2D high-lift airfoil noise measurements in an aerodynamic wind tunnel

[1]  Thomas F. Brooks,et al.  A Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) Determined from Phased Microphone Arrays , 2006 .

[2]  Jean Bulté.  Acoustic Array Measurements in Aerodynamic Wind Tunnels : A Subspace Approach for Noise Suppression , 2007 .

[3]  Eric Manoha,et al.  LEISA2: an experimental database for the validation of numerical predictions of slat unsteady flow and noise , 2015 .

[4]  V. Fleury,et al.  Optimization of Microphone Array Wall Mountings in Closed-Section Wind Tunnels , 2012 .

[5]  Fabien Mery.  S1MA High Speed Acoustic Measurement Devices for Open Rotor Mock Up , 2013 .

[6]  Lars Koop,et al.  Comparison of Microphone Array Measurements of an Airfoil with High-Lift Devices in Open and Closed Wind Tunnels , 2011 .

[7]  Renaud Davy,et al.  Beamforming-Based Noise Level Measurements in Hard-Wall Closed-Section Wind Tunnels , 2012 .

[8]  Siegfried Wagner,et al.  The Reflection Canceller - Phased Array Measurements in a Reverberating Environment , 2002 .

[9]  Jont B. Allen,et al.  Image method for efficiently simulating small‐room acoustics , 1976 .

[10]  Renaud Davy,et al.  Beamforming-based noise level dereverberation solution for S1MA sonic wind-tunnel : metrology, methodology and validation , 2015 .

[11]  Pieter Sijtsma,et al.  CORRECTIONS FOR MIRROR SOURCES IN PHASED ARRAY PROCESSING TECHNIQUES , 2003 .

[12]  J. Bulté,et al.  Reverberation cancellation in a closed test section of a wind tunnel using a multi-microphone cesptral method , 2014 .