17]  C. Sanz,et al.  Structural integrity of direct metal laser sintered parts subjected to thermal and finishing treatments , 2013 .

[18]  M. Öner,et al.  Application of experimental design for the precipitation of calcium carbonate in the presence of biopolymer , 2013 .

[19]  Ming Gao,et al.  Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel , 2013 .

[20]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[21]  Gautam Majumdar,et al.  Optimization of bead geometry of submerged arc weld using fuzzy based desirability function approach , 2013, J. Intell. Manuf..

[22]  Jean-Pierre Kruth,et al.  Microstructure and mechanical properties of maraging steel 300 after Selective Laser Melting , 2010 .

[23]  J. Kruth,et al.  Part and material properties in selective laser melting of metals , 2010 .

[24]  Mostafa Khajeh,et al.  Application of Box-Behnken design in the optimization of a magnetic nanoparticle procedure for zinc determination in analytical samples by inductively coupled plasma optical emission spectrometry. , 2009, Journal of hazardous materials.

[25]  Y. Moon,et al.  Application of direct laser metal tooling for AISI H13 tool steel , 2009 .

[26]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[27]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[28]  Fritz Klocke,et al.  State-of-the-art Laser Additive Manufacturing for Hot-work Tool Steels , 2017 .

[29]  Alaa Elwany,et al.  Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel , 2017 .

[30]  Igor Drstvenšek,et al.  The Effect of Post-processing and Machining Process Parameters on Properties of Stainless Steel PH1 Product Produced by Direct Metal Laser Sintering☆ , 2016 .

[31]  Hemant Kumar,et al.  Experimental Investigation of Process Parameters for Rapid Prototyping Technique (Selective Laser Sintering) to Enhance the Part Quality of Prototype by Taguchi Method , 2016 .

[32]  Carlos Capela,et al.  Assessment of the fatigue life on functional hybrid laser sintering steel components , 2016 .

[33]  Evren Yasa,et al.  A Study on the Stair Stepping Effect in Direct Metal Laser Sintering of a Nickel-based Superalloy , 2016 .

[34]  Antonio Domenico Ludovico,et al.  Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel , 2015 .

[35]  Jean-Pierre Kruth,et al.  Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel , 2011 .

[36]  Ana Paula,et al.  DIRECT METAL LASER SINTERING (DMLS): TECHNOLOGY FOR DESIGN AND CONSTRUCTION OF MICROREACTORS , 2011 .

[37]  V. Leskovšek,et al.  Surface modifications of maraging steels used in the manufacture of moulds and dies , 2010 .

[38]  Taylan Altan,et al.  Manufacturing of Dies and Molds , 2001 .