Optimization of flux-cored arc welding process parameters by using genetic algorithm

The effect of flux-cored arc welding (FCAW) process parameters on the quality of the super duplex stainless steel (SDSS) claddings can be studied using Taguchi L9 design of experiments. In this experimental investigation, deposits were made with 30 % bead overlap. Establishing the optimum combination of process parameters is required to ensure better bead geometry and desired properties. The above objectives can be achieved by identifying the significant input process parameters as input to the mathematical models like welding voltage (X1), wire feed rate (X2), welding speed (X3), and nozzle-to-plate distance (X4). The identified responses governing the bead geometry are bead width (W) and height of the reinforcement (H). The mathematical models were constructed using the data collected from the experiments based on Taguchi L9 orthogonal array. Then, the responses were optimized using non-traditional nature-inspired technique like genetic algorithm (GA).

[1]  N. Murugan,et al.  Development of mathematical models for prediction of weld bead geometry in cladding by flux cored arc welding , 2006 .

[2]  P. De,et al.  Influence of nitrogen in the shielding gas on corrosion resistance of duplex stainless steel welds , 1999 .

[3]  D. K. Pratihar,et al.  Optimization of bead geometry in electron beam welding using a Genetic Algorithm , 2009 .

[4]  N. Murugan,et al.  Optimization of weld bead geometry for stainless steel claddings deposited by FCAW , 2007 .

[5]  N. Murugan,et al.  Effect of FCAW Process Parameters on Weld Bead Geometry in Stainless Steel Cladding , 2011 .

[6]  V. Gunaraj,et al.  Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes , 1999 .

[7]  John W. H. Price,et al.  Role of Welding Parameters Using the Flux Cored Arc Welding Process of Low Alloy Steels on Bead Geometry and Mechanical Properties , 2012, Journal of Materials Engineering and Performance.

[8]  M. Shamanian,et al.  Dilution and Ferrite Number Prediction in Pulsed Current Cladding of Super-Duplex Stainless Steel Using RSM , 2013, Journal of Materials Engineering and Performance.

[9]  A. K. Bhaduri,et al.  Optimising process parameters for gas tungsten arc welding of an austenitic stainless steel using genetic algorithm , 2010 .

[10]  Sundaravel Vijayan,et al.  Multiobjective Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy AA 5083 Using Taguchi-Based Grey Relation Analysis , 2010 .

[11]  Pedro Paulo Balestrassi,et al.  Mathematical Modeling of Weld Bead Geometry, Quality, and Productivity for Stainless Steel Claddings Deposited by FCAW , 2012, Journal of Materials Engineering and Performance.

[12]  Saurav Datta,et al.  Application of Taguchi philosophy for parametric optimization of bead geometry and HAZ width in submerged arc welding using a mixture of fresh flux and fused flux , 2008 .

[13]  Dilip Kumar Pratihar,et al.  Optimization and prediction of weldment profile in bead-on-plate welding of Al-1100 plates using electron beam , 2010 .

[14]  A. Noorul Haq,et al.  Flux Cored Arc Welding Parameter Optimization Using Particle Swarm Optimization Algorithm , 2012 .

[15]  P. S. Sivasakthivel,et al.  Prediction and optimization of depth of penetration for stainless steel gas tungsten arc welded plates using artificial neural networks and simulated annealing algorithm , 2011, Neural Computing and Applications.

[16]  T. Kannan,et al.  Effect of flux cored arc welding process parameters on duplex stainless steel clad quality , 2006 .

[17]  N. Murugan,et al.  Optimization of weld bead geometry in plasma transferred arc hardfaced austenitic stainless steel plates using genetic algorithm , 2009 .

[18]  Luis M. Torres-Treviño,et al.  Multi-objective optimization of a welding process by the estimation of the Pareto optimal set , 2011, Expert Syst. Appl..